6 ms·
Hitachi Wood Plug Cutter Works Perfectly in Hand Held Drills (2013)
- mauvehaus 4y agoIf you're actually plugging holes with the plugs you make, the other thing to look for is a plug cutter that cuts a slightly tapered plug. The taper ensures that the plug will fill the hole even if it's drilled slightly undersized or (more commonly) slightly oversized. Beware that if you're driving a tapered plug into a hole near the edge of a board, you can split the board. Now you have two problems, as they say. What other use would a plug cutter have besides cutting plugs for filling holes? Cutting cylindrical tenons. For that application, you'd want one that cuts straight-sided plugs. Unless you're cutting tapered mortises too, of course, in which case you want the tapers to match. It turns out that you can also use plug cutters without the center spur in a handheld drill to cut cylindrical tenons if you taper the end of the stick so that the plug cutter rides the taper onto the end of the stick. I wouldn't try this with a cutter with four spurs, but the single spur ones apparently do quite well: https://blog.lostartpress.com/2022/02/24/chairmaking-on-the-cheaper-part-1/ https://blog.lostartpress.com/2022/02/24/chairmaking-on-the-...
- mbrameld 4y agoI don't know if you read it or not but the article also emphasizes that this cutter cuts a tapered plug.
- walterbell 4y agoFor plugs intended as load-bearing screw anchors to replace damaged wood, should they be fastened to the surrounding wood by: 1. friction: tapered snug fit, expanding with screw 2. glue: non-tapered, small cylindrical plug<->hole gap for glue/epoxy 3. both: tapered snug fit + grooves for glue/epoxy
- pigtailgirl 4y ago-- never cared about woodwork till discovering Blacktail Studio on youtube - now all I want to do is make tables - highly recommend - especially if you give zero f's about woodworking -- https://www.youtube.com/c/BlacktailStudio/videos https://www.youtube.com/c/BlacktailStudio/videos
- mcronce 4y agoI had the same experience. If you want to branch out, Tyrell Knifeworks - https://www.youtube.com/c/tyrellknifeworks https://www.youtube.com/c/tyrellknifeworks - gave me a similar experience with knife forging/construction
- enlyth 4y agoWish I had space to do something like this, here in the UK houses are tiny compared to most of the developed world, and having some kind of garage is basically a luxury
- amelius 4y agoOn the bright side: you don't have to keep it clean.
- 542458 4y agoFor what it’s worth - you can have a lot of fun with a small budget wood lathe and not a lot of space. Pens, small bowls and plates, chess pieces… it’s not as spectacular as big slab tables, but it captures the same “show off beautiful figured wood and nice finishes” bit and it’s cheaper and less space intense. If you are really pressed for space, a small lathe is usually small enough that you could carry it outside when you wanted to turn something (you’d need something to clamp it to outside of course). Or you could have a shed setup - that’s pretty common. Some parts of the UK have real turning communities or guilds still, and they may offer courses or use of much nicer lathes there.
- walterbell 4y agoIs there a UK equivalent of shared workspaces or hackerspaces?
- rib3ye 4y agoTry Ishitani Furniture. Similar satisfying flow but without the voiceover. https://youtu.be/x51zMg7roIs https://youtu.be/x51zMg7roIs
- 4y ago
- neogodless 4y agoThe included hyperlink to the product discussed did not work. I suspect it was something like this: https://www.lowes.com/pd/Hitachi-3-8-in-Plug-Cutter/3056069 https://www.lowes.com/pd/Hitachi-3-8-in-Plug-Cutter/3056069 (discontinued) None of these match (have the 4 cutting teeth and the center), they either have two teeth with the center or 4 teeth without. https://www.woodcraft.com/categories/plug-cutters https://www.woodcraft.com/categories/plug-cutters Wonder how these other ones hold up to hand drilling.
- ricardobeat 4y agoThe comments in the post say it’s been discontinued, but I was able to find similar bits by other brands, searching for “self-centering plug cutter”.
- jmuhlich 4y agoI’ve used those Snappy brand cutters in a handheld cordless drill. It’s workable but tricky. You need to start with light pressure and high speed until the cutters score a clean circle, then gradually increase the pressure. The workpiece absolutely needs to be clamped down with zero movement, and it helps if you can find a way to brace your upper body and the drill as you work. The trickiest part is keeping the cutter perfectly square to the work in both axes —- if you tip it too far you’re likely to shatter the cutter as the metal is very brittle.
- kevin_thibedeau 4y agoI've hand drilled hundreds with a non centering plug cutter. It works fine. You make the plugs long anyway so tear out at the beginning isn't an issue. With a tapered cutter the starting surface is going into the hole so it doesn't have to look good either. The main tedium is when they get dull it becomes a bear to force them into the wood.
- scooble 4y agoAt a pinch, drilling a hole the external diameter of the plug cutter and clamping that to the board you are getting the plug out of can act as a guide so the plug cutter doesn’t spiral out and cut a hole in the wooden stairs you are using as an impromptu bench (for example).
