5 ms·
Yeah my intel atom NUCs run at 5W idle and 10W load and they're a ton faster than a pi 4. Probably a pi 5 too. It's not very impressive. And that's with a real
by wkat4242 3y ago
Yeah my intel atom NUCs run at 5W idle and 10W load and they're a ton faster than a pi 4. Probably a pi 5 too. It's not very impressive.
And that's with a real SSD.
- peteforde 3y agoNUCs cost hundreds of dollars, though. And they are probably 8x bigger, if you start stacking Pis.
- martin_a 3y agoRasperry Pi board easily cost hundreds of dollars, too, once the scalpers have bought up the little stock that is there.
- nsteel 3y agoI've only ever paid RRP and I strongly suggest you do to. Better yet, there are plenty of Pi 4 to purchase these days.
- martin_a 3y agoyes, these days. let's have a look at the last three years and see how it was then...
- nsteel 3y agoWhy is that interesting? Are we expecting another global semiconductor supply chain problem?
- martin_a 3y agoBecause people who _needed_ to buy a Raspberry Pi simply weren't able to do so.
- nsteel 3y agoExactly the same as every other hardware supplier. For pi there was some kind of scheme for businesses who _actually_ needed the hardware in order to stay in business. No idea how that worked. Either way, this is all history. Raspberry Pi boards do not cost hundreds of dollars as claimed.
- peteforde 3y agopsst https://rpilocator.com/ https://rpilocator.com/
- martin_a 3y agonot much of use for the last three years.
- progbits 3y agoThis was used exactly for the last three years so you could get an alert when it became available. Before that there was no need for a locator, just buy from whatever eshop, everyone had it in stock and at MSRP.
- justin66 3y agoThat site is one reason why I was able to buy Pis at list price these last three years.
- peteforde 3y agoI am so grateful to the folks behind that site. It's the only reason I was able to track down units when I needed to buy them. you not checking the site != people not being able to buy them I'm not saying that it was easy, or anything like business as usual. They've done interviews where they talked about the difficult decision to prioritize companies that would go under without new stock over casual hobbyists. It's one of those unenviable situations where there's no good outcome, just a possibly less-bad one.
- d3w4s9 3y agoOnly if you are looking for a latest-gen or last gen machine. You can find some old NUCs for cheap, and there are lots of mini PCs or thin clients for around ~100. Yes about twice as expensive but more than twice as powerful (in both processor speed and features). Of course only if you plan to use it as a Linux computer, not for GPIO stuff.
- peteforde 3y agoThis isn't super-practical for a commercial application which requires 70 identical machines. Not only are they expensive and relatively large, machines that have had previous owners often have mystery issues which make them great for home tinkering projects, less so for something that can get you in trouble if it breaks down. There's a reason companies buy new parts instead of employing teams to scour Craigslist for deals.
- xienze 3y agoI hadn’t heard of these N100 systems before, but in a minute’s worth of searching I found this: https://www.amazon.com/Beelink-Intel-N100-Computer-Desktop-Display/dp/B0BVFS94J5 https://www.amazon.com/Beelink-Intel-N100-Computer-Desktop-D... Faster processor, 16GB RAM, 500GB NVME SSD, with case. $165! That’s damn impressive, considering the RPi5 with 8GB RAM is suggested to sell for $80 (good luck getting it for that little). And Amazon can get it to me in two days. Yeah it’s definitely bigger, but I wasn’t expecting these systems to be so cheap.
- dougmwne 3y agoThat’s not suppressing since the Pi is usually several process node generations behind.
- moffkalast 3y agoThe NUC's GPIO header: crickets
- trevvr 3y agoThere was at least one NUC with a full GPIO header set. The DE3815TYKHE. I've done motor control, I2C and sensor IO with it and it was rock solid on that little NUC. There was also the UP Board which was an Atom SOC with PI compatible GPIO. I believe that's still in production?!
- moffkalast 3y agoOh wow that's the first I'm seeing that, looks like it's still available though a bit pricey for over 1 GB of memory. https://up-shop.org/up-board-series.html https://up-shop.org/up-board-series.html Then again that is severely dated, the Atom was a very capable processor... when it launched, almost a decade ago.
- robotnikman 3y agoWow, I never knew they had x86 boards like this. The fact that its x86 is a huge deal itself in itself, due to more software/distro compatibility.
- nirav72 3y agoThat's a easy problem to solve - https://www.adafruit.com/product/2264 https://www.adafruit.com/product/2264 There are other cheaper boards for USB to GPIO out here as well.
- moffkalast 3y agoIt solves it, as much as adding a trailer to your sports car solves your problem of not having a pickup truck. It works, but it's very inconvenient. Eventually those boards run into limitations and then you have to just opt to go with serial to a microcontroller which misses the entire point of having a SBC.
- sunshine-o 3y agoYes, if I look at those new Intel N100 based mini PCs with a 15W TDP and their power / price / consumption ratio it would seems Intel took notice of the threat and reacted accordingly. Especially now that the RPI kind of need a fan and you need to buy the power supply, the storage and the case. Well the RPI has GPIO but for small home server use case nobody cares...
- nirav72 3y ago>Well the RPI has GPIO GPIO can be added via tons of USB to GPIO boards out there. But I agree - lot of people tend to buy the Raspberry Pis for home servers instead of just opting for used mini-PCs from secondary markets. Even a 7-8 year old Intel CPU in those mini PCs will vastly outperform a Raspberry pi. Even the Raspberry 5. Plus, better I/O options and storage with mini PC.
- monocasa 3y ago> GPIO can be added via tons of USB to GPIO boards out there. Depends on the use case. USB adds a few orders of magnitude more latency and jitter versus what's probably just APB.
- wkat4242 3y agoWhich only matters in very niche usecases though. Most of the stuff just flashes LEDs or reads a switch. Doesn't matter for that. And for more intelligent stuff there's i2c or api which have their own interface boards.
- KaiserPro 3y agoYeah, the intel n100 is absolutely fantastic. but even at bargain basement price its at least 2-4x the price: https://www.amazon.co.uk/TRIGKEY-Mini-PC-Desktop-Computer/dp/B0C5C1RLM9 https://www.amazon.co.uk/TRIGKEY-Mini-PC-Desktop-Computer/dp... I have the above, it's max powerdraw is <5 watts, even at 50% cpu its <3watts. That comes with ram, SSD, case and motherboard. so to get the pi5 to the same state would need an SD card (boo hiss poor speed.) From what I've seen the pi5 is 1/3rd faster than the intel j5005. (in pybench at least.) but comparing to a real intel NUC, of course its going to be faster, the NUC costs an entire order of magnitude more.
- keikobadthebad 3y agoThe SD is the worst for reliability, but if it's like rpi4, you can put UEFI on the SPI flash and come up on non-SD boot devices without SD now. But that's all kind of crazy when cheaper, faster SBCs commonly simply boot to reliable, on-board, eMMC.
- avidphantasm 3y agoYeah, still happy I went with the Odroid M1 for a small home media server. It’s not fast, but it does everything I need out of the box, has a very nice aluminum case, and doesn’t use much power.
- wkat4242 3y agoeMMC isn't that reliable. It's basically an SD card on a chip. Difference is they're more optimised for random writes than large files like most SD cards, but you can get such SD cards too ("High Endurance" models)
- keikobadthebad 3y agoWhen was the last time the eMMC on your phone failed? They are very reliable. I have had several SDs fail sooner or later since rpi1 though which is why I personally won't be using them any further.
- 3y ago