7 ms·
From a follow up post on Mastadon https://social.treehouse.systems/@AsahiLinux/110497512340479064 https://social.treehouse.systems/@AsahiLinux/110497512340479..
by zamadatix 3y ago
From a follow up post on Mastadon https://social.treehouse.systems/@AsahiLinux/110497512340479064 https://social.treehouse.systems/@AsahiLinux/110497512340479...:
"Also in this update:
We now have a cpuidle driver, which significantly lowers idle power consumption by enabling deep CPU sleep. You should also get better battery runtime both idle and during sleep, especially on M1 Pro/Max machines.
Thanks to the cpuidle driver, s2idle now works properly, which should fix timekeeping issues causing journald to crash.
Also thanks to the cpuidle driver, CPU boost states are now enabled for single- and low-threaded workloads, noticeably increasing single-core performance.
Thermal throttling is now enabled, which should keep thermals in check on fanless (Air) models. There was never a risk of overheating (as there are hard cutoffs), but the behavior should now more closely match how macOS works, and avoid things getting too toasty on your lap.
Random touchpad instability woes should now finally be gone, thanks to bugfixes in both the M1 (SPI) and M2 (MTP) touchpad drivers.
A bugfix to the audio subsystem that fixes stability issues with the headphone jack codec.
New firmware-based battery charge control, which offers fixed a 75%/80% threshold setting. To use this, you need to update your system firmware to at least version 13.0, which you can do by simply updating your macOS partition to at least that version or newer. This new charge control method also works in sleep mode.
U-Boot now supports the Type A USB ports (and non-TB ports on the iMac), so you can use a keyboard connected to any port to control your bootloader.
And last but not least, this kernel release includes base support for the M2 Pro/Max/Ultra SoCs! We are not enabling installs on these machines yet as we still have some loose ends to tie, but you can expect to see support for this year's new hardware soon."
- imbnwa 3y ago>And last but not least, this kernel release includes base support for the M2 Pro/Max/Ultra SoCs! We are not enabling installs on these machines yet as we still have some loose ends to tie, but you can expect to see support for this year's new hardware soon." Amazing
- vanburen 3y ago"New firmware-based battery charge control, which offers fixed a 75%/80% threshold setting. To use this, you need to update your system firmware to at least version 13.0, which you can do by simply updating your macOS partition to at least that version or newer. This new charge control method also works in sleep mode." This is interesting, am I correct in thinking this a feature implemented by Apple and now supported by the Asahi team? Does that mean that macOS supports this charge control feature? I really hope Apple brings the same charge limiting to iPhone as well.
- brynet 3y ago> This is interesting, am I correct in thinking this a feature implemented by Apple Yes, battery charge control is a hardware(/firmware) feature supported on other modern laptops as well, such as the Lenovo ThinkPads, but it's not a standard so it requires explicit driver and OS support. OpenBSD recently added support for this as well for both of these implementations (Apple silicon and ThinkPads). https://marc.info/?l=openbsd-cvs&m=168436150408382&w=2 https://marc.info/?l=openbsd-cvs&m=168436150408382&w=2 https://marc.info/?l=openbsd-cvs&m=168458409622780&w=2 https://marc.info/?l=openbsd-cvs&m=168458409622780&w=2 https://marc.info/?l=openbsd-cvs&m=168521616605492&w=2 https://marc.info/?l=openbsd-cvs&m=168521616605492&w=2 I know certain Android/Samsung phones support this as well, not sure about iOS/macOS.
- londons_explore 3y agoIf your laptop firmware doesn't support it, here is one trick if you have a removable battery: Put a piece of paper over one of the batteries middle contacts. That will make the firmware think the battery is overheating. It will then refuse to charge, but will still happily discharge. You can do that to keep your battery at 80% while still on AC power. Handy if you operate from AC power 99% of the time, yet don't want your battery to die from being stored at 100% charge and hot for many years.
- mschuster91 3y ago> Put a piece of paper over one of the batteries middle contacts. Bad, very bad idea if you don't know what you are doing - depending on where the "smarts" in the BMS are, you may damage your battery or make your BMS think the pack is broken or prevent your BMS from recognizing a charge state mismatch (and in the worst case, a cell going undervoltage or reverse polarity) as you have a good chance that you cut off one of the cell balancer contacts. This trick only works with removable phone batteries.
