7 ms·
Logitech Partners with iFixit for Self-Repairs
- FloatArtifact 4y agoUnfortunately, this doesn't address the update issue of OS software.
- newsclues 4y agoI try not to use their software at all. Don't need to install fancy software for a mouse. Found a free alternative to control the keyboard RGB that isn't bloatware trash.
- nicolaslem 4y agoOn the topic of software, I got a pleasant surprise when my Corsair mouse got a firmware update directly from fwupd on Linux.
- hinkley 4y agoAs a programmer, having page up and page down mapped to buttons 6 and 7 is a game changer for reading code. I don’t like installing their drivers though. Wish they had a simpler tool that programmed the mouse instead.
- FeistySkink 4y agoSwitches are usually the first to go in all my Logitech mice in the past 20 years. I resoldered those several times in some models (e.g. Performance MX). I wonder how and if these repairs will be accommodated. Furthermore they usually put screws under the feet that are not really meant to be reused (I did reuse them in the past but that ended up looking rather ghetto).
- mewse-hn 4y agoI own 3 logitech G600 mice now because the button switches wear out. I think I'd be more impressed if logitech put hot-swap sockets in their mice for the switches (asus is doing this on their mice).
- mqus 4y agoI learned that those switches are actually pretty standardized and you can just desolder them and buy proper ones for ~1$ and at least my older G500 could be opened and disassembled fairly easily.
- 83 4y agoYeah, most mice I've opened up have the same rectangular black switch (Omron d2fc or similar). They're pretty easy to replace.
- jimbob45 4y agoSame. Lost a perfectly good G403 Hero to double clicking and spinning out. A quick perusal through r/MouseReview shows that this is nearly an epidemic among Logitech users PSA: optical switches cannot ever get the double click issue. There are quality inexpensive optical switch mice to choose from as well.
- Forricide 4y agoJust in case - My G600 started double clicking ~2yr ago. I hate replacing things, so I tried a bunch of guides to fix it - opened it, cleaned the switches, soaked them in alcohol, etc. It would stop double clicking for an hour but then would happen again. Was going to pick up a new one when I read a reddit comment that said it could be static buildup in the mouse & that just spamming both the buttons at the same time for 30s could fix it. I did this and ... it fixed it. I also usually hold the mouse upside down while doing this so maybe it was just dislodging dirt that the alcohol didn't get. Who knows. In any case, holding the G600 upside down and just spamming r+lclick for 30s generally solves the problem for me for at least a few months. (I've been heavily using the mouse since ~2016) Maybe this helps, maybe not. Side note - I love this mouse. Tried to switch to a Razer mouse and it broke within 3 months. RMA'd it and the replacement had a bad side button so I just gave up and went back to the G600. It's not ideal for my use case but finding a good mouse does seem impossible these days.
- Yizahi 4y agoOk, I don't know what is this dark magic and how it works, but it mostly helps, reducing double click on my old G602 by A LOT. Thank you very much dear stranger, you were the best part of my day today, saving me a hundred bucks :) . PS: on my desktop I've been using Asus Gladiator wired mouse. I can recommend it, no sign of doubleclicking over a few years. Just don't buy revision with rubber inserts, those came off eventually (but can be glued back).
- squishy47 4y agothis is fantastic. only the other day i was wondering how i would replace my mx master mouse battery when the time comes. it may not be perfect but this is a big step in the right direction. well done logitech.
- swozey 4y agoI know a lot of people complain about double clicks or switches going bad but I don't think I've ever had a Logitech mouse die on me. I buy the latest MX, Vertical, and trackball almost every year unless it's super minor updates so maybe I'm just not using one mouse long enough but they've been fantastic. I'm using my Elecom Deft Pro trackball right now and while it's nice it doesn't come close to feeling like the quality that my Logitech trackball feels.
- slondr 4y agoI used a G700S for nearly ten years, only got rid of it because a decade of human use caused it to get pretty gunked up. I never had a mechanical failure in that whole period.
