9 ms·
Simple screw counter
- nehal3m 7mo agoPush button, nut.
- abstractspoon 7mo agoInsane!
- chrsstrm 7mo ago>> I have wasted a significant chunk of my life counting out small numbers of parts into bags and posting them to people. So, small parts like this are always counted by weight, and I'm wondering why you would spend so much time on a counting solution when "buy a scale" is right there.
- kamaal 7mo agoUntil counting machines got ubiquitous, banks in India would count notes/bills by weight as well. It wasn't very precise but you could move a lot of money in ball park with this method. Atleast internally across branches.
- ghshephard 7mo agoUp to roughly 100 bills it's pretty much bang on - even with a cheap $10 scale (American Weigh Scales Digital Pocket Scale has a bunch of different options). Each bill weights roughly 1 gram. So - accurate to within 1% - and presumably the banks have better scales.
- eru 7mo agoI suspect at scale (moving either a lot of batches or large batches), you also need to take variance into account more. Some bills might be dirty or have stuff stuck to them, some bills might be damaged and have bits missing? And other things that occur in practice that I can't think of from the comfort of my armchair in 30s.
- jstanley 7mo agoHe's counting out like 6 at a time. He needs a fast way to pick small quantities precisely, not a fast way to check large quantities. Once they're picked they're easily verified by eye.
- bravoetch 7mo agoYes it's by weight when you need exactly 20k tiny screws in a box. But when you need six that won't save you any time.
- DaanDL 7mo agoThen just use a small cup to scoop out some screws.
- ssl-3 7mo agoHe needs 6 screws at a time, and the goal is to save time compared to counting manually. I'd guess that 7 would probably be fine occasionally -- maybe even 8 from time to time if the process is fast enough. I'd further guess that 9 screws is a non-starter (screws are inexpensive, but 9 represents 50% waste, which is quite a lot). The lower limit is hard-set at 6 because the kits that he's producing and selling require exactly 6 of these screws for end-user assembly. A small cup that would reliably scoop out at least 6 screws and no more than 7 or 8 screws sounds like a simple and elegant concept. What does this cup look like? Is it faster to use this cup than counting by hand is? (Is it faster than the reproducible screw counter that he's already built?)
- rkangel 7mo agoIn volume, small parts are dispensed by carefully designed machines, and then the result is counted by weight. You still need control of the dispensing, and as he's putting in small numbers of items the counting is the easy bit.
- imtringued 7mo agoA scale doesn't help with dispensing the parts. You've changed a tool based process back into a fully manual process.
- earleybird 7mo agoIn a similar vein: https://www.youtube.com/@christopherhelmke https://www.youtube.com/@christopherhelmke
- blorenz 7mo agoAwesome solve!!! Lasers and 3d printing is my side hobby business and is what keeps my sanity intact. I love seeing the practical creations that are realized by them! One of my core tenets is being self-sufficient and achieving efficiencies. This post is exactly that. Well done.
- kennywinker 7mo agoI love this so much. Such simple machines, for human-scale problems. I often get pulled down rabbit holes of machines and automation - this is a nice reminder that you can solve a lot of problems without reaching for an arduino or a servo.
- bschwindHN 7mo ago> You can probably guess my opinions on it though, the software is very good but the cloud-based vendor lock-in is grating, and the free tier is hobbled beyond the point of usefulness. On the plus side, being browser-based, it works perfectly on Linux. > The 1.1 release of FreeCAD should be soon. I really want FreeCAD to succeed, but blimey they have a big hill to climb. My fingers are crossed. Since these parts mostly seem to be laser cut acrylic (so mostly 2D), it seems like solvespace would do a good job at cranking out the designs. I haven't used it for a larger project like this though, maybe it was already considered.
- Doxin 7mo agoFor what it's worth I've been using FreeCad 1.1RC2 lately, and for me it's the first FreeCad version worth bothering with. It's now a tool I actively reach for over OpenSCAD and Blender for various projects. Previously I couldn't make the simplest part with it. I can't wait for the release proper, but I can heartily recommend everyone try the release candidates as well. I've got a feeling this is the tipping point for FreeCad like 2.5 was for blender.
- bschwindHN 7mo agoI'll give it a shot, I remember absolutely hating FreeCAD's UI last time I tried it.
