5 ms·
Update: this is incorrect. The cone becomes very hot stream of molten copper. It melts through the steel plate, much like a jet of hot water melts through a bl
by nine_k 5y ago
Update: this is incorrect.
The cone becomes very hot stream of molten copper. It melts through the steel plate, much like a jet of hot water melts through a block of ice.
This happens fast enough that much heat does not have the time to escape from the impact site, despite high thermal conductivity of metals. The high pressure created by the explosion keeps the jet compressed from sides, too, so it does not fragment easily.
Various kinds of "active armor" trigger the munition by a thinner layer of metal well ahead of the real thick armor plate, then produce counter-explosions to break the jet.
- raldi 5y agoThe video specifically says it’s not molten.
- causality0 5y agoIt's not actually liquid, it only behaves like one on impact due to the magnitude of the forces. It's more accurate to say it erodes through the armor instead of melting.
- Vladimof 5y ago> much like a jet of hot water melts through a block of ice cold water can cut through steel also...https://www.youtube.com/watch?v=v0NVOThRooE https://www.youtube.com/watch?v=v0NVOThRooE
- Nextgrid 5y agoWaterjet cutting uses water to propel a powder which acts as an abrasive, like an infinite stream of sandpaper. I don't think water by itself will achieve much.
- Vladimof 5y agoyou learn something new everyday
- climb_stealth 5y agoHuh, thanks for mentioning this! I always thought it was just water with enough pressure. It looks like pressure cutting with pure water exists but it is limited to softer materials. This page [0] has a fair bit of detail on it all. [0] https://www.machinemfg.com/waterjet-cutting-guide/#Classification_of_waterjet https://www.machinemfg.com/waterjet-cutting-guide/#Classific...
- daenz 5y agoSounds like pressure washing vs sand blasting. Only difference between the two (aside from drastically different effect) is sand blasting has an intake tube to suck sand into the water jet.
- fortran77 5y agoPeople have made DIY waterjet cutters with pressure washers and a sand feeder: https://www.youtube.com/watch?v=Lg__B6Ca3jc https://www.youtube.com/watch?v=Lg__B6Ca3jc
- nullc 5y agoWaterjeting without abrasive is a thing, it's used for soft materials like rubber... and there are some companies marking higher pressure approaches for metal (though usually with tiny amounts of abrasive rather than none at all).
- gonzo 5y agoIt’s also used in commercial food prep.
- walnutclosefarm 5y agoWater is not doing the cutting there. Water is just the carrier for garnet abrasive, which does the actual cutting. Garnet is roughly three times harder than steel, so at high pressure cuts it very effectively.
- postalrat 5y agoMaybe that's what happens but the video explains it as a stream of copper (not molten?) that pushes the steel out of the way.
- WhitneyLand 5y agoIt’s not molten, and heat plays no role in the penetration ability. This is a very common misconception. It’s simply focused kinetic energy that does it. The cone focuses the copper into a slug like object, and the slug becomes similar to an extremely powerful bullet.
- Brian_K_White 5y agoSo it's like that old picture of the grass straw driven through the telephone pole by nothing but hurricane wind? The flimsy straw could do it simply because of how fast it was moving. The strength of the straw doesn't matter, simply it's mass, moving that fast, carries itself through, ie the leading edge is not being pushed from behind like a nail, more like a bullet with a string attached? Setting aside the simplification, that probably the mass of the rest of the straw does play some part not absolutely zero, is that a reasonable way to conceptualize it?
- chemeril 5y agoYes, that's reasonable. By the time the jet hits the target the explosive provides no motive force whatsoever: it's purely a momentum game.
- foucalt-apathy 5y agoAre you certain that a hurricane can blow a straw through a telephone pole? I hadn't heard of this phenomenon and was interested. I was unable to find a good source. According to this article, the National Oceanic and Atmospheric Association thinks it's not possible: https://www.livescience.com/39270-tornado-straw-into-tree-wood.html https://www.livescience.com/39270-tornado-straw-into-tree-wo... (Alternative explanation in the article: the tree twists during the hurricane, cracks temporarily open, and debris gets stuck in the cracks.)
- Brian_K_White 5y agoThe picture (perhaps multiple but at least one) was a piece of hay poked right through a telephone pole, in the aftermath of some kind of storm. Not a tree. It was shown in grade school in the 80s or late 70s.
- GartzenDeHaes 5y agoA plasma technically. And it doesn't exactly penetrate, it pushes the steel atoms aside very literally like sticking your finger in butter. Edit: obviously it penetrates, but not in the way that you would expect.
- chemeril 5y agoCertainly not a plasma. It's a coherent spear of hydrodynamic copper, not a bunch of charged ions floating around.
- GartzenDeHaes 5y agoAs far as I know, it could be little qanons in there stealing the steel atoms to build jfk jr's moon rocket. However, the principle physicist for the nuclear emergency search team described it using the butter analogy.