3 ms·
I'm surprised there's no initiative around reducing blinds spots caused by A pillars. I try to be a carefully driver, but I am still caught off guard by pedestr
by xnx 2y ago
I'm surprised there's no initiative around reducing blinds spots caused by A pillars. I try to be a carefully driver, but I am still caught off guard by pedestrians, cyclists, or entire vehicles hidden behind the a pillar.
- sickofparadox 2y agoA-pillars have been made thicker by law because every car now needs to be able to maintain cab integrity if it flips. https://www.nhtsa.gov/document/final-rule-federal-motor-vehicle-safety-standards-roof-crush-resistance-phase-reporting-0 https://www.nhtsa.gov/document/final-rule-federal-motor-vehi...
- FireBeyond 2y agoChicken and egg. A-pillars are bigger, yes. But they have to be even bigger still when you have trucks weighing in at 6,000lb+, and have taller cabs (which also makes them more prone to rollover).
- abfan1127 2y agothose A pillar blind spots are a result of roll over requirements. A pillars used to be very small.
- selectodude 2y agoDoesn’t help that cars weigh several tons now.
- MBCook 2y agoHeavier car = bigger pillars, yep. Add in higher window lines (due to raised SUV hoods, I imagine) and it’s so much harder to see out modern cars.
- ak217 2y agoI think it's a combination of that and curtain air bags which are often packaged on the pillars. And of course the rollover requirements are predominantly due to SUVs and trucks being so high off the ground (needlessly most of the time) they are more susceptible to rollover. Minimal visibility requirements around A pillars (and in front of the car/over the hood) sound like the logical next step.
- xnx 2y agoAerodynamics is also a factor. Windows used to be less sloped and more vertical.
- toss1 2y ago>>high off the ground (needlessly most of the time) they are more susceptible to rollover. Also the far greater mass of the vehicle requires far stronger A-, B- and C-pillars to not crush in a rollover Forcing all vehicles onto a 30-50% weight loss diet would help every factor tremendously, including reduced braking distances and more nimble turning to reduce collisions in the first place, reduced impact when there are collisions, reduced road wear, reduced fuel/energy consumption, etc.. Everything gets better with lighter weight, but engineers/designers seem happy to blow right past any weight budget at the slightest excuse (if there even is a weight budget in the design brief). The sheer mass of vehicles these days, even so-called "sportscars" never ceases to amaze me, and when it gets to SUVs and trucks, it's just insane. The technology certainly exists to cut weights by close to half, to levels of 35 years ago, and improve safety and performance while doing so.
- xnx 2y agoThis is one of those unintended consequences where things be came safer for passengers, but more dangerous for those outside the vehicle.
- loeg 2y agoIt's a result of roll over requirements in tandem with a complete lack of requirement around A-pillar visibility, yeah. It's not like a hard limit of materials science that A-pillars have to have poor visibility to be rollover safe.
- colechristensen 2y agoThey're there in the first place for the safety of people in the vehicle in crashes. Competing requirements...
- tzs 2y agoI've driven the same car since 2006 (a Honda CR-V) so don't have any experience with later cars to compare to. Does anyone happen to know current A pillars compare to mine? I've done some tests with mine and it doesn't look like they would be able to block me from seeing any pedestrian that is near enough that I might hit them. The driver's side one is wide enough that its angular width might be wider than the angular width of a nearby pedestrian, but the pillar is not vertical and so only overlaps a horizontal slice of the pedestrian someone in their midsection. The parts above and below that are easily visible.