5 ms·

And Intel was the last reliable wifi chip maker I knew. What are good, well supported (on linux) wifi chipsets these days?

amiga-workbench 4y ago
I can only speak for myself here, but I'm running a MediaTek MT7921 on Fedora 37, I picked it up on eBay for £12 and its been spot on. Unlike my Intel AX210 I can actually get a full gigabit down sat next to my router.
- deleted 4y ago
  [deleted]
wtallis 4y ago
Try anything that's well-supported by OpenWRT. Even if you don't need support for AP mode, using a chip+driver pair that meets that standard (i.e. has mature AP mode support from an open-source driver that works on multiple architectures) usually means the client mode is also fully-supported (though maybe not Bluetooth). For 802.11ac, that generally means Qualcomm-Atheros ath10k or Mediately mt76 devices, with the latter being more popular among OEMs for use in client devices.
- eptcyka 4y ago
  Is there anything that's current and supported by OpenWRT? Whilst I love OpenWRT, it's support is more on the level of it works enough to tx/rx packets and not necessarily all of the hardware functionality is enabled and works as per the specification.
  - oynqr 4y ago
    What hardware functionality do you need that OpenWRT doesn't support?
  - wtallis 4y ago
    "All of the hardware functionality is enabled and works as per the specification" is a pretty high bar even for proprietary drivers, especially when the hardware has just hit the market. I think there are now a few hardware platforms capable of using the new 6GHz band channels ("WiFi 6E") on OpenWRT, but I haven't checked recently and haven't been looking to upgrade any of my hardware to support that (I'm doing just fine using 5GHz DFS channels that nobody else in my apartment building is using). I'm not sure what hardware capabilities you think are poorly supported by OpenWRT or the open-source drivers for the known-good hardware choices from the QCA lineage or Mediatek's mt76 family. Can you provide any specifics?
    - heavyset_go 4y ago
      > I'm not sure what hardware capabilities you think are poorly supported by OpenWRT or the open-source drivers for the known-good hardware choices from the QCA lineage or Mediatek's mt76 family. Can you provide any specifics? I can't speak for them, but I've used OpenWRT on routers with Broadcom chipsets, so I think they were saying that OpenWRT support isn't a good litmus test for drivers that support the full functionality of the hardware they're for.
      - wtallis 4y ago
        I specifically said "well-supported by OpenWRT", because even the most cursory investigation of what hardware works well with OpenWRT will warn you away from buying Broadcom.
CameronNemo 4y ago
Mediatek and Qualcomm are pretty well supported afaict. Realtek is hit or miss. Broadcom should probably be avoided.
magila 4y ago
Qualcomm's Atheros descended chips are generally the best bet for Linux support, especially for use in an AP. In other words you want a chip supported by the ath10k or ath11k driver depending on which generation of wifi you want. 10k = 802.11ac, 11k = 802.11ax.
- jrockway 4y ago
  ath10k isn't current hardware, though. We used that for Google Fiber wifi back in 2015. The world now has "Wifi 6" and other such nonsense.
  - Dylan16807 4y ago
    6 is ax. So as the post says, ath11k.
  - wtallis 4y ago
    You could just as easily say that gigabit Ethernet isn't current, either. But gigE clearly isn't obsolete in the way a processor from the mid-2000s is obsolete, and likewise 802.11ac is still at least a few years away from being one of those radio standards that's so inefficient and outdated that it ought to be aggressively retired.

amiga-workbench 4y ago

I can only speak for myself here, but I'm running a MediaTek MT7921 on Fedora 37, I picked it up on eBay for £12 and its been spot on. Unlike my Intel AX210 I can actually get a full gigabit down sat next to my router.

deleted 4y ago
[deleted]

wtallis 4y ago

Try anything that's well-supported by OpenWRT. Even if you don't need support for AP mode, using a chip+driver pair that meets that standard (i.e. has mature AP mode support from an open-source driver that works on multiple architectures) usually means the client mode is also fully-supported (though maybe not Bluetooth). For 802.11ac, that generally means Qualcomm-Atheros ath10k or Mediately mt76 devices, with the latter being more popular among OEMs for use in client devices.

eptcyka 4y ago
Is there anything that's current and supported by OpenWRT? Whilst I love OpenWRT, it's support is more on the level of it works enough to tx/rx packets and not necessarily all of the hardware functionality is enabled and works as per the specification.
- oynqr 4y ago
  What hardware functionality do you need that OpenWRT doesn't support?
- wtallis 4y ago
  "All of the hardware functionality is enabled and works as per the specification" is a pretty high bar even for proprietary drivers, especially when the hardware has just hit the market. I think there are now a few hardware platforms capable of using the new 6GHz band channels ("WiFi 6E") on OpenWRT, but I haven't checked recently and haven't been looking to upgrade any of my hardware to support that (I'm doing just fine using 5GHz DFS channels that nobody else in my apartment building is using). I'm not sure what hardware capabilities you think are poorly supported by OpenWRT or the open-source drivers for the known-good hardware choices from the QCA lineage or Mediatek's mt76 family. Can you provide any specifics?
  - heavyset_go 4y ago
    > I'm not sure what hardware capabilities you think are poorly supported by OpenWRT or the open-source drivers for the known-good hardware choices from the QCA lineage or Mediatek's mt76 family. Can you provide any specifics? I can't speak for them, but I've used OpenWRT on routers with Broadcom chipsets, so I think they were saying that OpenWRT support isn't a good litmus test for drivers that support the full functionality of the hardware they're for.
    - wtallis 4y ago
      I specifically said "well-supported by OpenWRT", because even the most cursory investigation of what hardware works well with OpenWRT will warn you away from buying Broadcom.

CameronNemo 4y ago

Mediatek and Qualcomm are pretty well supported afaict. Realtek is hit or miss. Broadcom should probably be avoided.

magila 4y ago

Qualcomm's Atheros descended chips are generally the best bet for Linux support, especially for use in an AP. In other words you want a chip supported by the ath10k or ath11k driver depending on which generation of wifi you want. 10k = 802.11ac, 11k = 802.11ax.

jrockway 4y ago
ath10k isn't current hardware, though. We used that for Google Fiber wifi back in 2015. The world now has "Wifi 6" and other such nonsense.
- Dylan16807 4y ago
  6 is ax. So as the post says, ath11k.
- wtallis 4y ago
  You could just as easily say that gigabit Ethernet isn't current, either. But gigE clearly isn't obsolete in the way a processor from the mid-2000s is obsolete, and likewise 802.11ac is still at least a few years away from being one of those radio standards that's so inefficient and outdated that it ought to be aggressively retired.