5 ms·

It's interesting that all the accounts reported by Tesla indicate that ..."the accelerator pedal was abruptly increased to 100%.” How likely is it that, even i

It's interesting that all the accounts reported by Tesla indicate that ..."the accelerator pedal was abruptly increased to 100%.” How likely is it that, even if by accident, the driver would fully depress the accelerator pedal? How many people fully depress the brake pedal when stopping? Usually while parking, there is no need to fully depress the brake because sufficient braking action is achieved with less pressure, and the car will come to a stop gradually instead of abruptly. Maybe they have a CAN bus problem, or a software problem that they do not want to reveal.

potatochup 4y ago
The brake pedal is physically connected to a hydraulic cylinder. You need to be very strong to fully engage the brake pedal, such that many vehicles, when presented with a sharp brake pedal stab, will electronically increase the amount of brake pressure given (because the system assumes you want to stop, but the driver may not be strong enough/have the right feeling for where maximum pedal application is). If you did this at speed, you'd probably engage ABS which tends to mess with the force-feedback though. On the other hand, the accelerator pedal is just a sensor, it doesn't require as much force to fully depress. I'd estimate the force required to fully depress the accelerator pedal to be 1/3 of the brake pedal.
- anonymousiam 4y ago
  It is my understanding that Teslas have regenerative braking. Are you sure that the brake pedal is physically connected to a hydraulic cylinder?
  - Xorlev 4y ago
    Regen braking works by letting off the accelerator, not by pressing the brake.
    - vel0city 4y ago
      Yes and no. A lot of EVs can do two different modes, where it "coasts" and mostly only starts the regen through the brake pedal. You're right though, from what I understand Tesla kind of forces the single-pedal driving mode.
      - frosted-flakes 4y ago
        You can't disable one-pedal driving? No wonder I see so many people in Teslas randomly flashing their brake lights on the freeway.
        jliptzin 4y ago
        You can
        vel0city 4y ago
        Eh, from what I understand Tesla has made a number of changes to the configurability to regen. I don't drive a Tesla so I'm not entirely sure what that means in terms of single pedal and the overall driving feel. https://teslamotorsclub.com/tmc/threads/21-myp-how-to-turn-off-regen-braking.224689/ https://teslamotorsclub.com/tmc/threads/21-myp-how-to-turn-o...
      - Xorlev 4y ago
        The parent comment specifically asked about a Tesla.
  - donthellbanme 4y ago
  - potatochup 4y ago
    Yes. Regen is only capable of what the battery can take in, which is limited at high SoC or cold temps. E.g. see https://electrek.co/2022/05/25/tesla-updates-car-software-regular-brakes-regenerative-limited/ https://electrek.co/2022/05/25/tesla-updates-car-software-re... You still need friction brakes for everything else, which in Teslas (and most other cars) are hydraulically actuated.
- gcheong 4y ago
  But if it's just a sensor, couldn't it be possible that sensor generates an erroneous signal such that it tells the car to accelerate when nobody actually pressed it?
  - AlotOfReading 4y ago
    Acceleration pedal sensors are ASIL D and by ISO 26262 should have a probability of failure per operational hour of <10^-8. So yes, but it should be incredibly unlikely for sensor failures to occur and there's a very thick document somewhere inside Tesla detailing all the considered failure modes and how they've addressed them.
  - frosted-flakes 4y ago
    I believe the pedal sensor has two totally redundant position sensors. If one fails or if they disagree, the car will go into limp mode and turn on the MIL. Maybe not all of them are like that, but I remember AvE (the YouTube channel) having to replace the pedal sensor on one of his cars a number of years ago and he talked about how they worked.
    - jfim 4y ago
      For those as confused as I was, MIL in this context is malfunction indicator light, not mother in law.
- themitigating 4y ago
  Tesla is brake by wire and most of them use electric brakes (I'm not talking about regen)
