6 ms·
Your First IPv6 Request
- greyface- 4y agoBeware: https://www.arin.net/resources/fees/fee_schedule/#rsp-service-categories-and-fees https://www.arin.net/resources/fees/fee_schedule/#rsp-servic...
- zerotolerance 4y agoNeat note at the bottom, “* There is a temporary IPv6 fee waiver for organizations in the 3X-Small service category. A 3X-Small organization may receive registry services for up to a /36 of total IPv6 space and remain in the 3X-Small service category. This waiver will expire 31 December 2026.”
- IgorPartola 4y agoMy understanding is that as a single user I cannot get an allocation for a home lab or a small set of VPSs. The (very reasonable) requirements are that you need to be multi homes, or need lots of networks for e.g. employees or have 13+ different offices for the smallest allocation. This is very good info but isn’t for a hobbyist.
- ipython 4y agoYou can get small free ipv6 allocations from hurricane electric’s tunnel broker (tunnelbroker.net) Of course those aren’t “portable” assignments but it’s great for experimenting and such.
- IgorPartola 4y agoThat’s not really an allocation. I use it currently but it’s by no means ideal.
- zauguin 4y agoI don't know about ARIN, but I got an PI assignment from RIPE for my home lab without issues.
- sigio 4y agoAny LIR can get a /29 (or /32), and probably anyone that can find a sponsoring LIR can get a /48 no questions asked.
- IgorPartola 4y agoWhat is a LIR?
- hampereddustbin 4y agoWikipedia says it is >A local Internet registry (LIR) is an organization that has been allocated a block of IP addresses by a RIR, and that assigns most parts of this block to its own customers RIR being Regional Internet Registry https://en.wikipedia.org/wiki/Regional_Internet_registry https://en.wikipedia.org/wiki/Regional_Internet_registry
- sleepydog 4y agoWho do you peer with? How do you make your prefix publicly routable? Or do you only use it privately?
- zauguin 4y agoI currently peer (via tunnels through my IPv4 connection) with securebit (aka tunnelbroker.ch), freetransit.ch and route48.org (but the list varies a bit over time), The original motivation was my frustration about my ISP not offering native IPv6 and general interest in internet routing.
- preisschild 4y agoTried to go this route too, but got stuck setting up Bird2 over GRE tunnels. Do you mind sharing your config if you use Bird or similar?
- yakcyll 4y agoOne thing that struck me was the sizes of blocks assigned. I get a dynamic /64 prefix from my ISP at home, which would be large even if it were assigned to my work office; why is the maximum prefix length /48 for a single site and /32 for 3k sites? Aside from the obvious argument of wastefulness, aren't we just priming the same issue we have with IPv4 now to occur thirty, forty years down the line?
- sigio 4y agoJust see it as a 64-bit address-space, as one /64 will be for 1 home/location/lan. Then we still have 32^32 times the amount of address-space we have in v4.
- hampereddustbin 4y agoDoesen't /64 mean that you can't create additional subnets within your ISP given range? I thought /56 was the smallest allocation an ISP could make for a residential allocation. I think it's great that the smallest subnet size is designed to be as large as to never run out of addresses in any conceivable application, no more wasting precious time manually assigning addresses and thinking about subnet economics
- jeroenhd 4y ago/56 is the smallest they're supposed to allocate for customers, but I've read stories about ISPs providing people with /128s on their CPEs... A /64 can actually cause problems if you're chaining routers together. In IPv4 that'd give you double NAT which is obviously terrible and not recommended, but in IPv6 that's a fine use case that shouldn't cause any trouble as long as you have the ability to create sufficient subnets. With a /64, you're stuck doing weird stuff with DHCPv6 to get the subnets to work regardless.
- aidenn0 4y agoYou don't need double-NAT with ipv4 to chain routers together, just route between different private-allocation subnets. I was running a setup like that to get ethernet access to a part of the house via wifi. Changed it for ipv6 though because my isp only gives me a /64
- roody15 4y agoI work at medium size school district with 7 building locations and just over 300 employees. I was denied an IPv6 block as I was deemed too small. Continued to be annoyed at the IPv6 rollout. I have 26 static IPv4 addresses that have worked great and continue to do so.
- jabart 4y agoI think all of ARIN requests require that you be multi-homed to more than one upstream internet provider. If you are not, then you can ask your ISP for a IPv6 block. Assumption here since you don't have a /24 range. This was part of one of our requests when asking for IPv4 addresses was which networks we would peer with and we had to list more than 1.
- ikiris 4y agoThen you did it wrong, because that's not how that works. You can get ip space with trivial need and multihoming.