3 ms·
That needs a two stage converter down to chip voltages, doesn't it? It's a reduction in cables, but I wouldn't say drastic. An 8-pin with good components can
by Dylan16807 3y ago
That needs a two stage converter down to chip voltages, doesn't it?
It's a reduction in cables, but I wouldn't say drastic. An 8-pin with good components can handle over 500 watts at 12 volts. Just modernizing gives you most of the possible benefit.
- lazide 3y agoEh, 500 watts at 12 volts is 42 amps. Assuming half of those 8 pins are positive, the other negative thats 10 amps per pin. You’d better not have any corrosion in that connector, or a loose wire if you want to be able to do that without fire risk. And you’ll get non-trivial resistive heating in many cases over time. Doing the same at 48 volts is 10.5 amps total, 2.6 amps per pin. Hard to mess that up.
- Dylan16807 3y agoThey are big pins. They can handle it. I mean, the much smaller pins on the 12-pin got rated for 8.3 amps. And yes that connector does have issues, but they're around bad latching much more than current.