4 ms·
What do folks think about this new generation of smart usb-c soldering irons with a processor? (ts10x and pinecil) My friend who has soldered professionally sw
by m463 4y ago
What do folks think about this new generation of smart usb-c soldering irons with a processor? (ts10x and pinecil)
My friend who has soldered professionally swears by metcal.
- nikau 4y agoI have both a hakko and a ts-100, and honestly I end up just using the ts-100 most of the time as I can run it off a small battery pack. Its kinda like having a dyson battery vacuum vs a proper AC one - the AC vacuum has way better suction, but the dyson is so light and convenient to use and good enough for most things.
- ansgri 4y agoDepends on the AC vacuum — my old Dyson V6 in turbo mode outsucks most AC-powered vacuums I've dealt with. Sometimes new tech is just better.
- nikau 4y agoYou must have used some very very shitty AC vacuums. I have a dyson v6 and a nilfisk x150 - the nilfisk motor is 1600 watts, they aren't even in the same ballpark suction power wise. Without the motor brush head the v6 is pretty useless even in turbo mode.
- thenthenthen 4y agoDyson V8 here...it cant even suck a rice grain on high power mode. Worst vacuum cleaners ever
- nikau 4y agoOut of curiosity I just did a bit of a google, my AC vacuum is 6x the measured suction of the dyson in turbo mode: v6 normal - 24 air watts v6 turbo - 100 air watts nilfisk x150 - 600 air watts
- jonathonlui 4y agoNot a pro, but the handful of times a month I solder, the Pinecil has been great. It can use TS100 tips so easy to get different tips. It packs easily away in a plastic shoebox with my soldering accessories and consumables along with whatever project I'm currently working on.
- isatty 4y agoI’m used to Weller irons, and personally had a hakko 888 but for home use (where I currenrlt don’t have a dedicated electronics bench) I love my pinecil. So convenient to just hook it up to my MacBooks brick.
- unxdfa 4y agoStay the hell away from the USB-C ones. They are toys. And yes your friend is right: spend on a Metcal. The PS900 is decent if you don’t want to spend on a higher end iron.
- johnwalkr 4y agoI have a genuine Hakko 888, a “T12 clone” and a pinecil. These clones are usually not fake Hakko products but they use the very common T12/T15 tips. I got the T12 clone because I was moving and wanted something that worked on the voltage of my new country (it has a DC power input so it’s easy to change). This clone was like $20 and works just as well if not better than the real Hakko. But I have yet to set it up in my new place because the $25 pinecil also works just as well and is so small and works on a usb-c power supply which I always have plugged in at my desk anyway. So really I would just recommend the pinecil as your first iron.
- qup 4y agoPinecil is $40 now. I got one and can't figure out how to power it, it complains about my power source. Is it picky? Any ideas?
- wrycoder 4y agoPinecils are $26 on pine64.com atm.
- qup 4y agoI got amazon'd
- qwezxcrty 4y agoIt works with my Xiaomi and Lenovo 65W chargers. Maybe you can check the power of your charger and if it supports the PD protocol.
- johnwalkr 4y agoNot really, I’ve been using it at 15V and 20V. Not sure if it will work at 12 or 9. It will work at 5.
- johnwalkr 4y agoTypo: it will not work at 5V.
- qwezxcrty 4y agoI use Weller stations at work, and have a Pinecil V2 at home. Have to admit haven't use it so heavily, nor attempted to solder SMTs with it, but it seems good enough for through hole devices.
- Oxidation 4y agoMetcal (actually OKI) changed my life, and for under $200 all in second-hand with a selection of tips and the option to add another handpiece (dual port power supply).
- Havoc 4y agoPinecil has been working out well for me. Haven't been using the smart parts of it, but definitely a good step up from the cheap amazon stuff. Also discovered that the barrel jack (and power req) are compatible with some asus laptop bricks