3 ms·
GPUs run at a pretty low clock rate anyway (600Mhz-1100Mhz), should be able to get 300-400Mhz out of an FPGA, the main issue is interfacing with the GDDR memory
by sitkack 12y ago
GPUs run at a pretty low clock rate anyway (600Mhz-1100Mhz), should be able to get 300-400Mhz out of an FPGA, the main issue is interfacing with the GDDR memory, if you can.
There were some pushes for wafer scale stuff in the 80s [0], I think we are better suited from an algorithms, EDA and architecture standpoint now to actually make it work. A GPU is actually pretty good test bed and eventually GPU and FPGA functionality will merge into a single programmable compute fabric.
Yield on a wafer scale FPGA could actually be much better than a special purpose chip. The faulty logic elements / LUTs could just be marked as bad and not used.
[0] http://en.wikipedia.org/wiki/Wafer-scale_integration http://en.wikipedia.org/wiki/Wafer-scale_integration
- femto 12y agoI've got memories of a lab actually doing a wafer scale FPGA in the mid 90's. The reference escapes me, but if I can find it I'll post it. As you suggested, they preserved the yield by routing around defects. --- Edit: Or it might have been a PGA, rather than an FPGA.
- adwn 12y ago> GPUs run at a pretty low clock rate anyway (600Mhz-1100Mhz), should be able to get 300-400Mhz out of an FPGA An ASIC (GPUs are ASICs) running at 300 MHz can do a lot more per cycle than an FPGA at the same technology node running at the same frequency. A lot. Think order-of-magnitude more. > The faulty logic elements / LUTs could just be marked as bad and not used. This will screw up your timing, unless you reserve more setup slack (which in turn hurts the achievable performance).