- londons_explore 3y agoWould an engineer really make a consumer design where a sliding contact failing open led to a safety incident? Every laptop since the 90's has the balancing and protection circuitry inside the battery, not inside the laptop.
- londons_explore 3y ago> e includes base support for the M2 Pro/Max/Ultra SoC Does this mean Apple gave them prerelease hardware early? Might apple start helping these guys more - like for example donating a 5 person dev team for a few months maybe?
- sounds 3y agoM2 Pro/Max were available in January. I think they needed to wait until now to be sure the M2 Ultra announcement didn't have too huge of changes from the way the M1 Ultra was done. In other words, the Asahi Linux team don't have an M2 Ultra to test on, they are getting ready for when they can get some test results, possibly from users. Please consider donating if you have the means. https://asahilinux.org/support/ https://asahilinux.org/support/
- GeekyBear 3y agoIt means that Apple isn't radically changing the internals of the SOC every year. >Apple’s first iPhones ran on Samsung SoCs, and even as Apple famously announced that they were switching to their own designs, the underlying reality is that there was a slower transition away from Samsung over multiple chip generations. “Apple Silicon” chips, like any other SoC, contain IP cores licensed from many other companies; for example, the USB controller in the M1 is by Synopsys, and the same exact hardware is also in chips by Rockchip, TI, and NXP. Even as Apple switched their manufacturing from Samsung to TSMC, some Samsung-isms stayed in their chips… and the UART design remains to this day. https://asahilinux.org/2021/03/progress-report-january-february-2021/ https://asahilinux.org/2021/03/progress-report-january-febru...
- gigatexal 3y agoSuch an amazing set of engineers jacking away at this. What awesome work they’re doing.
- gigatexal 3y agough ruined by autocorrect s/jacking/cracking
- userbinator 3y agoSome engineers are probably of that persuasion too. I'm not going to judge. LOL.
- gigatexal 3y agosmirking as an engineer myself I can only confirm as much haha.
- sgtnoodle 3y agoI thought you meant like a jack hammer.
- gigatexal 3y agoYup. That’s exactly what I meant.
- matheusmoreira 3y agoHuge respect for these people. Wish I could do what they do.
- pbasista 3y agoI also appreciate the detail in which the Asahi team presents the progress they have made. I do not follow Apple's release notes so I cannot compare.
- Gigachad 3y agoThe Apple release notes for macos look like this https://www.apple.com/macos/sonoma-preview/ https://www.apple.com/macos/sonoma-preview/
- brohee 3y agoAnother follow up on Mastodon is about the ban evasion that HN does specifically for Asahi. https://social.treehouse.systems/@marcan/110503050993279759 https://social.treehouse.systems/@marcan/110503050993279759 I find it pretty tasteless for HN to do that.
- e40 3y agoIt’s a little hard to understand what is going on. Can you explain? Thanks.
- pyrox 3y agoAsahi Linux's site previously redirected any site with the Referer header set to 'news.ycombinator.com' to google.com. They did this because they believe that Hacker News' community fosters a hostile environment, and thus it was blocked. Setting `rel=noreferrer` on an `a` tag means that the browser will not submit this header, thus meaning this sort of redirect will not occur. Also(as per Marcan's Mastodon account), this rel tag has only been added to asahilinux.org links, not any other links on HN. This means that the moderators of HN believe that the commentary that has in the past been quite misinformative should be allowed, and they are deciding to bypass the block that was put in place by the Asahi team. Now, as per https://social.treehouse.systems/@marcan/110503331622393719 https://social.treehouse.systems/@marcan/110503331622393719 , they're adding an HTML header to anyone who has submitted a post to HN(or has the submit page in their history), as they have no other way of doing anything, as they no longer have the Referer header.
- 101011 3y agoThis raises interesting moral questions that I'm not sure I have an answer to. For one, I don't believe this place fosters a hostile environment, although it's definitely a place where people love to tell you how you're technically wrong about something. For another, I would guess that there are a very limited number of websites that would opt into this sort of anti-traffic behavior. Hacker news could certainly choose to honor it, but it also feels within their right to bypass the block. I wonder if there's a sort of middle ground, where HN alerts the user of the redirect that would have occurred, but still shoots the user to the desired location. But now you're getting into user flows and begging the question as to why the redirect is there in the first place. I'd love to know more about the perceived hostility, even reading up on Mastodon left me with more questions than answers.