3 ms·
Pinball games usually have two tilt mechanisms: (1) to prevent you from moving the playfield as a whole, and (2) to prevent you from smashing the coin mechani
by PaulHoule 2y ago
Pinball games usually have two tilt mechanisms: (1) to prevent you from moving the playfield as a whole, and (2) to prevent you from smashing the coin mechanism in front of the cabinet because otherwise you could get free plays by smashing the coin mech.
Coin-op video games have (2) because they use the same coin mechanisms as pinball games and have the same vulnerability.
I used to play pinball seriously [1][2] and frequently found machines where the type 1 tilt was insensitive or not working at all, whereas I never found a machine where the type 2 tilt didn't work. The type 2 tilt still gives you trouble when using certain tactics to rescue the ball from the drain, such as giving a hard impact to the left or right front of the table, though pulling the table quickly a few inches forward works on a machine with a dead type 1 tilt.
[1] get a score two orders of magnitude higher than most people would think possible, leave 30 credits on the machine
[2] get threatened that they'd kick me out of the game room as an undergraduate at a state school, never get bothered as a grad student at an Ivy League school
- joezydeco 2y agoThe "plumb-bob" tilt for [1] is dependent on a conical weight hanging on a rod, surrounded by a brass ring. Raising the weight higher or lower makes the tilt more or less sensitive by changing the distance between the cone and ring. Many operators adjust this and fail to fasten it tightly enough and the cone falls into the cabinet. The "slam tilt" switch for [2] is a leaf switch with a small intertial counterweight on one of the leafs and rarely falls apart. Funny enough, modern slot machines still call a tamper or intrusion event a "tilt".