  - potatochup 4y ago
    To most people, brake-by-wire means totally electronic control. Tesla's current models are only electronically assisted (in that there is an electrically powered hydraulic pump). There is still a physical connection between the brake pedal and the master cylinder. This means you are still available to provide some braking force if you loose 12v entirely. See https://www.evcreate.nl/wiring-the-tesla-ibooster/ https://www.evcreate.nl/wiring-the-tesla-ibooster/ as an example
    - bumby 4y ago
      I was worried about the idea of a fully electric braking system because of the failure mode you mentioned. It looks like hydraulic brakes are not ubiquitous. "Some Tesla vehicles use hydraulic brakes, but not all. Recently, Tesla has equipped its cars with a full self-driving system. Tesla’s latest car comes with full-electric Brembo brakes. These brakes use electric actuators instead of hydraulic fluid pressure to actuate."[1] I'd be curious what mitigations they put in place regarding an electrical system failure. [1] https://www.mech4cars.com/tesla-model-s-braking-systems-all-you-need-to-know/ https://www.mech4cars.com/tesla-model-s-braking-systems-all-...
      - throwthroyaboat 4y ago
        The mech4cars.com article is conflating the service brakes and the parking brake. The service brakes (the primary, foot-pedal actuated brakes) in a Tesla are hydraulic. The mech4cars.com article uses a link to [1] as evidence for the "electric brake system", but this is the _parking_ brake (which is indeed an electric motor, but is an entirely different system, separate caliper, etc). The parking brake will remain engaged even if you lose 12V, so you won't roll away if power cuts out (which you'll know if you've ever tried to tow a Tesla that went totally dead while parked). An electronic park brake is a setup seen in many modern cars. [1] https://teknisimobil.com/mobil-listrik/penjelasan-komponen-electric-park-brake-tesla-model-s-4696/ https://teknisimobil.com/mobil-listrik/penjelasan-komponen-e...
IshKebab 4y ago
I'd say it's quite likely that people would fully depress the accelerator when they meant to fully depress the brake. Especially with cars with cruise control where your foot might not already be on a pedal. I don't think you need to reach for any more conspiratorial explanations when there's a blindingly obvious one available. It would be interesting to see the data just before - were any pedals pressed?
- glitchcrab 4y ago
  Fully depressing the brake pedal would involve some fairly serious reason - you only ever do it in an emergency situation as it produces a very sudden stop. It's therefore highly unlikely then that someone would accidentally fully depress the accelerator because they mistook it for the brake pedal.
  - IshKebab 4y ago
    The car accelerating without you wanting it to doesn't sound like an emergency to you? People aren't robots.
GuB-42 4y ago
Probably unrelated but if you have a manual gearbox, with a clutch pedal, when you are about to stop, you disengage the clutch to prevent the engine from stalling. Clutch pedals are operated with the left foot and meant to be fully depressed. If you are used to drive stick and switch to auto, you may accidentally hit the break hard with your left foot, as if it was the clutch. So if you see someone breaking hard at the red light for no reason, especially if it is a rental car just out of the airport, it is probably the reason. I did it, Most of my (European) friends who rented a car in the US did it too.
bdamm 4y ago
The accelerator is actually two sensors, each independently sampling the pedal position. So, yes, not that likely that both fail simultaneously. In fact, the pedal is not even a Tesla part.
sokoloff 4y ago
Or maybe someone is intending to put a boot full of force onto the brake pedal, hits the gas pedal with that same amount of force, which mats it to 100%?
arn 4y ago
FWIW, I've done this once in my Tesla. Fortunately nothing was immediately in front of me at the time, and I was able to correct quick enough. Here's how the logic goes: - Press brake. - Car moves forward. - Press brake much harder. - Car lurches forward. - Realize you are pressing the wrong pedal.

