3 ms·
This is a very confusing article. Surely it's the beacons that transmit beacons, not phones? And what is the signature based on? What is the fix? Terrible repor
by IshKebab 2y ago
This is a very confusing article. Surely it's the beacons that transmit beacons, not phones? And what is the signature based on? What is the fix? Terrible reporting.
In any case I doubt this has much practical impact given you presumably need an SDR to do this tracking.
- 0xDEADFED5 2y agoit all makes sense if you read the paper linked at the top of the article.
- arlort 2y agoI think they might be referring to ble advertisement packets
- jbgreer 2y agoI’m with you: I read the link and think they are referring to BLE advertisements. The frequency of such advertisements is configurable. AIR, the advertisement interval has to be a multiple of 0.625msec. Per the spec, a random delay of 0-10msec is added in between the interval to aid in collision prevention. I’ve mainly seen “BLE beacon” used to refer to types of devices, especially ones that primarily advertise. There are some devices, like BLE-based remote controls, that advertise very frequently, I assume to reduce latency between a user’s action and response by the receiving device. It makes for a very noisy environment if you’re playing at home and not filtering based on MAC, etc.
- Reventlov 2y agoPhones can also transmit beacons. The same as laptops, actually, some of them constantly broadcast BLE beacons. The signature is based on physical layer characteristics, according to the linked paper : « They result in two measurable metrics in BLE and WiFi transmissions: Carrier Frequency Offset (CFO) and I/Q imperfections, specifically: I/Q offset and I/Q imbalance. ». Yes, you would probably need SDR to do this tracking, but SDR are generally not this expensive.
- codetrotter 2y agoFrom the article: > Mobile devices, including phones, smartwatches and fitness trackers, constantly transmit signals, known as Bluetooth beacons, at the rate of roughly 500 beacons per minute. These beacons enable features like Apple’s “Find My”--a tracking service to find a lost device as well as COVID-19 tracing apps; and connect smartphones to other devices such as wireless earphones. > The current approach taken by smartphone companies to make the devices hard to track by their Bluetooth signals is to randomly change the phone’s identity, its MAC address. However, that doesn’t address the physical-layer fingerprints inherent in each device’s transmissions due to unique hardware imperfections. > All wireless devices have small manufacturing imperfections in the hardware used to emit these beacons that are unique to each device. These fingerprints are an accidental byproduct of the manufacturing process. These imperfections in Bluetooth hardware result in unique distortions, which can be used as a fingerprint to track a specific device.
- IshKebab 2y agoYes I read the article. This doesn't answer the questions in my comment.
- Brian_K_White 2y agoWhat is missing? For example, your first question exposed that you had a misconception of what "beacon" means, and the first sentence of these excerpts is exactly an utter layperson definition of what "beacon" actually means. I don't know how you can say "I read the article" and then read these bits yet a 2nd time, and still claim to have those questions.
- surajrmal 2y agoIt's a press release, not a white paper. Phones do transmit beacons.
- JohnFen 2y ago> given you presumably need an SDR to do this tracking. SDRs and the software to make good use of them are cheap and readily available. Using them is well within the ability of almost everybody. All you need is the desire.