2 ms·
> The correct solution would be for the GPU to not tie together the incoming individual 12VHPWR pins on a single plane right at the connector input but to use M
by Dylan16807 2y ago
> The correct solution would be for the GPU to not tie together the incoming individual 12VHPWR pins on a single plane right at the connector input but to use MOSFETs and current/voltage sense to detect stuff like different current availability (at least it used to be the case with older GPUs that there were multiple ways to supply them with power and only, say, one of two connectors on the GPU being used) or overcurrents due to something going bad. But that adds complexity and, at least for the overcurrent protection, yet another microcontroller plus one ADC for each incoming power pin.
> Alternatively each 12VHPWR pair could get its own (!) DC-DC converter down to 1V2 or whatever the GPU chip actually needs, but again that also needs a bunch of associated circuitry.
So as you say, monitoring multiple inputs happened on the older xx90s, and most cards still do it. It's not hard.
Multiple DC-DC converters is something every GPU has. That's the only way to get enough current. So all you have to do is connect them to specific pins.
- mschuster91 2y ago> It's not hard It still is because in the end you're dealing with dozens of amps on the "high" voltage side and hundreds of amps on the "low" (GPU chip) voltage side. The slightest fuck-up can and will have disastrous consequences. GPUs these days are on the edge of physics when it comes to supplying them with power.
- Dylan16807 2y agoLet me rephrase. Doing the power conversion is hard. Realizing that you already have several DC converters sharing the load, and deciding to power specific converters with specific pins, is comparatively easy. And the 3090 did it.