4 ms·

Semiconductor manufacturing, especially using EUV, is a staggeringly power-hungry process. The EUV light production requires more than a megawatt by itself bec

Semiconductor manufacturing, especially using EUV, is a staggeringly power-hungry process. The EUV light production requires more than a megawatt by itself because of all the losses involved. No doubt this is why they only report on embodied carbon since it’s the one metric they can win on.

amelius 1y ago
But a spinning harddrive contains electronics too ...
- cheschire 1y ago
  HDDs use much simpler electronics than SSDs. The controller in a hard drive mostly just moves the read/write head and spins the motor. It doesn’t need to do much processing. These chips are built on older manufacturing processes that are cheaper and less energy intensive. SSDs though need a fast processor to manage the flash memory for wear leveling, error correction, and keeping track of where everything is written etc. This requires more advanced chips, built on newer process nodes, which take a lot more energy and resources to make. And SSDs also need extra chips like DRAM and obviously the flash memory itself.
  - whatevaa 1y ago
    DRAM is optional on NVME SSD's which can use host memory instead. DRAM-less SATA SSD's sucked.
  - kvemkon 1y ago
    HDD controller calculates and checks ECC either and en/decodes the user's 0/1-bits to the 0/1-bits actually to be written on the platter but at much smaller speed (0.3 GB/s vs 14 GB/s SSD max). HDD has an extra servo controller. HDD has an extra 512 MB - 1 GB DRAM. WD HDDs 20 GB+ have some FLASH inside for metadata offload.
  - dezgeg 1y ago
    Is the controller really going to be that much simpler on a HDD? On HDD you still have things like command queuing, caching, checksumming and bad block remapping just as with SSD. Sure you don't have the flash translation layer, but I'd expect processing of the analog signal going to/from the heads to be a processing headache too. I wouldn't be surprised if they have to do temperature compensation and factory and/or runtime calibration of the analog path. Of course much of that will be done in fixed-function custom hardware blocks, but almost certainly so would a SSD for eg. ECC calculations. https://spritesmods.com/?art=hddhack&page=3 https://spritesmods.com/?art=hddhack&page=3 has some data points on a 10+ year old HDD - 3 ARM9 feroceon cores + Cortex-M3 core. Doesn't sound too simple.
- PaulKeeble 1y ago
  A HDD has 1 controller chip and that controller is relatively simple compared to the controller chip on an SSD, its certainly a lot smaller and on a less advanced process because it has to deal with ~200MB/s not 15000MB/s. On top of the controller chip a 2280 NVMe SSD will have 4 or 8 memory chips as well, which are on a recent process and have many many layers stacked together. Then the SSD will also often have a DRAM chip as well. An SSD uses substantially more silicon than a HDD does.
  - reginald78 1y ago
    Not disputing your broader point necessarily, but don't hard drives also include memory for cache while dram cache has become less and less common on SSDs? (to point where it is now uncommon on new SSD devices)
    - PaulKeeble 1y ago
      Yes they do. A consumer HDD from Seagate seems to have about 512MB whereas an SSD from Samsung seems to use 2GB.
jillesvangurp 1y ago
Not all energy is carbon intensive. Using a lot of power is fine as long as you get the power in a sustainable way. That isn't necessarily true for a lot of current production. But that's changing rapidly. Especially in the parts of the world where this stuff is produced.
- eru 1y ago
  If you are part of a large grid, power is fairly fungible (within that grid).
  - rob_c 1y ago
    Nope. Again look at Spain, not all power sources are equal and just because it's been connected to a network doesn't magically mean all of the load is then spread between all sinks. If your high school science teacher told you so, they were wrong. It's time to talk about proper grown up electronics in this discussion.
    - eru 1y ago
      I was including the weasel world 'fairly' in front of 'fungible' exactly because I foresaw such a discussion. To be slightly more precise and wordy in what I wanted to express: The original comment said: > Not all energy is carbon intensive. Using a lot of power is fine as long as you get the power in a sustainable way. And that's true. You can buy 'green electricity' from the grid. But that mostly just means that the people who don't care get allocated a larger fraction of 'non-green' electricity. (That works, until you lose enough of that buffer of people who don't care where they electricity is coming from, that you have more demand for green electricity than is available on the grid. Then you actually need to spin up more green electricity or raise prices for that 'colour'.) Yes, there's different demand levels over time (throughout the day, and throughout the year etc), and different demanders need different reliability levels. And all the power sources have different profiles for when they are available, and how easy (or hard or impossible) it is to turn them on or off on short notice. > If your high school science teacher told you so, they were wrong. It's time to talk about proper grown up electronics in this discussion. Haha, right.
estebank 1y ago
I think the interaction of "thing is cheap" and "thing is tiny" break all of our heuristics for "thing is difficult and energy intensive to produce".
PaulKeeble 1y ago
The thing is that anything electrical energy intense is going to become less CO2 producing every year as energy systems transition. Its the use of Iron and other necessary fuel usage that will become the CO2 intense items over the next 5 to 10 years. The energy usage wont be the issue and CO2e for production of any item is going to drop quite drastically.
- im3w1l 1y ago
  Iron and steel can be made without fossil fuels. It's just more expensive.
wtallis 1y ago
Is anyone using EUV for SSDs? I don't think it's economical for NAND manufacturing. I'm not sure if SSD controllers are using EUV yet; they usually aren't on leading-edge process nodes.