- wlesieutre 4y agoI had a G700S and it died of button failure. Great mouse, I miss the 4-button thumb layout. Before that was a Deathadder, also button failure. The only mouse I've replaced for any other reason was a Corsair M60 which had its cord chewed off by a friend's rabbit. We soldered it back together but it didn't last. Now on a Razer Basilisk Ultimate which uses some sort of optical click detection, we'll see if that's actually more durable or not. There's still a physical mechanism to produce the clickiness but I don't know if that part is failure prone like the mechanical buttons have been.
- rickdeckard 4y agoWell, from your description alone any damage you experience within one year would fall under legal warranty in most countries, so Logitech would hurt themselves as they would have to replace/repair it. What's more interesting is how well the product works after 3~5 years. I had a few Logitech mice which worked fine, but i.e. had a matte rubber coating which inevitably dissolves and gets sticky after a few years...
- randunel 4y ago> I buy the latest MX, Vertical, and trackball almost every year unless it's super minor updates so maybe I'm just not using one mouse long enough but they've been fantastic. That's exactly why you don't experience issues, your devices don't spend enough time getting clogged with sweat, oil, dry skin and dirt. All of my gamer friends use Logitech to the max of their abilities, and almost all have experienced issues with their products. We're from a poor country, originally, so we only change the gear when it's absolutely needed. Personally, I only recently retired my old MX518 bought in 2005 and I had to rewire it twice in 25 years, the USB cable fractured each time, but the mouse itself was flawless until, 25 years later, the MOUSE3 button stopped working. I like the idea of having repair guides for devices, to fiddle less when self repairing. I'd expect fewer negative reviews once these guides get published.
- scohesc 4y agoThey're probably only going to sell circuit boards or assemblies for their mice - I've got a G602 (G502?) and the switches have worn out every once in a while. I just opened it up, grabbed the model of the actual switches, did some reading online about the switches (which models have harder actuation forces, etc.) and ordered and soldered new replacement switches from DigiKey and swapped them myself. I understand a lot of people don't have this skill - I'd like to have some kind of business or side hustle to replace switches for common equipment like mice, xbox controllers, etc. Especially with xbox controllers costing so much and only having something like a 3 month warranty, I've noticed the newer ones having bumper activation issues after 6-8 months (depends on how aggressive you are as a gamer I guess)
- rickdeckard 4y agoI would appreciate also firmware, but that's likely to remain a dream. My biggest annoyances with HID-equipment of the past decade were keyboards with firmware bugs (i.e. not accepting key-combos in all orders due to some QA-oversight, not having Home/End on Fn+<Left>/<Right>,...). Right now I'm writing on a Dell KB7120W which occasionally "forgets" to send the Ctrl-key. Fun times whenever I want to expand a multiselect with additional items in a GUI and I lose the whole selection...
- tailspin2019 4y ago> I would appreciate also firmware, but that's likely to remain a dream. This was exactly my thought too. Not knocking the self-repair scheme, but in my experience there is quite a disparity between the (relatively high) quality of their hardware - at least with MX mice/keyboards - and the low (IMHO) quality of the firmware and software. I've never had any Logitech hardware fail but I have spent countless hours trying to fix or workaround their software/firmware. I've mostly replaced it all with Karabiner and Hammerspoon now, but I still can't actually use my devices to their full capabilities.
- eviks 4y agoButton switches aren't reliable, and yeah, the software is bad
- mgdlbp 4y agoA small number of consumer keyboards, and lots of DIY designs, some with prebuilt offerings, can run QMK or other open source firmware.
- rickdeckard 4y agoyeah, unfortunately there's no support for consumer keyboards with Bluetooth in QMK (understandably, it's an entirely different layer of complexity). I'm not a sufficient keyboard nerd, I just want a compact well-spaced portable keyboard with Bluetooth and multi-device support, possibly also rechargable. The market is full of such devices at decent pricing, but you need to cope with various firmware bugs which you only find after purchase...
- matthew28845 4y agoThis is great. If the battery on my MX Master ever dies, I'll have an easy way to fix it.
