6 ms·
So the "power distribution network" bit is a big pile of standard components? Is this what you get if you show up with a big pile of verilog and say "print this
by RantyDave 2y ago
So the "power distribution network" bit is a big pile of standard components? Is this what you get if you show up with a big pile of verilog and say "print this"? Why do the other bits looks different?
- dragontamer 2y agoPDN includes the PCB itself. You need to think about the return currents closely matching. In many cases on 4 layer boards, you are required to have two Vias per... Via. (One for the forward current and a second for the reverse current). The PCB also serves as the fastest capacitor. The PCB layers itself form a capacitor measured in hundreds of Picofarads in most cases but more importantly, almost no parasitic inductance or resistance. In many cases, boards are simulated at the Maxwell equation level to understand crosstalk issues. It seems like RP2350 is just fast enough where these effects could be noticed (at the highest clock rate)
- lambda 2y agoBecause that portion is digital. Digital is fairly immune to noise, but it can produce a lot of noise. The power distribution network can carry that noise to other components that it passes over, but because that section is all digital, it's ok, it's reasonably tolerant if it. The other portions that are uncovered have more sensitive analog circuits. You need to be more careful of how you route power, to avoid noise, so you don't cover it all in a big network on the top metal layer, but instead it's routed more selectively.