6 ms·

As an American I think our measurement system is the best because of its name. Imperial. The fact that the US has dominated while on a totally different is pre

As an American I think our measurement system is the best because of its name. Imperial. The fact that the US has dominated while on a totally different is pretty wild

defrost 4y ago
While the American system of measurement often is referred to as the Imperial System, this usage is erroneous. The US, ever since the formative years of the New World-nation, has used the *US Customary System*. The Imperial System, alternatively, was established in 1824 for Great Britain and its colonies. Even today, decades after officially switching to SI (metric) units, volume in the UK is measured in British Imperial units. ~ https://blog.ansi.org/2018/06/why-pint-bigger-in-uk-than-in-us-volume/ https://blog.ansi.org/2018/06/why-pint-bigger-in-uk-than-in-... For further fun, what year did the US Office of Weights and Measures adopt the metric system as the foundation for the Official National System and formally define the US foot in terms of the SI metric length?
charlieyu1 4y ago
I find it quite strange that the British don't use imperial units anymore.
- was_a_dev 4y ago
  Not strange at all. Working in a metric system is beneficial to our economy, and trading out to the rest of the world. The options are to trade in Imperial measurements with the US, or the entire global economy in Metric. The US can weather that difference given its size both physically and economically
  - irdc 4y ago
    > trade in Imperial measurements with the US The US doesn't use the Imperial system but it's own customary system. For example, the Imperial pint is about 568 mL, whereas the US customary pint is about 473 mL (liquid pint) or about 551 mL (dry pint). Both are 1/8th of a gallon as defined in each respective system. (notice how I conveniently included the metric equivalent of both measurements?)
- dogma1138 4y ago
  Eh? Have you seen the mess that is the British measurement system? Distances are in meters if they are short, miles if they are long, Leeds will be 275 miles away from your gas station that would charge you by the liter so would be most other liquids unless they are milk or beer, then you’ll get a mixtures of metric pipes with inch threads and inch pipes with metric threads, when you buy a property the land would be demarcated in acres, build up area in square feet and priced in meters squared… and when you over eat because of all the stress of having to memorize 1000 different measurement units your doctor would tell you that you gotta drop a few stones…
  - cameronh90 4y ago
    Things like threads sizes staying imperial makes sense to me. I believe they are now technically defined in mm, but obviously it's still based on fractions of an inch. In my view, there aren't any truly compelling reasons to switch from BSP to something based on natural metric measures. On the other hand, if we were to replace these pipe fittings with metric, we'd end up with a mixed system for realistically at least a century, if not a lot longer due to how long pipe systems last. The complexity (and also, in some cases, danger) of having to maintain both systems for so long would be incredible. It's similar to how in flying, we still use feet/flight levels, and actually a few places have migrated from metric to the more conventional imperial system. Imperial pipe fittings are pretty common across the entire world, in fact. I think most countries outside of UK/USA use BSP (often by a different name), but NPT is also sometimes used - and even BSP vs NPT is a huge pain.
    - dogma1138 4y ago
      The problem is that BSP only applies to a specific types of pipes, soft water piping like PEX, gas and other pipes are often a mishmash of thread standards as they are not covered by BSP. So in reality there already is a mixed system which is often what causes a lot of headaches, what’s worse is that BSP is also a mixed standard it has both metric and imperial measurements for its standard threads however when you mix fittings that were machines using metric and pipes that were machined with imperial I’ve found that because of slight tolerance differences you often can get into a point where stacked tolerances becomes and issue.
- BerislavLopac 4y ago
  Oh they do, in everyday life: * Road distances are measured in miles. * Drinks are ordered in pints. * People measure height in feet/inches and weight in stones. But yes, pretty much everything else is metric.
  - beardyw 4y ago
    I have been measuring my weight in kilos for a long time. Height though, well that doesn't change so it has been pre-metric up to my recent age related shrinkage! I had to declare both my new height and weight on a form, so now I have a metric height!
- perilunar 4y ago
  Why? They are not an empire anymore either.

