3 ms·
> the 4-bit-5-bit (4B5B) encoding of 100BASE-TX (Fast Ethernet), which encodes 4 bits of data in 5 bits, which would normally require 125 MHz of bandwidth to tr
by Dylan16807 3y ago
> the 4-bit-5-bit (4B5B) encoding of 100BASE-TX (Fast Ethernet), which encodes 4 bits of data in 5 bits, which would normally require 125 MHz of bandwidth to transfer,
I object to this number. I would say that "normal" here should mean plain old one bit at a time, 125 million times per second. This would make the maximum frequency 62.5Mhz, when it transmits 101010, or more specifically alternating between positive and negative voltage.
10Mbit Ethernet requires 10MHz specifically because it doesn't do the simplest thing. It transmits 20 million times per second.
> but the final encoding step of 100BASE-TX is MLT-3 (Multi-Level Transmit), which as the name suggests cycles between three voltage levels (+1, 0, -1 V). Due to the use of MLT-3, to reach the effective data rate of 100 Mbit/s only a bandwidth of 31.25 MHz is required rather than 125 MHz.
I would clarify that MLT-3 has four steps in the cycle. +1v, 0v, -1v, 0v again. So that way it cuts 62.5 in half to 31.25.
> can technically use 100 MHz Cat-5e wiring courtesy of its 100 MHz bandwidth requirement, this assumes flawless wiring
It assumes flawless wiring if you go for maximum distance, which is not particularly common.