10 ms·
this is fun. it seems most of these crosswalks can be configured via app from https://polara.com/ https://polara.com/ . So either the authentication was leaked
by jimmydoe 2y ago
this is fun.
it seems most of these crosswalks can be configured via app from https://polara.com/ https://polara.com/ . So either the authentication was leaked or got physically flashed/hacked?
- systemswizard 2y agoProbably factory defaults exposed to the world
- SoftTalker 2y agoOr a mischievous or disgruntled employee did it, or gave the password to someone.
- tinix 2y agoThe manual says the default password is 1234
- temp0826 2y agoI've got the same combination on my luggage!!
- thenthenthen 2y agoA few years ago all 4 digit passwords got leaked, better change it!
- janalsncm 2y ago> SIMPLE WIRELESS PROGRAMMING The iNX is easily programmed using our industry-leading Field Service App, available for iOS® & Android® – no expensive software or proprietary devices required! The app allows technicians to configure system settings and sounds, as well as access actionable data on button counts, flashing cycles, and more. Security not included!
- TheAceOfHearts 2y agoThe S in IoT stands for Security.
- mathattack 2y agoI thought it stood for a shorter word. https://www.reddit.com/r/theinternetofshit/ https://www.reddit.com/r/theinternetofshit/
- jen729w 2y agoAt work we used to say that “security puts the ‘no’ in ‘innovation’”. H/t Baggott if he’s reading. ;-)
- chairmansteve 2y agoIt can be secure..... Or it can work. Not both
- rhdunn 2y agoChoose two from: security, accuracy, and speed.
- masfuerte 2y agoAnd what you actually get is the remaining one?
- catlikesshrimp 2y agoLowest price
- BHSPitMonkey 2y agoThey said "The app allows technicians to configure system settings and sounds"; They never said the app _doesn't_ allow _non-technicians_ to do the same. What's the big deal?
- JKCalhoun 2y agoHoping it comes to the Flipper Zero.
- Natsu 2y agoSomeone is either guessing the passwords, which may well be the same all over the city given the number of these devices out there, or cities could just be using the default password of 1234. Yes, really: https://www.polara.com/wp-content/uploads/2023/02/Polara-iN2-iCCU-C-Quick-Start-Guide.pdf https://www.polara.com/wp-content/uploads/2023/02/Polara-iN2... > PASSWORD ISSUES: The iCCU can be connected to thru Wi-Fi. The buttons can be connected to thru Bluetooth. A. Once Wi-Fi is turned on at the iCCU, the Wi-Fi password is DEFAULT1 (ALL CAPS). B. Following power up, each button will say “change password” every 30 seconds, until the default password is changed. There is one shared password for logging into an iCCU and all PBS connected to it. The factory default password is 1234. Using a Field Service app, use 1234 to log into the iCCU or any PBS the first time, and change the password. This changes the password for all PBS and the iCCU. See Section 5.2 in the Manual for details. C. If the password is unknown, a Password Reset requires a call to Polara Tech Support.