As an American I think our measurement system is the best because of its name. Imperial. The fact that the US has dominated while on a totally different is pretty wild

defrost 4y ago

While the American system of measurement often is referred to as the Imperial System, this usage is erroneous. The US, ever since the formative years of the New World-nation, has used the *US Customary System*. The Imperial System, alternatively, was established in 1824 for Great Britain and its colonies. Even today, decades after officially switching to SI (metric) units, volume in the UK is measured in British Imperial units. ~ https://blog.ansi.org/2018/06/why-pint-bigger-in-uk-than-in-us-volume/ https://blog.ansi.org/2018/06/why-pint-bigger-in-uk-than-in-... For further fun, what year did the US Office of Weights and Measures adopt the metric system as the foundation for the Official National System and formally define the US foot in terms of the SI metric length?

charlieyu1 4y ago

I find it quite strange that the British don't use imperial units anymore.

was_a_dev 4y ago
Not strange at all. Working in a metric system is beneficial to our economy, and trading out to the rest of the world. The options are to trade in Imperial measurements with the US, or the entire global economy in Metric. The US can weather that difference given its size both physically and economically
- irdc 4y ago
  > trade in Imperial measurements with the US The US doesn't use the Imperial system but it's own customary system. For example, the Imperial pint is about 568 mL, whereas the US customary pint is about 473 mL (liquid pint) or about 551 mL (dry pint). Both are 1/8th of a gallon as defined in each respective system. (notice how I conveniently included the metric equivalent of both measurements?)
dogma1138 4y ago
Eh? Have you seen the mess that is the British measurement system? Distances are in meters if they are short, miles if they are long, Leeds will be 275 miles away from your gas station that would charge you by the liter so would be most other liquids unless they are milk or beer, then you’ll get a mixtures of metric pipes with inch threads and inch pipes with metric threads, when you buy a property the land would be demarcated in acres, build up area in square feet and priced in meters squared… and when you over eat because of all the stress of having to memorize 1000 different measurement units your doctor would tell you that you gotta drop a few stones…
- cameronh90 4y ago
  Things like threads sizes staying imperial makes sense to me. I believe they are now technically defined in mm, but obviously it's still based on fractions of an inch. In my view, there aren't any truly compelling reasons to switch from BSP to something based on natural metric measures. On the other hand, if we were to replace these pipe fittings with metric, we'd end up with a mixed system for realistically at least a century, if not a lot longer due to how long pipe systems last. The complexity (and also, in some cases, danger) of having to maintain both systems for so long would be incredible. It's similar to how in flying, we still use feet/flight levels, and actually a few places have migrated from metric to the more conventional imperial system. Imperial pipe fittings are pretty common across the entire world, in fact. I think most countries outside of UK/USA use BSP (often by a different name), but NPT is also sometimes used - and even BSP vs NPT is a huge pain.
  - dogma1138 4y ago
    The problem is that BSP only applies to a specific types of pipes, soft water piping like PEX, gas and other pipes are often a mishmash of thread standards as they are not covered by BSP. So in reality there already is a mixed system which is often what causes a lot of headaches, what’s worse is that BSP is also a mixed standard it has both metric and imperial measurements for its standard threads however when you mix fittings that were machines using metric and pipes that were machined with imperial I’ve found that because of slight tolerance differences you often can get into a point where stacked tolerances becomes and issue.
BerislavLopac 4y ago
Oh they do, in everyday life: * Road distances are measured in miles. * Drinks are ordered in pints. * People measure height in feet/inches and weight in stones. But yes, pretty much everything else is metric.
- beardyw 4y ago
  I have been measuring my weight in kilos for a long time. Height though, well that doesn't change so it has been pre-metric up to my recent age related shrinkage! I had to declare both my new height and weight on a form, so now I have a metric height!
perilunar 4y ago
Why? They are not an empire anymore either.