3 ms·
> I like the enthusiasm, but you REALLY shouldn't be DIYing this. Of course you should be, this is hacker news after all. But this guy shouldn't be because his
by jacquesm 3y ago
> I like the enthusiasm, but you REALLY shouldn't be DIYing this.
Of course you should be, this is hacker news after all. But this guy shouldn't be because his soldering skills are atrocious.
At least he put a big fat warning on the article. I've built a 15 KW solar installation here and it's safer and better constructed than what your typical professional around here delivers. DIY electronics and working with mains are perfectly ok. I've been doing so since I was 12 or so and I really don't get this kind of alarmist attitude towards electricity, it isn't magic.
- GeoAtreides 3y agoBut how would you know if your work is better (and safer) than what a professional delivers? The professionals, in theory, have more experience and more knowledge in depth than an amateur; and if an amateur has greater knowledge than a professional, is he really an amateur still? Of course, some things might be obvious to an amateur or a lay person (walls not straight, for example), while others might be more subtle and deadly at the same time (foundation issues). > DIY electronics and working with mains are perfectly ok That's great to hear! Now let me connect this beefy microwave oven transformer to the mains and do some electrical wood burning, surely it will perfectly ok
- jacquesm 3y ago> But how would you know if your work is better (and safer) than what a professional delivers? Common sense? > The professionals, in theory, have more experience and more knowledge in depth than an amateur; and if an amateur has greater knowledge than a professional, is he really an amateur still? An amateur is someone who doesn't do what he does professionally, a professional is someone who makes a living with the thing they do. That doesn't say anything about their knowledge level. But when you're a professional and you claim that you are 'done' with the installation and I spot: a HV DC wire pinched between a panel and the mounting rail, a HV DC wire (the + terminal) run through the cooling ribs of the inverter (sharp af near the ends) and a mains cable whose connectors aren't torqued down to the point that I smell ozone then you have to wonder. Note that there is a distinguishing factor with solar installers: they are not afraid of heights. Electrical knowledge is apparently secondary. > Of course, some things might be obvious to an amateur or a lay person (walls not straight, for example), while others might be more subtle and deadly at the same time (foundation issues). The above are a mix between obvious and non-obvious but those guys probably did 400 installations last year and if my n=1 sample is any indication then I wouldn't be surprised if they left some latent problems behind them. > Now let me connect this beefy microwave oven transformer to the mains and do some electrical wood burning, surely it will perfectly ok If you insist on being stupid then I don't think that's a fair way of conversing here. You can use common sense, read the electrical code (though it's an expensive book, which is kind of weird, you'd expect it to be free) and you can get yourself some basic knowledge about electricity and electronics all the while doing nothing more 'scary' than using batteries or sitting on the far side of an insulation transformer. If and when you feel ready for it you can switch to mains powered stuff. The scariest stuff to work on: old fashioned tube based color TVs but I haven't seen any of those in a couple of decades. Other than that, I would be very careful with a microwave because it is probably easy to create a radiation leak and I don't have the proper gear to detect one. So I'd stay away from that. Again: common sense.
- GeoAtreides 3y agoThe point is that what's common sense to an engineer is different than what's common sense for a lay person or an amateur. Their way of thinking is different. A lay person is not aware, doesn't know and can't mentally model the kind of power a microwave transformer can deliver: it's almost (almost!) an out of context problem for them. They just saw the pretty fractal wood burnings on tiktok and want to try themselves. And then they die[1] That's the point of all the scary warnings, caveats and reminders. They're there for not-engineer-minded folks, so that they don't hurt themselves or set their house on fire. [1] https://en.wikipedia.org/wiki/Fractal_burning#Safety https://en.wikipedia.org/wiki/Fractal_burning#Safety
- crote 3y ago> Common sense? Unfortunately common sense isn't as common as you'd hope, and there are plenty of things which are "common sense" among amateurs which are simply untrue. > An amateur is someone who doesn't do what he does professionally, a professional is someone who makes a living with the thing they do. That doesn't say anything about their knowledge level. Professionals usually also have formal training, which means they are at least somewhat familiar with the theory behind what they are doing. PV installation is indeed a well-known cowboy industry right now, but I can assure you that an actual electrical engineer will be way more capable than a random hobbyist when it comes to actually designing electronics. Your one experience with a single PV installer does not scale to the entire industry of electronics.
