3 ms·
The first two pictures on that page show 4 RAM chips on each side of the board. https://media-www.micron.com/-/media/client/global/documents/products/technical
by Dylan16807 3y ago
The first two pictures on that page show 4 RAM chips on each side of the board.
https://media-www.micron.com/-/media/client/global/documents/products/technical-note/dram/tn-ed-04_gddr6_design_guide.pdf https://media-www.micron.com/-/media/client/global/documents...
This document directly talks about splitting a 32 data bit connection across two GDDR6 chips, on page 7.
"Allows for a doubling of density. Two 8Gb devices appear to the controller as a single,
logical 16Gb device with two 16-bite wide channels."
Do that with 16Gb chips and you match the GPUs we're talking about.
- nsteel 3y agoOf course - clamshell mode! They don't connect half the data bus from each chip. Also explains how they fit it on the card so easily without (and cheeply).
- Dylan16807 3y agoYeah, though a way to connect fewer data pins to each chip doesn't particularly have to be clamshell, it just requires a little bit of flexibility in the design.