5 ms·
The damage is actually comparable or lower than normal usage, since they run at a constant temp which is less stressful and tend to be undervolted to get a bett
by moffkalast 4y ago
The damage is actually comparable or lower than normal usage, since they run at a constant temp which is less stressful and tend to be undervolted to get a better hashrate/dollar so the lines shouldn't be eroded much. At least according to that one LinusTechTips test.
- more_corn 4y agoBut they’re put together by amateurs, in non-static safe environments, operated with questionable cooling…
- moffkalast 4y agoSounds like exactly how gamers use them too.
- KennyBlanken 4y agoThere are different problems. Thermal cycling common to gaming uses causes mechanical failures in chips, between chips and the board, and the board - but electrolytic capacitor lifetime drops dramatically as temperature goes up. Not much thermal cycling in desktop systems seeing mostly "productivity" use that have proper ventilation.
- zaptrem 4y agoCapacitors have been massively over-specced for PCs for over a decade now. This was only a potential problem ~<2010 for components like GPUs. Maybe still a problem with really cheap power supplies today, but that's not what we're talking about.
- bsamuels 4y agooptimal running temperatures for gpus during mining is way lower than what most games will pull. memory has to stay as cool as possible or else the overclock will be unstable.
- KennyBlanken 4y agoIt's still 24x7 operation vs a few hours here and there. Even a pretty hardcore daily gamer probably only clocks half a dozen hours a day if they're working a day job.
- fsckboy 4y agobut it's the turning on and off or heating cooling under changing loads that causes the stress, not the constant running
- xxs 4y agoThe GPU core doesn't get stressed much, of course. Memory, however, is another issue - rtx3090 being an absolute disaster (effectively cooling on half of the memory). HBM cards are likely in a similar boat. The (large) GPU mining operations run at rather high ambient.
- diamondlovesyou 4y agoHBM GPUs are better off because the memory cores are in the same package as the compute cores. So they get the same amount of cooling love as the compute cores enjoy. At least in theory.
- timpattinson 4y agoAMD HBM GPUs, the only ones that a PC gamer would buy, are known to suffer from issues with the HBM due to thermal cycling issues
- Dylan16807 4y agoA mining GPU will not experience thermal cycling.
- simonebrunozzi 4y agoExactly. Memory would be the main issue.
- ineedasername 4y agoI don't know anything about component wear patterns, so a question: would a peak constant temp cause less wear than moderate fluctuations? (And is it fast heating/cooling cycles that cause physical stress or is it some other mechanism of action that causes the wear?)
- thepasswordis 4y agoPhysical stress of constantly expanding and contracting.
- MonkeyClub 4y agoHaven't been an EE for a couple of lifetimes now, but iirc yes - best to constantly run (within normal operating limits), rather than run and stop and restart. That holds (? used to hold?) true from anything to GPUs to individual capacitors, the repetition of the heat cool cycles is the primary cause of wear.
- parineum 4y agoHolds true for a lot of electrical appliances, even lightbulbs. They always blow when you switch the lights on. I'm not sure whether constant running is worse for wear and tear vs power cycling but power cycling is typically what precedes a failure.
- dhzhzjsbevs 4y ago> They always blow when you switch the lights on. This isn't true at all.
- beebeepka 4y agoI've never had one fail in a different manner. Modern LED bulbs seem to fail differently. I see lots of power delivery issues before they go
- 4y ago
- fortran77 4y agoI really wouldn't trust them to have been run with adequate cooling, or to not have been run at higher clockrates, etc.
- tehbeard 4y agoIve seen some posts/tweets that There are cards exiting the crypto market where failed ram chips on them have just been yanked off the board, as crypto just needs cores not lots of vram, i wouldn't trust it unless very, very cheap to lower my risk.
- torginus 4y agoYeah, I don't necessarily agree. I assume many miners didn't run these cards in temperature controlled server rooms, but in places like abandoned warehouses in south-east Asia, with high ambient temps and humidity, which can destroy electrical components. And even if they did, the capacitors in the VRMs of these cards are full of electrolytic capacitors which do degrade over time due to heat and chemical reactions occurring between the plates and the electrolyte as well as the evaporation of electrolyte, they not only age, but age faster over time as the degraded capacitors are put under increased stress. Besides, the assumption of running these cards underclocked and undervolted might not be true - if the folks running those obtained the electricity illegally, or incredibly cheaply, it might make more sense to run these cards hotter. Everything considered, these second hand GPUs are not even that cheap, I saw 5700 XTs going for $250 on ebay, with a comparable brand new 6600 costing about $300. Edit: The fans also have suffered serious wear and tear and are likely to fail. Considering these are often custom, you might not even be able to replace them.
- PeterStuer 4y agoThermal cycling such as is typical in a gaming PC is far more damaging than constant temperatures. Underclock/volting cards to get a consistent higher net yield is standard practice in crypto mining, just as ovectclicking/volting is standard practice in enthusiast gamer circles. The latter being way more damaging for the GPU. Those that obtain the electricity illegally, or incredibly cheaply would not be the ones selling cards now. As for fans, the things that reduce the fan's lifetime the most is dust buildup and high positive pressure configurations. Both of these are typical for bedroom gamer setups. Miner cards run in cleaner environments and open frames. I would definetly buy a GPU from a miner over one from a gamer.
- andrekandre 4y ago> Thermal cycling such as is typical in a gaming PC is far more damaging than constant temperatures. the reasoning is probably pretty obvious, but what i heard is the constant expansion and contraction from heating and cooling the chips and connections is what causes the damage im those cases