2 ms·
You can have just the PCB part (without components) made at any of the places on this page: http://www.ladyada.net/library/pcb/manufacturers.html http://www.la
by noonespecial 14y ago
You can have just the PCB part (without components) made at any of the places on this page:
http://www.ladyada.net/library/pcb/manufacturers.html http://www.ladyada.net/library/pcb/manufacturers.html
You'll have to buy the connectors and solder them on yourself.
It sounds like an adapter kit might have a little market when shipped with a displayport plug, a small power supply, and a fully assembled PCB. Small kickstarter?
- joezydeco 14y agoYou'll have to buy the connectors and solder them on yourself. Just FYI, those SMT flexible-printed-circuit connectors are a bitch to get soldered onto a PCB correctly. You might survive with a lot of flux and a very thin tip (and a microscope since the plastic will melt at a pretty low temp. No mistakes allowed). You might do a little better with a hot air gun. But this is not level-1 soldering.