- snailmailman 4y agoI stopped buying logitech mice because the switches wore out in all of them. Multiple mice all stopped working after maybe a year and a half? Issues like "double clicking when should be single clicking" or "not clicking at all" or "clicking and dragging getting registered as just a click". If they either fix this, or make it easy to repair, they might be able to get me back. These were what i considered "higher end" mice, not a cheap $15 mouse, and i got tired of buying them so often. I looked around online and switch issues seem common on a lot of mice. Every mouse company uses the same switches, and they all just wear out. I switched to razer, who apparently uses a different type of switch entirely. It hasn't worn out yet but i've only had it about a year. Fingers crossed.
- pdntspa 4y agoSame, I went through 2 MX Masters in like 2 or 3 years. Now I just get a cheap steelseries and cringe at the rainbow LED
- garciansmith 4y agoI assume you'd turn the LEDs off if you were using Windows using Steelseries' own software. If you use Linux you can turn it off with rivalcfg if your model is supported (https://flozz.github.io/rivalcfg/ https://flozz.github.io/rivalcfg/).
- rasz 4y agoAfaik all Steelseries let you save permanent profile on the mouse. At least lights and dpi are stored, button remapping sadly is done with host software.
- serf 4y agoThis is an old anecdote, but my Razer Lachesis used exactly the same Omron manufactured microswitches as my Logitech G303 and my Kensington Orbit trackball. I have really strange physical requirements for my mice due to disability, and it's generally a pain to find stuff that works for me -- so i've gotten pretty adept and swapping those switches out from sheer necessity. It's a shame that no one (seems) to make any mice with a nice magnetically coupled wear-free switching system. I have such switches on stupid things like my racing sim wheel, but not on stuff that I use daily.
- JustSomeNobody 4y agoThis is cool. I am still rocking an Mx Master. Good to know that when the battery degrades I can just replace that.
- eviks 4y agoSince switches are too bad for such premium mice, does anyone have advice re which mice have great and easily replaceable switchers m (watched some video that switches are operated under the specced voltage that leads to early retirement, but the video offered no good alternative beyond self-replacement)
- mgdlbp 4y agoa quick search might find that there are (asus) mice with socketed switches
- eviks 4y agoThat quick search forgot the second and condition
- mgdlbp 4y agoErr, the first I can see (having no personal experience), but AFAIK the only unmodded mice with toolless switch replacement are certain Asus gaming models. Forums tend to conclude that Asus holds a patent, but I've yet to see anyone find a citation. Ok, you made me actually search - there's also EpicGear and Taidu, apparently.
- molticrystal 4y agoI mostly saw just some tool kits to disassemble and some mouse glider feet for sale, hopefully they catalog will expand soon or if it is comprehensive be easier to find through their search.
- hubraumhugo 4y agoDefinitely needed according to all the exit reviews for their products: https://www.looria.com/reviews/search?value=Logitech https://www.looria.com/reviews/search?value=Logitech
- hinkley 4y agoUSB-C unifying receiver, goddamnit. It’s been seven years, shit or get off the pot. I love Logitech products and have used their mice practically forever. But I’m on my last nerve with the dongle.
- neogodless 4y agoIt took me a second to think through why this comment didn't resonate with me. It's because I use Bluetooth with laptops, and my desktop has over half a dozen USB-A ports (and Bluetooth!) Are there common scenarios where the WiFi dongle being plugged into a USB-C to USB-A adapter is better than Bluetooth?
- hinkley 4y agoThe receiver existed and I think continues to exist because it’s lower latency than Bluetooth and fewer issues with interference. With headphones you need streaming traffic and there are games you can play. With an input device you need responsiveness.
- genpfault 4y agoDoes Wake-On-Bluetooth work anywhere?
- culopatin 4y agoMy Mac wakes up via Bluetooth
- hypercube33 4y agothat or bring back the G500. the weights were dorky but that mouse was simple and comfortable
- mrguyorama 4y agoI sure hope they include some of the more niche stuff like their joysticks, as they are wonderful products mired in abysmal QA. So many flight simmers have a HOTAS from logitech with one or many dead switches or pots.
- Awelton 4y agoThis seems like a lot of work compared to just putting decent switches in their stuff to begin with.