11 ms·

The best SSD purchases of my life was the last Intel X-25E (64GB 45nm SLC with 100.000 writes per bit from 2011) I found on ebay ~2021. I ordered one first exp

by bullen 1y ago

The best SSD purchases of my life was the last Intel X-25E (64GB 45nm SLC with 100.000 writes per bit from 2011) I found on ebay ~2021. I ordered one first expecting it to be used or fake, but the packaging looked good (original and untampered) and the Intel disk software said it had only factory number of read/writes so I went all in and bought all the disks they had... 30x at $100 instead of the original $1.000 price tag. Still $3.000 sounds like an aweful lot when it's only 64GB disks, but I know how it feels when your OS drive corrupts and that's not something I want to keep experiencing over and over every 5 (if you are lucky) years. Now with a few (24/7 operation) years under their belt I can confidently say this was exactly "How to buy a SSD".

justsomehnguy 1y ago
> I can confidently say this was exactly "How to buy a SSD". More like "How to spend $3k and think you did something". For this amount what you spent you could get any, literally any SSD, use only 64Gb and be fine for decades. Or use more than 64Gb and be fine for... decades anyway. You literally could buy a server class mixed workload SATA drive with a DWPD of 4. https://www.solidigm.com/products/data-center/d3/s4620.html https://www.solidigm.com/products/data-center/d3/s4620.html And quite amusingly, any modern SATA SSD runs at the top of SATA3/SATA600 specs, with ~500MB/s for read and write: Sequential Bandwidth - 100% Read (up to): 550 MB/s Sequential Bandwidth - 100% Write (up to): 500 MB/s Random Read (100% Span): 85000 IOPS Random Write (100% Span): 48000 IOPS While Intel® X25-E Extreme SATA Solid-State Drive is SATA2/SATA300 and runs at 250MB/s at reading: Sustained sequential read: up to 250 MB/s Sustained sequential write: up to 170 MB/s Random 4 KB reads: >35,000 IOPS Random 4 KB writes: >3,300 IOPS https://download.intel.com/newsroom/kits/ssd/pdfs/Extreme-SATA-SSD-ProductBrief.pdf https://download.intel.com/newsroom/kits/ssd/pdfs/Extreme-SA...
- bullen 1y ago
  You would think that, but I also have Samsungs industrial 3.5TB drives and they are flaky at best. Eternal growth does not exist, SSDs peaked in 2011 for durability without complexity. Just like DDR3 has the lowest CAS latency with ok bandwidth and longevity. DDR4 actually breaks after 10 years. DDR2 probably lasts more than 100 years. Think about that, any device manufactured in the coming 50 years will be outlived by 32-bit Raspberry 2! You just need a bunch of older SD cards and distributed storage so that you don't loose data.
  - stavros 1y ago
    I don't use SSDs, but the HDDs in my NAS started failing one by one after a few years. Whenever one failed, I just put a new one in, and that was it. ZFS rebalanced things automatically and I went on with my life. It just sounds like you spent $3k to solve a problem you could have solved with $200... Unrelatedly, does the name "Realms of Despair" mean anything to you?
    - bullen 1y ago
      HDDs make noise, you can only use them if you have more rooms than you need. Nope
      - stavros 1y ago
        But my argument was "a failing disk can just be swapped for another one with zero other hassle".
        bullen 1y ago
        It might work for file storage, but I don't think the OS drives can be raided in a way that is hotswappable?
        stavros 1y ago
        If your OS supports ZFS, I think you can, but I always put a lightweight OS on a separate drive, as it's for a NAS.
      - alt227 1y ago
        Everyone has a closet or cupboard under the stairs where a NAS can live. it doesnt need a room of its own.
  - gruez 1y ago
    >Just like DDR3 has the lowest CAS latency with ok bandwidth and longevity. Source? AFAIK successive generations eventually had the same or slightly CAS latency in absolute terms. However, because CAS latency is measured in clock cycles, and successive generations have higher clock speeds, the latency "number" is higher, but that's an illusion. DDR3-1600 CL8 has the same latency as DDR4-3200 CL16. >DDR2 probably lasts more than 100 years. >Think about that, any device manufactured in the coming 50 years will be outlived by 32-bit Raspberry 2! What's the point of it lasting 100 years if it's terribly out of date? An IDE drive from the 2000s is basically unusable today, 20 years later. CPU from around the same era is basically on its last legs because software support is being dropped[1]. Your SSDs are going to suffer the same fate. And that's not even factoring in other considerations like power consumption, and the hassle of trying to connect 30 drives to a computer. [1] eg. https://www.reddit.com/r/linux/comments/18mrxjk/debian_end_of_i386_support_is_on_its_way/ https://www.reddit.com/r/linux/comments/18mrxjk/debian_end_o...
- Panzer04 1y ago
  Assuming pcie SSDs are acceptable, they could have bought an optane drive with 60 drive write per day for five years endurance XD SSDs today have lower ratings because very few (consumer) use cases would prefer more write endurance over +100/50/33% capacity from more bits per cell.
  - bullen 1y ago
    I looked at those, too expensive and hard to use one drive on 30 computers.
Panzer04 1y ago
Are you joking? You bought 30 64GB SSDs from 2010 in 2021? You realise 3k buys you much faster, much higher capacity modern SSDs with the same longevity characteristics? Hell, if it really matters there's still some optane floating around, with 100k cycle endurance ratings and much, much better performance.
- krackers 1y ago
  Not the same longevity characteristics, I thought newer SSDs are TLC compared to SLC of old SSDs
  - Panzer04 1y ago
    Typically true. The more expensive the drive the more likely it'll be MLC or SLC, and if you're willing to go out of spec it's usually possible to reprogram a drive controller to operate in SLC mode.
Havoc 1y ago
Big fan of 2nd hand enterprise SSDs strategy too but wow not like that. The slightly more modern intel MLCs like S3700 crush the early SLCs across the board - including endurance. Would have cost you 1/3rd the price for vastly superior specs.
- bullen 1y ago
  No MLC lasts 5 years tops. I have 5x SLC (40-60GB) drives from 2010 still running. Not a single SLC has failed for me ever. I also have 5x MLC (120-400GB ones) drives that failed. All MLC have failed for me. The stats don't look too good.
  - justsomehnguy 1y ago
    Depends on the usage and the initial claimed DWPD. I've seen Samsung 860 Pro (DWPD of 0.6) doing fine after years under LUKS (the worst case for SSD). As soon as you go for DWPD > 1 (real or effective) the wearout is not a problem.
    - hangonhn 1y ago
      Why is LUKS bad fro SSDs? I'm thinking of using LUKS for my USB thumb drive.
      - spydum 1y ago
        it's not. I think there were some corner cases where the storage controller or SSD may use compression, in which.. the random nature of LUKS would cause more writes, but I'm not sure thats a real concern.
      - justsomehnguy 1y ago
        LUKS as any other encryption encrypts the whole device, which means your whole drive is filled with a white noise and you lose TRIM. It would be fine for the occassional write operations but if you use it for the system drive you are effectively run with the write amplification 24/7 (for a server and my example up there was for the server, not for a notebook which would have only 8-12 hours of operation a day at most). So it boils down for the usage pattern.