- Doxin 7mo agoI mean I'll be honest, it's still a car crash of a program, but at least it's now a usable car crash. I've found the following workflow to be pretty good, using the part design workbench: - create a part - create a body - create a sketch - pad/pocket/revolve/etc - repeat with additional sketches to taste I've also been using the proxy object thing, I forget the name, the button is a green blob, to "import" geometry from a master sketch into more specific sketches.
- bschwindHN 7mo ago
- sudo_cowsay 7mo agoa small scale problem = assisting device a medium scale problem = a better assisting device a large scale problem = hire people
- ramses0 7mo agoI want to pitch to my local makerspace "log-10" manufacturing. Basically there's a ton of traction at the zero-to-one (making the first prototype) and then you start looking at how to "scale" your manufacturing (ie: making 10 at a whack), and then eventually you MAY get to building/assembling 100 at a whack, and up to 1000's or more (where you'd "graduate" to partnering with a "real" manufacturer). Maybe it's just the way that I'm wired, but I've done 3-4 projects where I've gone down the B.O.M. rabbit hole and have scaled to at least 100 assembled/packaged items. It seems like a local makerspace is the perfect launch-pad for having flexible "staff" (ie: other makerspace members) that can handle ambiguity and would be invested in the success of a locally owned/managed product!
- LiamPowell 7mo ago> the (OnShape) free tier is hobbled beyond the point of usefulness. The free tier is identical to the standard tier except you can not create private documents and it has a no commercial use clause. This has been the case for many years, so I'm not sure where "hobbled beyond the point of usefulness" is coming from.
- regularfry 7mo agoThis is a commercial use, isn't it? Might be clumsily worded, but it's out of the running for that reason alone.
- irjustin 7mo agoAt scale, use weight and supply 1 or 2 extra. This is how pretty much every IKEA, LEGO, etc works with very small, cheap parts. End users benefit because it's easy to drop/lose/break one.
- medi8r 7mo agoOr a vibrating seperator which can give perfect counts if needed.
- kristianp 7mo agoSo that explains why the smallest parts often have spares in ikea and lego builds. Is this done because of the error in weighing the smallest parts, so they have a margin for error by allowing for an extra 1 or 2?
- irjustin 7mo ago> Is this done because of the error in weighing the smallest parts, so they have a margin for error by allowing for an extra 1 or 2? This is a secondary benefit, the primary benefit is if the end user loses/breaks one. That part very well could be show stopper (Ikea 110630 anyone?). Now the end user is stuck - has to call, you have to ship, do you charge? do you give for free? they have to wait. they're annoyed, you're annoyed. No one is happy. The supply chain headaches for giving exact number of tiny parts is terribly expensive, relatively speaking. So you give spares because in the long run it's way cheaper.
- conductr 7mo agoJust tacking on to mention the smallest parts are most likely to be lost, they’re the ones that - if dropped - seem to bounce and roll under a refrigerator or into the ether. They don’t give extras on the larger parts because they’re not likely to be lost. Frequently enough all it takes is a violent/careless bag opening to send the small pieces flying.
- tclancy 7mo agoBeing aware of this, I am waiting for a solution to what to do with the leftovers besides chuck them into a landfill. The problem, of course, is scale. No one is mailing 3 screws and an Allen wrench anywhere. Maybe once you hit 5 pounds of spare Lego . . .
- schobi 7mo agoA beautiful balance of effort and benefit. I don't know any better, but the screw counting mechanism seems awkward. Imagine the set has 10 components.. I'm surprised there is no standard solution to this - like a tape and reel solution? A counting and dispensing gun that works for different sizes? But how much more would anyone pay for M3 bolts on a tape? Helmke had a tube feeding his dispensers in one of the videos, with bolts lengthwise. That tube idea could be used for a manual dispenser - imagine a drink dispenser, but giving 3 bolts. Maybe easier to store away, but just as awkward to load.
- schobi 7mo agoChristopher Helmke just shared another trick https://youtu.be/tSvwcUbL95Q?si=YunTp0p5Duu754cX https://youtu.be/tSvwcUbL95Q?si=YunTp0p5Duu754cX It is a clever mechanism to separate a wide range of parts. Like a vi Rating feeder, but without adjusting the device for different object sizes. It is a rotating tube, slightly angled. How would that help? Say - you have just one tube to seperate parts. You drop your first box of washers and route them into a sequential storage. They you do the next box with bolts on the same device and drop them into another sequential storage. They dispensing remainds still manual as mitxela showed.
