4 ms·

My play was always to build big cases with water-cooling + low speed fan radiator sandwich for near silence. Next gen play is to accomplish near silence in a m

My play was always to build big cases with water-cooling + low speed fan radiator sandwich for near silence. Next gen play is to accomplish near silence in a much form factor because super towers take a lot of space and moving them sucks.

codetrotter 3y ago
Tbh the three main things that suck about desktop computers for me are: - lots of cables everywhere - when you bring it with you on travels it feels like it’s gonna fall apart internally - external monitor is difficult to safely bring as well. (This one is a problem with the laptop as well because I still use an external monitor there.)
- nickstinemates 3y ago
  This is why I have always been a fan of my work flow being based around thin clients. You should be able to access your data, projects, anything from anywhere. Then the desktop vs. laptop is a matter of comfort/circumstance. My toolkit for this now involved tailscale for network, nfs/smb shares for data access, and vscode/neovim for programming. It's incredibly powerful
- neilv 3y ago
  > when you bring it with you on travels it feels like it’s gonna fall apart internally If I had a take a critical desktop-sized PC traveling, I'd consider building it in a rackmount 4U chassis, adding additional bracing (e.g., to keep big GPUs from wrenching on the PCIe and board, and for general chassis flex), and bolt it into a shock-reducing rackmount flight case when not at home. But I'm trying to stick to just lugging around a vintage ThinkPad, and keeping anything larger in self-hosted servers or at cloud providers.
  - imtringued 3y ago
    Or you just get a micro ATX motherboard and a case that mounts it horizontally.
    - neilv 3y ago
      That sounds like a good first-step, when the biggest concern might be relying too much on a PCIe PCB card edge connector as a structural element, as a tower case is bouncing up and down perpendicular to the vertical motherboard. I was thinking of travel environments more hostile than that, when I might really like a road/flight case with shock absorbing. Without custom-fitting a case, rackmount is a good choice, and (with short depth) has the flexibility of looking like a presentable desktop/under-desk if you want to unrack it when not on the road.
- imtringued 3y ago
  External monitor depends on the stand. If the stand is adjustable it most likely can't be disassembled in a way that saves space. I have a normal 19 inch monitor that fits in a backpack because the stand can be disassembled into two components.
- rejectfinite 3y ago
  Powerful desktop + cheaper laptop to remote into it or just use. Some cloud service or server for sync. easy. Why are you trying to do something desktop is not designed for?
rch 3y ago
Have you investigated single phase dielectric liquid immersion?
- TrainedMonkey 3y ago
  Yeah, back when I was into overclocking I looked at exotic methods such as chillers, thermo electric, and liquid submersion. The latter one was interesting way of building fully passive systems due to heat diffusion + lightning effects that looks amazing... the downside is weight and having your PC in the aquarium. With chillers / thermo electric, sizing is a problem because modern overclocked CPUs require monstrous amount of power, which means hugely overbuilt and noisy chillers. Thermo electric requires a lot of power + dedicated water cooling setup... was not really worth it for me.

codetrotter 3y ago

Tbh the three main things that suck about desktop computers for me are: - lots of cables everywhere - when you bring it with you on travels it feels like it’s gonna fall apart internally - external monitor is difficult to safely bring as well. (This one is a problem with the laptop as well because I still use an external monitor there.)

nickstinemates 3y ago
This is why I have always been a fan of my work flow being based around thin clients. You should be able to access your data, projects, anything from anywhere. Then the desktop vs. laptop is a matter of comfort/circumstance. My toolkit for this now involved tailscale for network, nfs/smb shares for data access, and vscode/neovim for programming. It's incredibly powerful
neilv 3y ago
> when you bring it with you on travels it feels like it’s gonna fall apart internally If I had a take a critical desktop-sized PC traveling, I'd consider building it in a rackmount 4U chassis, adding additional bracing (e.g., to keep big GPUs from wrenching on the PCIe and board, and for general chassis flex), and bolt it into a shock-reducing rackmount flight case when not at home. But I'm trying to stick to just lugging around a vintage ThinkPad, and keeping anything larger in self-hosted servers or at cloud providers.
- imtringued 3y ago
  Or you just get a micro ATX motherboard and a case that mounts it horizontally.
  - neilv 3y ago
    That sounds like a good first-step, when the biggest concern might be relying too much on a PCIe PCB card edge connector as a structural element, as a tower case is bouncing up and down perpendicular to the vertical motherboard. I was thinking of travel environments more hostile than that, when I might really like a road/flight case with shock absorbing. Without custom-fitting a case, rackmount is a good choice, and (with short depth) has the flexibility of looking like a presentable desktop/under-desk if you want to unrack it when not on the road.
imtringued 3y ago
External monitor depends on the stand. If the stand is adjustable it most likely can't be disassembled in a way that saves space. I have a normal 19 inch monitor that fits in a backpack because the stand can be disassembled into two components.
rejectfinite 3y ago
Powerful desktop + cheaper laptop to remote into it or just use. Some cloud service or server for sync. easy. Why are you trying to do something desktop is not designed for?

rch 3y ago

Have you investigated single phase dielectric liquid immersion?

TrainedMonkey 3y ago
Yeah, back when I was into overclocking I looked at exotic methods such as chillers, thermo electric, and liquid submersion. The latter one was interesting way of building fully passive systems due to heat diffusion + lightning effects that looks amazing... the downside is weight and having your PC in the aquarium. With chillers / thermo electric, sizing is a problem because modern overclocked CPUs require monstrous amount of power, which means hugely overbuilt and noisy chillers. Thermo electric requires a lot of power + dedicated water cooling setup... was not really worth it for me.