by bullen 1y ago

justsomehnguy 1y ago

> I can confidently say this was exactly "How to buy a SSD". More like "How to spend $3k and think you did something". For this amount what you spent you could get any, literally any SSD, use only 64Gb and be fine for decades. Or use more than 64Gb and be fine for... decades anyway. You literally could buy a server class mixed workload SATA drive with a DWPD of 4. https://www.solidigm.com/products/data-center/d3/s4620.html https://www.solidigm.com/products/data-center/d3/s4620.html And quite amusingly, any modern SATA SSD runs at the top of SATA3/SATA600 specs, with ~500MB/s for read and write: Sequential Bandwidth - 100% Read (up to): 550 MB/s Sequential Bandwidth - 100% Write (up to): 500 MB/s Random Read (100% Span): 85000 IOPS Random Write (100% Span): 48000 IOPS While Intel® X25-E Extreme SATA Solid-State Drive is SATA2/SATA300 and runs at 250MB/s at reading: Sustained sequential read: up to 250 MB/s Sustained sequential write: up to 170 MB/s Random 4 KB reads: >35,000 IOPS Random 4 KB writes: >3,300 IOPS https://download.intel.com/newsroom/kits/ssd/pdfs/Extreme-SATA-SSD-ProductBrief.pdf https://download.intel.com/newsroom/kits/ssd/pdfs/Extreme-SA...

