4 ms·
I think that there could be a lot of innovation in the field of data diodes. Allowing data to exit a network at speed, while allowing zero infiltration of contr
by mikewarot 5y ago
I think that there could be a lot of innovation in the field of data diodes. Allowing data to exit a network at speed, while allowing zero infiltration of control, is a very powerful tool for monitoring, and backups.
I believe that a very large array of 4x4 bit lookup tables, clocked like checker boards, could be the key to scaling past the Von Neuman architecture. There are numerous advantages in terms of provability, scalability, security, hardware fault tolerance, and compilation.
The design space for small 5 axis machine tools hasn't been completely explored. Imagine a set of 6 actuators, and a spindle, which can be bolted onto something large that needs to be machined, like the portable milling machines used for key seating, etc. The legs are in pairs, forming the classic 3 point support used to lift flight simulators, etc... and your spindle sits between them. Equip it with a standard R8 or similar collet, and a probe. You could then put a 1-2-3 block on the object to be machined, and probe it to calibrate the axis.
I believe that it is possible to manufacture a custom silicon chip using wet electrochemistry in quantity one. Piezoelectric transducers could be used to move a probe to do etching or deposition of material. Aluminum vias would have to be replaced with copper.
- sitkack 5y agoWrt using a lattice for data flow and exploring nonvon architectures you should check out Dave Ackley [1] I like the idea of composing Stewart Platforms, they really show the power and versatility of linear actuation. Could you talk more about using wet electrochemistry for fabrication? [1] https://www.cs.unm.edu/~ackley/ https://www.cs.unm.edu/~ackley/ [2] https://en.wikipedia.org/wiki/Stewart_platform https://en.wikipedia.org/wiki/Stewart_platform
- mikewarot 5y agoElectrochemical etching can be used to selectively remove material, and if a very small probe were used, perhaps it's possible to directly etch a channel where required to make a transistor, or to apply a voltage gradient to help cause a layer of silicon dioxide to form where insulator is required.
- sitkack 5y agoSounds like it might be another technique to use with the epitaxial process.