6 ms·
I have 6 digits worth of these chips. They've been running fine for years in all sorts of weather conditions. Mining does not destroy cards. The paste goes bad
by latchkey 4y ago
I have 6 digits worth of these chips. They've been running fine for years in all sorts of weather conditions. Mining does not destroy cards.
The paste goes bad, but is easily replaced (majority of our cards have been running just fine with OEM old paste). We don't have fans on the cards, but if we did those would go bad and easily replaced. But the cards themselves, really don't go bad very often.
If you're thinking about picking some up, don't worry about the mining part, but definitely use that to try to get a discount.
- bravetraveler 4y agoOne thing I find kind of interesting about this -- the folks dumping cards on the market had farms. Those running mining farms are playing a numbers game This involves under-clocking and under-volting the cards, while also ensuring they're cooled well. I think an argument could be made that mined-on cards are more well cared for than those owned by your average gamer. There's not some 'destroy the ASIC' instruction. Work is work. Mined on cards undergo fewer duty cycles, I wonder how the calculus works out between one long mild duty cycle compared to many more that are also more extreme.
- latchkey 4y agoMost large farms don't have the ability to properly tune cards for best ROI. At scale, it is too hard because each card is a snowflake in terms of performance. In order to tune, you're basically pushing the card to the limits of underclock/undervolt... which means the card crashes. Therefore, most large farms actually undertuned, for stability, which is the least abusive on the cards. If the card crashes due to tuning, the machine crashes, and the rest of the cards are taken offline until the machine reboots. In order to change settings, you have to reboot the entire machine too. It is a pain in the ass to find optimal tuning at scale. There is no publicly available software to 'autotune' cards at scale. It took me a long time to first learn how to tune cards (by hand tuning thousands of cards and getting a feeling for things) and then once I figured that out, I built software to do this. It required changes in the AMD driver to get it to output in the kernel messages, which card was crashing. It required updating the mining software itself. It was a nutty insane project, but it worked well. We hit our target hashrate / power usage.
- hailwren 4y agoWhat are you doing now? Did you shut the project down entirely?
- latchkey 4y agoSome is shut down, some is mining other coins. Kind of a wait and see time right now.
- arcticbull 4y agoThe planet thanks you for shutting down. Don't worry, I'd say the same for any tobacco executive.
- latchkey 4y agoOur power is unused hydro, in a geographic location full of other data centers for all the large tech companies. This comment is just your continued trolling with your anti-crypto trope. Please try another tactic. Update: I got downvoted to -4 on this one after getting several upvotes. Makes me think that articbull has multiple accounts and is just gaming the system.
- mattwilsonn888 4y agoNot only have I debated this person multiple times, but on a search about settlement a HN thread came up and he had the top comment citing the infamous Mora et al study which makes the naive assumption that required hash for a proof of work network scales linearly with transaction volume, rather than block volume (which come at a constant rate no matter what the total hash is). This person is a successful troll, and a pathetic thinker.
- arcticbull 4y agoThere's no such thing. That power should be connected to the grid instead of wasted or put to productive use, not to mention all those GPUs that are about to head for the landfill after a long life of guessing random numbers and warming up the outside. Wasting the power for money disincentivizes storage and grid connection.
- captainbland 4y agoYeah if I had to guess, the main concern with very long periods of load is going to involve moving parts rather than anything else. So pretty much the fan is likely to go but not much else.
- deleted 4y ago[deleted]
- Obi_Juan_Kenobi 4y agoThey usually undervolt/clock the GPU, but not the memory. VRAM temps can be an issue and only some miners will try to address that properly with copper shims, etc. The 3090 is notoriously bad for mining because it has memory chips on both sides of the board, leading to more heating in one spot and poor cooling for the 'back side' chip. Other cards tolerate it much better, but it can be an issue. So while overall mining cards should be good, there are some specific issues to watch out for. A failed memory chip is not an easy fix, requiring a reball/replacement of that chip.
- latchkey 4y ago100% accurate. ethash is memory bound. I've definitely seen 'memory go bad'... but at our scale, the percentage failure rate on that is in the single low digits. Additionally, we have cards that run just fine for years on end. Maybe, as you suggest, it is just something that is more card specific.
