7 ms·
>I saw that rack mount makes things cost significantly more. there's a logical reason for this though. it's a pretty safe assumption that you're in a larger fa
by dylan604 4y ago
>I saw that rack mount makes things cost significantly more.
there's a logical reason for this though. it's a pretty safe assumption that you're in a larger facility if you're rack mounting. a lot of rack mount chasis come with features like dual PSUs and other redundant features. redundancy does cost.
>put a rack in the basement or a utlity room
They make enclosures[0] that are smaller than a full rack, but allow for rack mounting equipment. you can then just shove this enclosure on a shelf or wherever. much more convenient than a full on server rack.
[0] https://www.amazon.com/Wall-Mount-Server-Rack-Cabinet/dp/B0721XSYZJ/ref=sr_1_4?keywords=computer+enclosure+cabinet&qid=1676573324&s=electronics&sprefix=computer+enclosu%2Celectronics%2C114&sr=1-4 https://www.amazon.com/Wall-Mount-Server-Rack-Cabinet/dp/B07...
- amelius 4y agoAnother reason is that it's targeted at businesses, not consumers.
- ziml77 4y agoIn most cases I do agree the extra price is there for a reason. It was specifically the UPSes that seemed absurd. And the reason I would put the equipment in another room would be to keep the heat away from the living space. A basement would be especially good for that since it's natually a cooler area. Still good to know about the smaller racks though. My bank account is much healthier than the last time I looked into rack mounting so I might actually get one that size for my apartment now. It would really neaten things up.
- dylan604 4y agoI bought one (probably not the exact one i linked) for mounting a UPS and a home security camera DVR unit (I don't buy into the security as a service from all of those options), but it never got installed. So the DVR/UPS just sit stacked on a shelf unprotected, but that's what the missus wanted. So now it's that thing that just sits there taking up space that is hard to sell at a garage sale, and I can't be bothered to create an ebay account to sell it. Also, even if you don't have rack mount equipment, they make the shelves you can attach to the rack mounts and set other gear on them. So yeah, you can really clean some stuff up with these.
- giobox 4y agoYou basically can't get a "PC" into any of the cheap small wall mount solutions I've seen on Amazon or elsewhere - they are almost always around half or less the depth of a "real" server chassis. A 1U/2U rack mount PC needs a fair amount of depth to fit, especially one with a fullsize GPU etc. You can do something like a Mac Mini/Studio or Intel Nuc sitting on a rack shelf, or some racked SBCs like the Pi, but not so much custom PCs. These cheap wall mount units including the one you linked are great for rack mount network or AV equipment, not so much to rack your PC build like Jeff did here. The width for server racks is standardized - the depth however varies enormously from rack to rack, with wall units usually being pretty shallow. I'm not sure most people would even want something as deep as a say a typical 2nd hand 1U/2U blade server hanging on the wall - they often need 29 inches or more.
- geerlingguy 4y agoThis particular case (the one featured in the OP) is about 14" deep, so it would fit in the small wall mount or networking/AV racks.
- giobox 4y agoIs this number including an extra ~2-4 inches for the power cable clearance at the rear? In your new case and most others, power and cooling at the rear requires a few inches of clearance in addition the depth of the case itself, otherwise the power cable cant physically fit. I've made this mistake before, with a wall mount rack those extra few inches matter in a way it doesn't for a free standing one, where cables can extend beyond rear edge of the rack without meeting a wall. EDIT: The box Jeff has used is one of the few I've seen that might actually work well in a wall rack, if you can live with an mATX form factor motherboard in your build, at ~9 inches, which leaves enough room for power and air at rear. If you want a Linus Tech Tips style gaming rig or mid/fullsize tower build in a rack, I still think you might need to go free-standing most of the time.