potatochup 4y ago

The brake pedal is physically connected to a hydraulic cylinder. You need to be very strong to fully engage the brake pedal, such that many vehicles, when presented with a sharp brake pedal stab, will electronically increase the amount of brake pressure given (because the system assumes you want to stop, but the driver may not be strong enough/have the right feeling for where maximum pedal application is). If you did this at speed, you'd probably engage ABS which tends to mess with the force-feedback though. On the other hand, the accelerator pedal is just a sensor, it doesn't require as much force to fully depress. I'd estimate the force required to fully depress the accelerator pedal to be 1/3 of the brake pedal.

anonymousiam 4y ago
It is my understanding that Teslas have regenerative braking. Are you sure that the brake pedal is physically connected to a hydraulic cylinder?
- Xorlev 4y ago
  Regen braking works by letting off the accelerator, not by pressing the brake.
  - vel0city 4y ago
    Yes and no. A lot of EVs can do two different modes, where it "coasts" and mostly only starts the regen through the brake pedal. You're right though, from what I understand Tesla kind of forces the single-pedal driving mode.
    - frosted-flakes 4y ago
      You can't disable one-pedal driving? No wonder I see so many people in Teslas randomly flashing their brake lights on the freeway.
      - jliptzin 4y ago
        You can
        vel0city 4y ago
        Eh, from what I understand Tesla has made a number of changes to the configurability to regen. I don't drive a Tesla so I'm not entirely sure what that means in terms of single pedal and the overall driving feel. https://teslamotorsclub.com/tmc/threads/21-myp-how-to-turn-off-regen-braking.224689/ https://teslamotorsclub.com/tmc/threads/21-myp-how-to-turn-o...
    - Xorlev 4y ago
      The parent comment specifically asked about a Tesla.
- donthellbanme 4y ago
- potatochup 4y ago
  Yes. Regen is only capable of what the battery can take in, which is limited at high SoC or cold temps. E.g. see https://electrek.co/2022/05/25/tesla-updates-car-software-regular-brakes-regenerative-limited/ https://electrek.co/2022/05/25/tesla-updates-car-software-re... You still need friction brakes for everything else, which in Teslas (and most other cars) are hydraulically actuated.
gcheong 4y ago
But if it's just a sensor, couldn't it be possible that sensor generates an erroneous signal such that it tells the car to accelerate when nobody actually pressed it?
- AlotOfReading 4y ago
  Acceleration pedal sensors are ASIL D and by ISO 26262 should have a probability of failure per operational hour of <10^-8. So yes, but it should be incredibly unlikely for sensor failures to occur and there's a very thick document somewhere inside Tesla detailing all the considered failure modes and how they've addressed them.
- frosted-flakes 4y ago
  I believe the pedal sensor has two totally redundant position sensors. If one fails or if they disagree, the car will go into limp mode and turn on the MIL. Maybe not all of them are like that, but I remember AvE (the YouTube channel) having to replace the pedal sensor on one of his cars a number of years ago and he talked about how they worked.
  - jfim 4y ago
    For those as confused as I was, MIL in this context is malfunction indicator light, not mother in law.
themitigating 4y ago
Tesla is brake by wire and most of them use electric brakes (I'm not talking about regen)
- potatochup 4y ago
  To most people, brake-by-wire means totally electronic control. Tesla's current models are only electronically assisted (in that there is an electrically powered hydraulic pump). There is still a physical connection between the brake pedal and the master cylinder. This means you are still available to provide some braking force if you loose 12v entirely. See https://www.evcreate.nl/wiring-the-tesla-ibooster/ https://www.evcreate.nl/wiring-the-tesla-ibooster/ as an example
  - bumby 4y ago
    I was worried about the idea of a fully electric braking system because of the failure mode you mentioned. It looks like hydraulic brakes are not ubiquitous. "Some Tesla vehicles use hydraulic brakes, but not all. Recently, Tesla has equipped its cars with a full self-driving system. Tesla’s latest car comes with full-electric Brembo brakes. These brakes use electric actuators instead of hydraulic fluid pressure to actuate."[1] I'd be curious what mitigations they put in place regarding an electrical system failure. [1] https://www.mech4cars.com/tesla-model-s-braking-systems-all-you-need-to-know/ https://www.mech4cars.com/tesla-model-s-braking-systems-all-...
    - throwthroyaboat 4y ago
      The mech4cars.com article is conflating the service brakes and the parking brake. The service brakes (the primary, foot-pedal actuated brakes) in a Tesla are hydraulic. The mech4cars.com article uses a link to [1] as evidence for the "electric brake system", but this is the _parking_ brake (which is indeed an electric motor, but is an entirely different system, separate caliper, etc). The parking brake will remain engaged even if you lose 12V, so you won't roll away if power cuts out (which you'll know if you've ever tried to tow a Tesla that went totally dead while parked). An electronic park brake is a setup seen in many modern cars. [1] https://teknisimobil.com/mobil-listrik/penjelasan-komponen-electric-park-brake-tesla-model-s-4696/ https://teknisimobil.com/mobil-listrik/penjelasan-komponen-e...

IshKebab 4y ago

I'd say it's quite likely that people would fully depress the accelerator when they meant to fully depress the brake. Especially with cars with cruise control where your foot might not already be on a pedal. I don't think you need to reach for any more conspiratorial explanations when there's a blindingly obvious one available. It would be interesting to see the data just before - were any pedals pressed?

glitchcrab 4y ago
Fully depressing the brake pedal would involve some fairly serious reason - you only ever do it in an emergency situation as it produces a very sudden stop. It's therefore highly unlikely then that someone would accidentally fully depress the accelerator because they mistook it for the brake pedal.
- IshKebab 4y ago
  The car accelerating without you wanting it to doesn't sound like an emergency to you? People aren't robots.

GuB-42 4y ago

Probably unrelated but if you have a manual gearbox, with a clutch pedal, when you are about to stop, you disengage the clutch to prevent the engine from stalling. Clutch pedals are operated with the left foot and meant to be fully depressed. If you are used to drive stick and switch to auto, you may accidentally hit the break hard with your left foot, as if it was the clutch. So if you see someone breaking hard at the red light for no reason, especially if it is a rental car just out of the airport, it is probably the reason. I did it, Most of my (European) friends who rented a car in the US did it too.

bdamm 4y ago

The accelerator is actually two sensors, each independently sampling the pedal position. So, yes, not that likely that both fail simultaneously. In fact, the pedal is not even a Tesla part.

sokoloff 4y ago

Or maybe someone is intending to put a boot full of force onto the brake pedal, hits the gas pedal with that same amount of force, which mats it to 100%?

arn 4y ago

FWIW, I've done this once in my Tesla. Fortunately nothing was immediately in front of me at the time, and I was able to correct quick enough. Here's how the logic goes: - Press brake. - Car moves forward. - Press brake much harder. - Car lurches forward. - Realize you are pressing the wrong pedal.