- NikolaNovak 4y ago>>I think an argument could be made that mined-on cards are more well cared for than those owned by your average gamer. What strikes me though is people are rarely discussing mileage, only nature of work. The video card in my gaming computer works, on average, maybe 1hr/week (some weeks more, most weeks 0). So right out of the gate, my video card has been working basically 168 times less long than any mining card running 24x7. We are talking more than two orders of magnitude difference in "mileage", before we discuss how well or poorly it has been taken care of.
- belval 4y agoMy understanding is that it's similar to a car, changing state (starting/stopping) is much more damaging that running the same thing, at the same temperature/voltage for extended period of time.
- latchkey 4y agoI've rebooted GPUs hundreds of times to find the optimal tuning parameters. Failures after a reboot were very few and long term over the entire collection of GPUs, we've seen very few failures. Definitely within operating parameters.
- LoveMortuus 4y agoMost of the "damage" that happens to a GPU is due to thermal expansion, which happens at to a more extreme degree if you're cold booting a game and then from a hot gaming state back down to cold. Where are with mining it's usually running constantly at a more or less stable temperature, thus it experiences much less of stress from the thermal expansion side of things.
- synapse26 4y agoI fully agree with your point. However, this only applies when miners are buying new cards. I live in Vietnam, crypto mining/usage is pretty big, during the last crypto craze a few months (a year?) ago, all miners are willing to buy old cards, used cards, even broken cards at high price, I sold my 570 for $300. Furthermore, flashing custom mining BIOS, what I’m told is that every miner here has to do or it wouldn’t be profitable, voids warranty.
- lampshades 4y agoNot the same card but five years ago I bought a refurbished GTX 1080 Ti that was previously used for mining. Still running smoothly to this day, no issues whatsoever.
- hydroev 4y agobut the perception is already that gpu used in mining are tough to sell as buyers know most of the GPUs bought in the past few years were most likely to have been used in mining. seeing more and more people just waiting out to buy the newer cards so it seems like the price needs to come down a lot more to convince people to buy a gpu used in mining. just my two cents based on observing reddit threads
- PartiallyTyped 4y agoSame but around 3 years ago. Likely the best purchase I have made.
- nathanvanfleet 4y agoJust wondering if, for a second, you considered that repasting or replacing fans is a large effort for normal folks who just want a video card?
- latchkey 4y agoThis sounds like the perfect opportunity to buy a retail off the shelf card with a warranty! What kind of question is that.
- derefr 4y agoPresumably they bought these cards, took the fans off them, hooked up a custom water-cooling setup, etc.; and when selling them, are taking the pile of fans they shucked and putting them back on the cards with fresh paste.
- latchkey 4y agoWe bought the cards directly from an OEM, with heatsinks on them instead of fans. We use a case based cooling system. ie: an enclosed box with fans. 12 cards in a box. This is lower power, fewer fans (5 instead of 12), and better cooling than putting fans on each card. Also easier to replace a fan on a case than a card. At my scale, water cooling doesn't work and isn't cost efficient. Air is a surprisingly great cooling system.
- Melatonic 4y agoWhat does the actual heatsink look like one the card? Wondering if I can do this on my home system assuming I have good airflow on my case
- latchkey 4y agoIt looks just like a heatsink. Big aluminum bladed block. It might work, I don't know... airflow on the box itself wasn't enough, but there were 12 cards in the box, we also had to have external airflow as well. A single card probably wouldn't be too much of an issue though. That said, we aren't parting out single cards... it would be more like if you wanted to buy 5-10k of them. ;-)
- npteljes 4y agoMy logic would be that these cards are for consumer usage, and mining means 24/7 100% load. So, a year mining would be like 5 years of gaming, and even then you gamed 5 hours a day, every single day! So, mining might not destroy cards, but it's heavy use. I think the used goods buyers' attitude is similar to those in the car market. Never mind the miles, if a car had heavy users, like a pizza company's delivery vehicle, it looks different in the market than a garage-stored family car used to visit the relatives.
- latchkey 4y agoThere is no such thing as 100% load in ETH GPU mining. The bottleneck is the memory controller, not the GPU itself. That's why 5+ year old cards are still more ROI efficient than the latest greatest cards. The only way to speed things up is to speed up the memory. Other algos take advantage of more of the GPU side of things as well. ProgPoW, if it had passed, would have done that. From what I understand, RVN also does as well... and uses more power too.
