5 ms·
Inverted perovskite solar cell breaks 25% efficiency record
- Sparkyte 3y agoThe problem with a perovskite solar cell is the fragility and life span of the solar cell. If they can stablize the material to last 20+ years it would be entirely worth the cost and development of the solar cells. But right now it is expensive. They last about 5 years if you're lucky. Although there has been improvements since I last ready, but grain of salt.
- ranguna 3y agoI'm fine if they last 5 years, as long as they are a quarter of the price of the ones that last 20, are easily recyclable and have minimal rare earth materials.
- jacquesm 3y agoNote that at this point in time it is economics, not yield-per-area that dominate any solar cell installation so a new cell doesn't necessarily have to be high yield, it has to be better when you compute total power generated for a given $ invested over the lifetime of the cell. That's pretty much all that matters, everything is just a distraction unless you are severely space constrained a couple of percent more or less isn't going to make a huge difference, and cost savings on existing processes have now compounded to the point that people are more and more looking at the price of inverters and installation as important factors. That's also why you see the push for transformerless inverters (those are bulky and costly so they affect both inverter cost and installation/shipping). I did a pretty big solar installation over the last two years and I decided to go for quality panels because the glass-glass sandwich panels have a much better economic picture than the glass-plastic ones even though they are more expensive up front.
- deleted 3y ago[deleted]
- deleted 3y ago[deleted]
- robmsmt 3y agocan you elaborate a bit more on your setup?
- jacquesm 3y ago6 strings of cells, hooked up to two inverters, one handling two banks on a very high roof, peak production there is 4KW, one inverter handling four strings on covered outdoors space and the garage. The last four are at very shallow angles, so less than ideal but total surface area really makes up for that. We draw about 300W on average and the peak production capacity for the whole setup is close to 15KW (or even slightly higher in full sun in March). Over the last 11 months the system produced 12 MWh on about 4 MHw consumption so net 8 MWh returned to the grid. 34 of the panels are brand new 370W glass-glass panels, the remaining 16 are much older (probably a decade old, maybe more) that still work pretty well rated at 265 W each (but probably closer to about 220 or so).
- chrisweekly 3y agoWhat's your geography, and what'd it cost up front?
- jacquesm 3y agoNetherlands. Panels cost about 210/each for the new ones and the old ones were pretty much free. Inverter: the one upstairs is a new one, 500 Euros ('second chance'), three phase 4KW, the one downstairs is a monster, it's 17KW with up to six strings and cost another 500. The panels on the high roof were installed, about 1000 to do the job and the rest I did myself, add another 500 or so in cables, tubing etc. The power bill went from 8500 / year to 3500 / year, and all of that is the remaining gas usage. We're looking into using any surplus in nov/dec/jan/feb to help heat the house to further offset the gas usage but the economics aren't really there yet as far as I can see. And even in November we are still offsetting about 75% of our electricity usage, which somewhat surprises me, I'd expected far worse.
- passwordoops 3y agoI was interested until I saw the .edu url. Just another regularly scheduled biweekly battery/renewable/cleantech PR
- bobmaxup 3y agohttps://www.science.org/doi/full/10.1126/science.adk1633 https://www.science.org/doi/full/10.1126/science.adk1633
- passwordoops 3y agoThanks for the full link, but kind of proves the point. We're just months removed from Science publishing room temp superconductivity... One paper tells other researchers to check it out. Doesn't mean it's: - reproducible - scalable - functional in the real world
- bawolff 3y agoThat's an unreasonable standard. Things can be interesting without them being a full-blown rolled out product.
- passwordoops 3y agoThen I'm afraid you don't understand how science works
- system2 3y agoI will believe it when I see it being sold on Amazon and AliExpress. It won't matter if they did 99% efficiency if it never reaches the consumers.
- Tempest1981 3y agoSome people are here for the science, others for the business angle.
- matthewdgreen 3y agoThis isn’t cold fusion or superconductivity. If you’re interested in knowing the state of the commercial solar industry 5-10 years in the future, these articles are extremely useful. If all you want to do is slap down a credit card you don’t need to read HN.
- boulos 3y agoAs folks are saying, there are already commercially developed panels at 24.7% [1] that should ship within the next year. The existing fleet of Maxeon 3 are apparently going to be 24% this quarter, rather than the 22.7% in the actively shipping parts [2]. Like cache miss ratios, it's hard to remember that 25% is a 10% improvement in efficiency over that 22.7% (and 4% over the 24% claim). But as jacquesm mentions, what matters for system design is either $/watt (installed!), total generation, or whatever other metric. Efficiency might get you more panels on a roof, but so could different panel sizing! One more panel because the sizing works out could easily be 5%. tl;dr: it's interesting research, but shouldn't affect purchasing decisions. [1] https://mediaroom.maxeon.com/2023-06-01-Maxeon-Solar-Technologies-Extends-Solar-Panel-Technology-Leadership-Position https://mediaroom.maxeon.com/2023-06-01-Maxeon-Solar-Technol... [2] https://maxeon.com/us/sites/default/files/2023-05/sp_mst_112c_max3_wht_ac_ready_ds_en_ltr_545907.pdf https://maxeon.com/us/sites/default/files/2023-05/sp_mst_112...
- tester756 3y agoDid perovskites managed to solve the problem with usage of lead?
- AtlasBarfed 3y agoAny perovskite article is utterly worthless without some discussion of lifetime/endurance in the wild.