- peteradio 4y agoOr the foot acting as an impromptu clamp (for example).
- jagtesh 4y agoLast thing I expected to discover on HN. This is incredibly useful for any DIYer. Thanks OP! Edit: Usually I refrain from thank you posts on HN but I had to make an exception owing to the unique nature of this post.
- walterbell 4y agoHack All The Things! Recent DIY/workshop/garage threads: Rivet nuts, https://news.ycombinator.com/item?id=32235908 https://news.ycombinator.com/item?id=32235908 Making holes without an electric drill, https://news.ycombinator.com/item?id=32124451 https://news.ycombinator.com/item?id=32124451 DIY tool storage + kaizen foam alternatives, https://news.ycombinator.com/item?id=32066503 https://news.ycombinator.com/item?id=32066503 & https://news.ycombinator.com/item?id=32067236 https://news.ycombinator.com/item?id=32067236 Pozidriv + Robertson & Torx screws https://news.ycombinator.com/item?id=31956655 https://news.ycombinator.com/item?id=31956655 & https://news.ycombinator.com/item?id=31958512 https://news.ycombinator.com/item?id=31958512 Mini drill press + X-Y tables, https://news.ycombinator.com/item?id=31875997 https://news.ycombinator.com/item?id=31875997 & https://news.ycombinator.com/item?id=31873273 https://news.ycombinator.com/item?id=31873273
- megraf 4y agoI've made plugs with a hole saw that turned out pretty OK. I drilled out the knot with a hole saw and made the plug by removing the center drill after getting about 20% through the plug board. I used a slightly larger saw for creating the plug and then sanded the difference (after marking the plug with a set of calipers) on a belt sanding jig, which allowed me to essentially turn the plug. The end result wasn't as good as Paul's, but it allowed me to get the job done.
- deleted 4y ago[deleted]
- caned 4y agoJust want to make a plug for Paul Sellers. His YouTube videos on woodworking with handheld tools have kept me captivated for years. Through watching his videos, I learned how to cut mortise and tenon, dovetail, and dado joints without touching a powered tool. A weekend hobbyist woodworker, the pleasure I get from truly crafting by hand is immense. Paul is a heavyweight, and he shares what he knows without holding back.
- itsananderson 4y ago+1 https://www.youtube.com/c/PaulSellersWoodwork https://www.youtube.com/c/PaulSellersWoodwork I started watching his videos about 10 years ago, and while I've shifted a bit toward using more power tools in recent years, I still use his foundational hand tool techniques all the time. He can be a little preachy about his "hand tool only" woodworking philosophy, especially on his blog. If you can overlook that, he has a ton of skill and is good at teaching and demonstrating that skill to others through his videos.
- jameshart 4y ago> Just want to make a plug for Paul Sellers Apparently you can use a Hitachi plug cutter to do that.
- CrankyCanuck 4y agoPlug cutters, especially those that cut a tapered plug are an interesting exercise in patent shenanigans. As mentioned in this thread, a tapered plug is almost always superior than a straight sided one...the wedge action as the plug is driven down results in a very snug fit. Lee Valley Tools has a patented Snug Plug cutter. As you might imagine, it's been ripped off by many manufacturers. Lest you thing a tapered plug was patented...be aware it's not. The tool design itself is. In the case of the Lee Valley cutter, it has 4 "legs" that outline and then shear the sides off the plug. A quick patent search on "tapered plug cutter" will illustrate many designs...all patented, and resulting in a tapered plug. The idea is to copy the result of the product, and not the product itself. I will say the Lee Valley Snug plug cutters work very well. While you can use them hand held, they (like any similar cutter) will function far better in a drill press.
- walterbell 4y agoThe Lee Valley cutters are excellent, but max out around 1/2" depth. Any recommended wood plug cutters for deep (1" - 2") plugs? Are the Lee Valley cutters related to the Fuller ones, https://wlfuller.com/html/plug_cutters.html https://wlfuller.com/html/plug_cutters.html & https://wlfuller.com/html/about.html https://wlfuller.com/html/about.html? > During the late 1950's, Warren Jr. renovated the countersink design -- a change that is extensively used today. Originally the flutes of the countersink were straight in design. In the new model the flutes are slightly slanted. This modified the tool from a scraper to a cutter. The design allowed the wood chips to clear, preventing clogging.
- gorgoiler 4y agoI have a set of Montana plug cutters, also designed for hand drill use: https://www.montanabrandtools.com/collections/plug-cutters/products/3pc-plug-cutters https://www.montanabrandtools.com/collections/plug-cutters/p... A fun game to play, when cutting plugs in bulk, is to see how many you can cut before one breaks off and jams up the cutter. This is a bad thing because you have to break your flow and spend a non zero amount of time chipping the jammed plug out of the mechanism. I can do at least five before it goes wrong and I have to stop and get out a chisel to clear the jaws. Oh, for a drill press!