bullen 1y ago
You would think that, but I also have Samsungs industrial 3.5TB drives and they are flaky at best. Eternal growth does not exist, SSDs peaked in 2011 for durability without complexity. Just like DDR3 has the lowest CAS latency with ok bandwidth and longevity. DDR4 actually breaks after 10 years. DDR2 probably lasts more than 100 years. Think about that, any device manufactured in the coming 50 years will be outlived by 32-bit Raspberry 2! You just need a bunch of older SD cards and distributed storage so that you don't loose data.
- stavros 1y ago
  I don't use SSDs, but the HDDs in my NAS started failing one by one after a few years. Whenever one failed, I just put a new one in, and that was it. ZFS rebalanced things automatically and I went on with my life. It just sounds like you spent $3k to solve a problem you could have solved with $200... Unrelatedly, does the name "Realms of Despair" mean anything to you?
  - bullen 1y ago
    HDDs make noise, you can only use them if you have more rooms than you need. Nope
    - stavros 1y ago
      But my argument was "a failing disk can just be swapped for another one with zero other hassle".
      - bullen 1y ago
        It might work for file storage, but I don't think the OS drives can be raided in a way that is hotswappable?
        stavros 1y ago
        If your OS supports ZFS, I think you can, but I always put a lightweight OS on a separate drive, as it's for a NAS.
    - alt227 1y ago
      Everyone has a closet or cupboard under the stairs where a NAS can live. it doesnt need a room of its own.
- gruez 1y ago
  >Just like DDR3 has the lowest CAS latency with ok bandwidth and longevity. Source? AFAIK successive generations eventually had the same or slightly CAS latency in absolute terms. However, because CAS latency is measured in clock cycles, and successive generations have higher clock speeds, the latency "number" is higher, but that's an illusion. DDR3-1600 CL8 has the same latency as DDR4-3200 CL16. >DDR2 probably lasts more than 100 years. >Think about that, any device manufactured in the coming 50 years will be outlived by 32-bit Raspberry 2! What's the point of it lasting 100 years if it's terribly out of date? An IDE drive from the 2000s is basically unusable today, 20 years later. CPU from around the same era is basically on its last legs because software support is being dropped[1]. Your SSDs are going to suffer the same fate. And that's not even factoring in other considerations like power consumption, and the hassle of trying to connect 30 drives to a computer. [1] eg. https://www.reddit.com/r/linux/comments/18mrxjk/debian_end_of_i386_support_is_on_its_way/ https://www.reddit.com/r/linux/comments/18mrxjk/debian_end_o...
Panzer04 1y ago
Assuming pcie SSDs are acceptable, they could have bought an optane drive with 60 drive write per day for five years endurance XD SSDs today have lower ratings because very few (consumer) use cases would prefer more write endurance over +100/50/33% capacity from more bits per cell.
- bullen 1y ago
  I looked at those, too expensive and hard to use one drive on 30 computers.

Panzer04 1y ago

Are you joking? You bought 30 64GB SSDs from 2010 in 2021? You realise 3k buys you much faster, much higher capacity modern SSDs with the same longevity characteristics? Hell, if it really matters there's still some optane floating around, with 100k cycle endurance ratings and much, much better performance.

krackers 1y ago
Not the same longevity characteristics, I thought newer SSDs are TLC compared to SLC of old SSDs
- Panzer04 1y ago
  Typically true. The more expensive the drive the more likely it'll be MLC or SLC, and if you're willing to go out of spec it's usually possible to reprogram a drive controller to operate in SLC mode.

Havoc 1y ago

Big fan of 2nd hand enterprise SSDs strategy too but wow not like that. The slightly more modern intel MLCs like S3700 crush the early SLCs across the board - including endurance. Would have cost you 1/3rd the price for vastly superior specs.

bullen 1y ago
No MLC lasts 5 years tops. I have 5x SLC (40-60GB) drives from 2010 still running. Not a single SLC has failed for me ever. I also have 5x MLC (120-400GB ones) drives that failed. All MLC have failed for me. The stats don't look too good.
- justsomehnguy 1y ago
  Depends on the usage and the initial claimed DWPD. I've seen Samsung 860 Pro (DWPD of 0.6) doing fine after years under LUKS (the worst case for SSD). As soon as you go for DWPD > 1 (real or effective) the wearout is not a problem.
  - hangonhn 1y ago
    Why is LUKS bad fro SSDs? I'm thinking of using LUKS for my USB thumb drive.
    - spydum 1y ago
      it's not. I think there were some corner cases where the storage controller or SSD may use compression, in which.. the random nature of LUKS would cause more writes, but I'm not sure thats a real concern.
    - justsomehnguy 1y ago
      LUKS as any other encryption encrypts the whole device, which means your whole drive is filled with a white noise and you lose TRIM. It would be fine for the occassional write operations but if you use it for the system drive you are effectively run with the write amplification 24/7 (for a server and my example up there was for the server, not for a notebook which would have only 8-12 hours of operation a day at most). So it boils down for the usage pattern.