4 ms·

I love electronics and electrical engineering in general. But this article explains perfectly why it is less accessible than software engineering - the former r

I love electronics and electrical engineering in general. But this article explains perfectly why it is less accessible than software engineering - the former requires a individual components, soldering iron(s), a digital oscilloscope, etc. while all you need is access to a computer with internet for the latter.

kken 5y ago
I think it has never been easier to enter electronics (especially embedded stuff) than it is now. You can get a starter set including RPI/Arduino/Breakboard/Components for less than $100. Also, with a breadboard no soldering iron is needed. Try chemistry, mining, process engineering or even mechanical engineering in comparison?
- spookthesunset 5y ago
  Totally agree. Electronics has never been easier thanks to low-cost microcontrollers like the ESP32. Most of the "electronics" you'll be doing is simply plumbing--connecting the GPIO outputs of your microcontroller to whatever peripherals you want to support. It's a good gateway into the wider world of electronics.
  - jcun4128 5y ago
    I am curious what the next thing up is that is more "legit". At this time I've used Arduino/ESP/Teensy. I bought an STM32 and Beaglebone but wondering what does something like a Boston Dynamics dog use? Probably a full on processor like i7. Edit: oh it uses i5 with Ubuntu ha, plus separate graphics for the AI part
- buescher 5y ago
  Chemistry takes some initiative these days, but the dark age after the golden age of chemistry sets is pretty much over. Mining, I dunno, buy a shovel? Hobby prospecting - sluicing and panning for gold, mostly - was still a thing in the rural west when I was a kid. I'd bet you could find a forum or something if you searched. Process engineering, I don't know what you'd want to do as a hobbyist. Mechanical engineering - 3d printers and chinese machine tools are affordable. It's never been easier to buy small parts and fasteners. The free finite element simulation packages are getting pretty good.
  - jcun4128 5y ago
    Made me think of Cody's lab guy's sweeping some dirt from a highway and pulling palladium out.
- gus_massa 5y ago
  We bought one of this kit for our daughter when she was ~10 year old. It has a the explanation of a few projects and the components to put in the breakboard. She liked it, and we bought some additional components, like a 7 segment display and leds of additional colors.
- solarkraft 5y ago
  It's wonderfully easy to enter advanced electronics nowadays, but has accessibility really kept up with the rate of advancement (electronics getting smaller and more complicated)?
xxs 5y ago
>why it is less accessible than software engineering Having experience in both, and started at rather young age (pre-teens both) - the hurdle is the "magic smoke" (that all electronics devices work with). Mistakes are very punishable with components and power supplies blowing up, while software mistake are extremely forgiving... unless you work on an 8bit 6502 that doesn't have properly implemented RST signal and cold restarts the entire machine instead, wiping off its memory, on top of lacking any permanent storage. Mistake and learning electronics costs resources and time each time, and it's a lot more frustrating. Also bread boards (nowadays) don't really need a soldering iron.
123pie123 5y ago
you can always play around with the simulators https://falstad.com/circuit/ https://falstad.com/circuit/
- wyager 5y ago
  As someone who tried to use falstad, spice, etc to learn as a kid, simulators never really worked for me pedagogically. I was only able to learn by using physical devices. Nothing really beats a breadboard for immediate feedback (whether reward or punishment).

kken 5y ago

I think it has never been easier to enter electronics (especially embedded stuff) than it is now. You can get a starter set including RPI/Arduino/Breakboard/Components for less than $100. Also, with a breadboard no soldering iron is needed. Try chemistry, mining, process engineering or even mechanical engineering in comparison?

spookthesunset 5y ago
Totally agree. Electronics has never been easier thanks to low-cost microcontrollers like the ESP32. Most of the "electronics" you'll be doing is simply plumbing--connecting the GPIO outputs of your microcontroller to whatever peripherals you want to support. It's a good gateway into the wider world of electronics.
- jcun4128 5y ago
  I am curious what the next thing up is that is more "legit". At this time I've used Arduino/ESP/Teensy. I bought an STM32 and Beaglebone but wondering what does something like a Boston Dynamics dog use? Probably a full on processor like i7. Edit: oh it uses i5 with Ubuntu ha, plus separate graphics for the AI part
buescher 5y ago
Chemistry takes some initiative these days, but the dark age after the golden age of chemistry sets is pretty much over. Mining, I dunno, buy a shovel? Hobby prospecting - sluicing and panning for gold, mostly - was still a thing in the rural west when I was a kid. I'd bet you could find a forum or something if you searched. Process engineering, I don't know what you'd want to do as a hobbyist. Mechanical engineering - 3d printers and chinese machine tools are affordable. It's never been easier to buy small parts and fasteners. The free finite element simulation packages are getting pretty good.
- jcun4128 5y ago
  Made me think of Cody's lab guy's sweeping some dirt from a highway and pulling palladium out.
gus_massa 5y ago
We bought one of this kit for our daughter when she was ~10 year old. It has a the explanation of a few projects and the components to put in the breakboard. She liked it, and we bought some additional components, like a 7 segment display and leds of additional colors.
solarkraft 5y ago
It's wonderfully easy to enter advanced electronics nowadays, but has accessibility really kept up with the rate of advancement (electronics getting smaller and more complicated)?

xxs 5y ago

>why it is less accessible than software engineering Having experience in both, and started at rather young age (pre-teens both) - the hurdle is the "magic smoke" (that all electronics devices work with). Mistakes are very punishable with components and power supplies blowing up, while software mistake are extremely forgiving... unless you work on an 8bit 6502 that doesn't have properly implemented RST signal and cold restarts the entire machine instead, wiping off its memory, on top of lacking any permanent storage. Mistake and learning electronics costs resources and time each time, and it's a lot more frustrating. Also bread boards (nowadays) don't really need a soldering iron.

123pie123 5y ago

you can always play around with the simulators https://falstad.com/circuit/ https://falstad.com/circuit/

wyager 5y ago
As someone who tried to use falstad, spice, etc to learn as a kid, simulators never really worked for me pedagogically. I was only able to learn by using physical devices. Nothing really beats a breadboard for immediate feedback (whether reward or punishment).