2 ms·
You have 6 pins on each row that are supposed to each have their own wire coming from the PSU. If you bend the connector and only 5 pins connect then you expect
by imtringued 4y ago
You have 6 pins on each row that are supposed to each have their own wire coming from the PSU. If you bend the connector and only 5 pins connect then you expect to get 5/6 of the power the connector can handle.
The adapter has connected all four wires to all six pins. Losing one of the four cables is actually irrelevant because that means less power is going into the pins. What matters is that if you are missing one pin, then all 300 watts (single row) will go through the remaining pins. Power density is now 60 W per pin. Lose another pin and you get 90W per pin over the four remaining pins. This wouldn't happen with a dedicated cable per pin.