3 ms·
It's almost as if the designers have considered this potential failure mode for devices that often get dropped even while plugged into a charger :) I can empha
by lxgr 3y ago
It's almost as if the designers have considered this potential failure mode for devices that often get dropped even while plugged into a charger :)
I can emphasize with many of the gripes people have with USB-C cables and supported modes being confusing, but the port is really, really well thought out: Make the cable the part that fails more easily [1]; make it so that the plug only minimally acts as a lever while partially or fully plugged in; cover the pins on the plug (because otherwise people will inevitably touch them, and these cables can carry up to 48 V of voltage).
[1] That part has actually worked well for everything but my Yubikey :( USB-A and an adapter it is for the next one.
- crote 3y agoA significant issue probably affecting your Yubikey is that there are very few male USB-C plugs available. The ones that do exist are mostly designed for USB-C cables, which uses a tiny 0.8mm thick "paddle card" fully embedded in the plastic cover. Alternatively, there are "brick nogging" connectors which stand up straight from the PCB and are therefore unusable for a Yubikey, or "sink board" ones which require a custom jig for assembly. Meanwhile with USB-A you don't even need a male connector at all - just have a bit of your PCB stuck out in a vaguely USB-A-looking shape and it'll work just fine.