- kwhitefoot 3y ago> an actual electrical engineer An actual electrical engineer is unlikely to have the necessary certification to do electrical installation work for someone else. What you want is an electrician.
- sokoloff 3y ago> I can assure you that an actual electrical engineer will be way more capable than a random hobbyist when it comes to actually designing electronics. A randomly chosen EE better than a randomly chosen hobbyist? Sure. A randomly chosen EE better than all hobbyists who’d be inclined to take on such a project? I seriously doubt it.
- ThrowawayTestr 3y agoJust because you don't trust yourself with mains power doesn't mean every hobbyist will burn their house down.
- crote 3y agoA hobbyist can definitely do the proper research and build perfectly safe high-voltage / high-current installations, no doubt about that. Electricity is indeed not magic. The key part here is knowing what you are capable of, and more precisely knowing where your limits are. However, it is quite obvious that this person has not done the proper research, and their work is held together mostly by hopes and prayers. The problem is that random people on the internet see "guides" like these and treat them like an Arduino project: just something to mindlessly copy in a spare Saturday afternoon, and the worst that can happen is that it won't work. They will not do the research, and they will not take adequate safety precautions - they never had to do so before and they never had any issues, what's the big deal? That's fine with most DIY projects. Heck, it's even fine with most DIY projects involving mains voltage - a guide for installing an outlet will always tell you to turn off the breaker first, at which point it really isn't all that dangerous. You're just plugging some pre-made and known-to-be-safe parts together, it's less complicated than building a computer. You have to actively try to screw that up. This is a different beast. You're building a new thing which is handling mains voltage out of the cheapest parts you can find. You can totally do an Arduino-like project with that mentality - the average Arduino project going horribly wrong will result in a brief spark and some nasty smoke coming out, it's no big deal. But a project like this going wrong? It will set your house on fire.
- jacquesm 3y agoMostly agreed but: > But a project like this going wrong? It will set your house on fire. No, the most likely outcome is that it will either cause a breaker to trip or that it will simply stop working. 'it will set your house on fire' is only one of the three possible outcomes and the least likely one. It can happen though and that's why this guy should be doing his stuff for himself rather than broadcasting it to the world because the final product isn't 'good enough'. Apropos Sonoff, the brand you advertise in your original comment: they had a pretty serious issue at some point where they had a fuse in a holder inside the devices that got excessively hot because it wasn't rated for the current of the socket. And that is a fire risk. https://www.reddit.com/r/homeautomation/comments/as26oj/sonoff_fire_hazard/ https://www.reddit.com/r/homeautomation/comments/as26oj/sono...
- atoav 3y agoAs a certified EE I totally support your warning. The problem with mains voltage hobbyism is that it is really easy to build something that works fine in 99% of the situations until it encounters those 1% situations that the hobbyist couldn't plan for, doesn't have the knowledge of, doesn't has the tools for etc. The problem with that is, that if you're unlucky it can literally ruin multiple lifes at once. Experimenting is one thing (know the risks and go ahead), but putting things out there in circulation is an entirely different can of worms. I had to learn all of the VdE rules and many of them have been written in catastrophic failures and house fires. And I thought I knew a lot when I started learning those rules, and oh boy was I wrong. All electrical appliances interact with your house wiring, and there can be very weird fault conditions between your appliance and your house wiring, that are very hard to predict (and even harder to test for) by a "electricity comes out of the wall"-hobbyist.