- hansvm 4y agoCounterpoint, heavy use mostly doesn't apply to solid-state devices (much how the expected lifespan of an incandescent bulb is independent of its previous usage), and to the extent it would matter the effect is probably dwarfed by not being stuck in a gaming PC full of dust and experiencing constant thermal shock as the games ramp up and down. To the pizza car analogy, when I was in that game I put a hard 60k miles/yr on such vehicles, but I also regularly change the oil, keep great tires and brakes on them, replace bushings and other suspension components at the first sign of issue, etc... Partly because driving that many miles makes issues easy to spot due to familiarity and temporal coherence and partly because it is cheaper to fix many such things sooner rather than later after they've jostled something else out of place. Nobody ever asked if it was a pizza car. I listed it as well maintained and got top dollar each time because it was and their inspections showed that to be true.
- vineyardmike 4y agoCounter counter point, chips break down over time even though they’re solid state. The flow of electricity through a chip will slowly degrade the metal traces inside it. At the nanometer scale, it doesn’t take much to ruin a logic gate. This is called electromigration. You can care for that car (or chip) all you want, but chips aren’t cars. It’s a slow process, and may not happen on the timescale of mining, but it happens. https://en.wikipedia.org/wiki/Transistor_aging https://en.wikipedia.org/wiki/Transistor_aging https://en.wikipedia.org/wiki/Time-dependent_gate_oxide_breakdown https://en.wikipedia.org/wiki/Time-dependent_gate_oxide_brea...
- mindw0rk 4y agoIt's not just the thermal paste that goes. There are more parts that are affected by the constant heat. Capacitors in the first place
- thfuran 4y agoYeah, electrolytic capacitors derate due to time under load, exponentialy accelerated by temperature increases.
- Waterluvian 4y agoFWIW: "the paste can be replaced easily" is 100% true for like 1% of GPU consumers. As long as you replace the paste before resale, it's great. Otherwise the buyer might perceive that they have a card that's dead or slowed way down because "mining destroyed it."
- hot_gril 4y agoThe seller can replace the thermal paste first if it's so easy. It's in their interest to fetch higher prices. Not my job. I was just thinking today about many years ago when I test drove a used car and heard whistling from the roof. Saleswoman said it was easy to fix. It must've happened during every test drive and possibly dissuaded some buyers, so why hadn't the dealer already fixed it? I bought the car, and guess what, the whistling wasn't fixable.
- hot_gril 4y agoI believe you out of sheer respect for your auto card tuning project, but in general someone with $1M of a product to sell has a conflict of interest with giving good advice about its quality.
- chungy 4y agoConflict of interest doesn't mean wrong, but is an indicator that one should take the claim dubiously until it can be backed up.
- latchkey 4y agoI have a lot more than $1m (new) of these cards. 6 digits of CARDS, not value. We have zero cards for sale right now. Nobody wants them because they are heat sinks and not fans.
- simias 4y agoYeah I don't really understand this worry about buying cards used for mining. If you're worried about wear I'd still rather take a miner's card than one that was used by a heavy gamer and routinely pushed to the limit. I feel like people dislike cryptominers (IMO reasonably, and for all sorts of reasons) and want to punish them all the way by preventing them from liquidating their stocks of cards, but I don't think it's a good reason to make stuff up. I wouldn't buy a card that I know was used for mining because I'm effectively boycotting miners, not because of some made up technical excuse.
- hot_gril 4y agoI'd not be worried about wear but about whatever meddling was done with the firmware (edit: or hardware). Maybe an experienced miner knows how to easily return it back to stock, but who knows who you're dealing with. Someone else can take the chance. Also, PC gamers are the last group I would expect to successfully boycott something. They'll install some spyware-ridden game launcher just to get a $5 discount on a game, while complaining about it. What discount will they resist for a mined-on GPU? $50? Assuming they even know it was mined on.
- SilverBirch 4y agoThe only problem I have with miners is that I don't understand the economics. My understanding is that air conditioning in data centres is a non-trivial cost. So the question is pretty much a balance of: Is air conditioning so expensive that it's cheaper for miners to blast these cards at high temperatures and accept a failure rate, or is the maths behind (cost * mean time between failures) so high that the miners are actually selling off good used equipment. You could tell me that either of those things dominate, I don't know. But I would want to have atleast an idea of this before I bought a used miners GPU. Having said that, I wouldn't buy a gamer's old GPU.
- sfmike 4y agowhat are you mining these days?