amelius 1y ago

But a spinning harddrive contains electronics too ...

cheschire 1y ago
HDDs use much simpler electronics than SSDs. The controller in a hard drive mostly just moves the read/write head and spins the motor. It doesn’t need to do much processing. These chips are built on older manufacturing processes that are cheaper and less energy intensive. SSDs though need a fast processor to manage the flash memory for wear leveling, error correction, and keeping track of where everything is written etc. This requires more advanced chips, built on newer process nodes, which take a lot more energy and resources to make. And SSDs also need extra chips like DRAM and obviously the flash memory itself.
- whatevaa 1y ago
  DRAM is optional on NVME SSD's which can use host memory instead. DRAM-less SATA SSD's sucked.
- kvemkon 1y ago
  HDD controller calculates and checks ECC either and en/decodes the user's 0/1-bits to the 0/1-bits actually to be written on the platter but at much smaller speed (0.3 GB/s vs 14 GB/s SSD max). HDD has an extra servo controller. HDD has an extra 512 MB - 1 GB DRAM. WD HDDs 20 GB+ have some FLASH inside for metadata offload.
- dezgeg 1y ago
  Is the controller really going to be that much simpler on a HDD? On HDD you still have things like command queuing, caching, checksumming and bad block remapping just as with SSD. Sure you don't have the flash translation layer, but I'd expect processing of the analog signal going to/from the heads to be a processing headache too. I wouldn't be surprised if they have to do temperature compensation and factory and/or runtime calibration of the analog path. Of course much of that will be done in fixed-function custom hardware blocks, but almost certainly so would a SSD for eg. ECC calculations. https://spritesmods.com/?art=hddhack&page=3 https://spritesmods.com/?art=hddhack&page=3 has some data points on a 10+ year old HDD - 3 ARM9 feroceon cores + Cortex-M3 core. Doesn't sound too simple.
PaulKeeble 1y ago
A HDD has 1 controller chip and that controller is relatively simple compared to the controller chip on an SSD, its certainly a lot smaller and on a less advanced process because it has to deal with ~200MB/s not 15000MB/s. On top of the controller chip a 2280 NVMe SSD will have 4 or 8 memory chips as well, which are on a recent process and have many many layers stacked together. Then the SSD will also often have a DRAM chip as well. An SSD uses substantially more silicon than a HDD does.
- reginald78 1y ago
  Not disputing your broader point necessarily, but don't hard drives also include memory for cache while dram cache has become less and less common on SSDs? (to point where it is now uncommon on new SSD devices)
  - PaulKeeble 1y ago
    Yes they do. A consumer HDD from Seagate seems to have about 512MB whereas an SSD from Samsung seems to use 2GB.

jillesvangurp 1y ago

Not all energy is carbon intensive. Using a lot of power is fine as long as you get the power in a sustainable way. That isn't necessarily true for a lot of current production. But that's changing rapidly. Especially in the parts of the world where this stuff is produced.

eru 1y ago
If you are part of a large grid, power is fairly fungible (within that grid).
- rob_c 1y ago
  Nope. Again look at Spain, not all power sources are equal and just because it's been connected to a network doesn't magically mean all of the load is then spread between all sinks. If your high school science teacher told you so, they were wrong. It's time to talk about proper grown up electronics in this discussion.
  - eru 1y ago
    I was including the weasel world 'fairly' in front of 'fungible' exactly because I foresaw such a discussion. To be slightly more precise and wordy in what I wanted to express: The original comment said: > Not all energy is carbon intensive. Using a lot of power is fine as long as you get the power in a sustainable way. And that's true. You can buy 'green electricity' from the grid. But that mostly just means that the people who don't care get allocated a larger fraction of 'non-green' electricity. (That works, until you lose enough of that buffer of people who don't care where they electricity is coming from, that you have more demand for green electricity than is available on the grid. Then you actually need to spin up more green electricity or raise prices for that 'colour'.) Yes, there's different demand levels over time (throughout the day, and throughout the year etc), and different demanders need different reliability levels. And all the power sources have different profiles for when they are available, and how easy (or hard or impossible) it is to turn them on or off on short notice. > If your high school science teacher told you so, they were wrong. It's time to talk about proper grown up electronics in this discussion. Haha, right.

estebank 1y ago

I think the interaction of "thing is cheap" and "thing is tiny" break all of our heuristics for "thing is difficult and energy intensive to produce".

PaulKeeble 1y ago

The thing is that anything electrical energy intense is going to become less CO2 producing every year as energy systems transition. Its the use of Iron and other necessary fuel usage that will become the CO2 intense items over the next 5 to 10 years. The energy usage wont be the issue and CO2e for production of any item is going to drop quite drastically.

im3w1l 1y ago
Iron and steel can be made without fossil fuels. It's just more expensive.

wtallis 1y ago

Is anyone using EUV for SSDs? I don't think it's economical for NAND manufacturing. I'm not sure if SSD controllers are using EUV yet; they usually aren't on leading-edge process nodes.