4 ms·
Inside the miracle of modern chip manufacturing
- qwertox 3y agoI wish there would be a flattened alternative in order to read the text without distractions.
- deleted 3y ago[deleted]
- demondemidi 3y agoIt's called "a book". ;-)
- jkic47 3y agoI still remember a time when radios occupied almost a whole table, and the magic of portable "transistor radios". we used to smuggle them into class to listen to the broadcast of cricket matchew. The teacher would pretend not to know we were listening to it, but when a wicket fell, so did the facade, and he'd ask what the score was. we would tell him, the whole class unified in a conspiratorial code of silence
- barelyauser 3y agoI suppose the '47' in your username tells the same story as the Kalashnikov one does?
- jkic47 3y agosorry, I am not familiar with the Kalashnikov story, so it would be an incredible coincidence if it did!
- yetihehe 3y agoWhen viewed from distance, progress we had in last 100 years is just magical, and sometimes there are local pockets of old technology. My father told me story about how he learned electronics from an old book where they started with a "crystal radio" from scratch (like finding a conducting region in some mica crystal) and he tried to buy some old diodes in local electronics shop and they were already obsolete and they had much better diodes already on stock. When I started, I had to buy some discrete transistors and amazed him with minimal quantity order of 20pcs, and I bought 100 just because it was still pennies. Recently I was amazed by ssd's being so cheap. We have A LOT of progress, but we have literal explosions of progress in adjacent areas that diminish that little slower progress, so people say "oh, yeah, the progress times are behind us now".
- jyunwai 3y agoWould anyone know the general steps to making an interactive webpage like this? I tried to take a peek by opening the Web Inspector and scrolling to see what changed, but couldn't uncover anything definitive. The general technique I can identify is that the webpage uses an approach called "scrollytelling" (also noted by the references to "scrolly" from the Web Inspector) to make the animation advance in reaction to the user scrolling down. For the pictured objects, I assume that an animation team (likely a bit separate from the web development team) created the assets. But I wonder how the developers then made sure that each provided asset enlarged at the proper rate as the user scrolled down (and also made sure that the scaling worked properly upon changing the width of the window).
- thorncorona 3y agohttps://pudding.cool/process/how-to-implement-scrollytelling/ https://pudding.cool/process/how-to-implement-scrollytelling...
- samlearner 3y agoWe're not scrubbing over a pre-rendered animation here. We're using a library called threejs (a WebGL wrapper) in the background figure and adjusting the camera/models in response to scroll position (within a react environment)
- jyunwai 3y agoThat is excellent, thanks for the information and work to produce a very nice feature.
- demondemidi 3y agoIronically even this article is a decade behind as it depicts planar CMOS transistors. Around 2010 the industry started moving to finfets which are gates surrounded on three sides by poly. Manufacturing those structures almost destroyed Intel as the first process had their worst yields in history. Source: former Intel process engineer that got out before p1274/1276 shat the bed.
- wtallis 3y agoFrom a customer perspective, though, Intel's first FinFET chips (22nm, Ivy Bridge) were at most a few months late, and price and performance were reasonable. The next node was a bit more late and definitely underwhelming at first, and the one after that was the real disaster.
- simpaticoder 3y agoI was curious that they claim that lithography is done with ultraviolet, and I looked up the wavelengths involved. Sure enough, "typical" UV is still hundreds of nanometers long, like visible light. This would be too coarse for small features since you'd get diffraction at the edges of the stencil. I looked up UV in wikipedia and apparently they have defined "extreme UV" to be down to 10nm - which I would have called X-rays. Indeed, if 10nm is extreme UV, perhaps we can also call 10nm light "underachieving X-rays". https://en.wikipedia.org/wiki/Ultraviolet https://en.wikipedia.org/wiki/Ultraviolet
- whatshisface 3y agoWell, I would have called infrared microwaves because the wavelengths are in micrometers, but I believe that ship sailed over a century ago. (P.S. they're using them to cause chemical reactions, not ionize atoms or scatter off electrons, which is definitely more of a UV thing than an X-ray thing.)
- marcosdumay 3y ago> they're using them to cause chemical reactions, not ionize atoms or scatter off electrons Those three are approximately the same thing. The distinguishing characteristic of X-rays is that they remove electrons from other layers than the last one. And the most relevant feature of UV is that it ionizes atoms. (Even though what distinguishes it is that we can't see it.) For completeness, the thing that differentiates IR from microwaves is that IR creates molecular compression while microwaves can only make matter vibrate. The IR name is about 3 centuries old, and it's because it often comes from light sources. While microwaves are the smaller version of the short waves; from the short, medium, and long waves used on radio. Anyway, the dividing between those is always fuzzy.
- starspangled 3y ago> I was curious that they claim that lithography is done with ultraviolet, and I looked up the wavelengths involved. Sure enough, "typical" UV is still hundreds of nanometers long, like visible light. This would be too coarse for small features since you'd get diffraction at the edges of the stencil. 173nm DUV is used commercially to create features in the 20-30nm range, possibly smaller. > I looked up UV in wikipedia and apparently they have defined "extreme UV" to be down to 10nm - which I would have called X-rays. Indeed, if 10nm is extreme UV, perhaps we can term 100nm light "underachieving X-rays". What are you are trying to say? EUV light used in lithography (13.5nm) is close to soft x-ray light, but what does 100nm light have to do with it?
- mecHacker 3y agoGood storytelling, but lacking editorially - they left out an important category of chip designers / manufactures and missed out on perspectives from companies that design chips as part of their products but not as end products. Leading to flawed assertions that (all) engineers are moving away from System on a Chip(SoC) architecture to chiplet architecture & multi-chip modules (MCMs) technology! From the likes of intel, it makes sense to modularize their product and maximize market outreach by offering variants. But this would almost always be subpar efficient on power and performance parameters to SoC designed for custom use-cases!