- Animats 7mo agoThat's very nice. The nut dispenser is very effective. Small, and feeds well. The screw dispenser is starting to run into jamming problems. It will probably start to jam more as the acrylic gets scratched and friction becomes worse. But it's manual and low volume, so jamming isn't a big issue. He's discovered that dispensing is easy, but order from chaos is harder. There's a whole theory of feeder design.[1] There are clever tricks to orient strangely shaped parts using feeders made from passive components. A basic trick is to get parts aligned in one axis, then arrange it so that the ones that are backwards or upside down hit some obstacle or are not supported, so they fall back down for another try. [1] https://www.youtube.com/watch?v=ZlyuHIxSC-A https://www.youtube.com/watch?v=ZlyuHIxSC-A
- ssl-3 7mo agoThe nut dispenser is awesome. It occurs to me that the screw counter's main difficulty is in orientating the screws. The machine does solve that (as a product of all the shaking and jostling and doubtless unjamming), but judging by the length of the feeder tube it's not a very fun step. And the end goal isn't to have screws that are each oriented in exactly the same way, but instead to have a specific quantity of screws placed in each of a series of containers. All of that effort to orient them so precisely does make them easy to count using the nut dispenser mechanism, but that effort is otherwise ultimately discarded. I'm lead to wonder if the process of dispensing 6 screws could be accomplished more simply (ie, with less fiddling and shaking) by reducing the amount of orientation necessary. Perhaps by using a sorter that puts the screws in a line, axially, without a preference for heads-first or threads-first orientation?
- Animats 7mo ago> Perhaps by using a sorter that puts the screws in a line, axially, without a preference for heads-first or threads-first orientation? Here's a vibratory bowl feeder doing exactly that.[1] This is the industry standard way to solve this problem. Look what happens once the screws are lined up without a preference for heads-first or threads-first. A very simple slotted rack gets them all from horizontal to heads-up. As is usual with such feeders, if something doesn't land where it's supposed to, it falls back into the bowl for another try. That's the anti-jam mechanism. 3D printing vibratory bowl feeders works.[2] Useful for when you need to handle thousands, but not millions. This is more scale than the clockmaker needs, though. Unless his business scales up. [1] https://www.youtube.com/watch?v=kIPNdrbSYM4 https://www.youtube.com/watch?v=kIPNdrbSYM4 [2] https://www.youtube.com/watch?v=ECx6L7z0T4Y https://www.youtube.com/watch?v=ECx6L7z0T4Y
- chinathrow 7mo agoOh come on, now I want that clock. https://mitxela.com/shop/clock4 https://mitxela.com/shop/clock4
- precompute 7mo agoWow, that's so cool!
- projektfu 7mo agoWhen we count pills, we use a simple device that has a flat part and a channel to count into. A hockey-stick-like spatula moves pills into the channel. The excess is poured back into the bottle the opposite way and the channel is then emptied into the bottle. I count in multiples of 3 so I don't lose my place. The last number is unique for every 30. https://share.google/VshUpiSioUh6rLg4q https://share.google/VshUpiSioUh6rLg4q (Image link)
- TimedToasts 7mo agoCan you explain the counting a bit more? I interpreted it as: For every three pills I put into the channel, I add +1 to my internal count. "The last number is unique for every 30" means... if you have a mental count of 13, you have 39 pills channeled? I didn't quite follow...
- niloc132 7mo agoIf you count by threes, the ones place is unique until you pass each multiple of 30 - 3, 6, 9, _8, _1, _4, where was I? I hadn’t made it to 30, ends with a 4, must be 24. 27, 30, 33, _6… Serves as a sort of checksum, as long as you know roughly how many you have and just the last digit.
- projektfu 7mo agoCouldn't have described it better myself.
- musahamza 7mo ago[dead]
- tomcam 7mo ago> during the endless toil I dreamed up a gun that could shoot out six nuts at a time. So glad my ex didn’t have one of these
- jacobedawson 7mo agoSoon to be banned in the UK no doubt
- riskable 7mo agoMm, yes. Needs an age verification check.
- m3kw9 7mo agohe just needed a 15 second video, and he spoke 3000words instead
- deleted 7mo ago[deleted]
- CagedJean 7mo ago[dead]