9 ms·
PineNote Developer Edition – E-Paper Tablet
- kayodelycaon 5y agoOne more step towards a truly open eInk tablet! :D Please note: - Purchase is restricted to people who have signed up to be developers. - This is a hardware prototype with no drivers or operating system. - You are expected to install an operating system yourself and write the drivers needed to make the device work.
- 41209 5y agoHow exactly does it boot. If you do something really stupid and somehow fry your SD card in your Raspberry Pi, that's fine because you can always pop in another SD card. I wouldn't want to accidentally burn out the internal storage on this tablet and have no way to replace it.
- ocdtrekkie 5y ago> Currently, the only ways to flash software are from the factory Android installation (UART shell, adb, or fastboot) or by using rkdeveloptool https://wiki.pine64.org/wiki/PineNote_Development https://wiki.pine64.org/wiki/PineNote_Development
- nousermane 5y agoProcedure for "entering maskrom mode", from the link above, is so cool! Reads like some magic ritual: > Flip the device around so that the display faces down > Lay the pen on the right side, with its tip pointing towards the speaker grill, and its magnet pointing towards the upper right corner of the label on the back. > Turn the device on (...)
- lnanek2 5y agoThe old cylindrical mac pros had a similar trick where the case had a magnet in it and the computer itself had a detector for it. So if you ever wanted to turn it on without the case to see the diagnostic lights, you had to know where to put a magnet to fool the sensor.
- ocdtrekkie 5y agoThis is an exceptionally overpriced way to do it: Dell PCs tend to just have a little push switch that's depressed when the case side panel is on. (For a corporate environment, these are also very helpful for tamper protection, of course.)
- renzo88 5y agoThe key difference is that apple cares what their computers look like when they're open. Dell doesn't. An ugly switch would ruin the line of the Mac's case and look out of place. Now, you may disagree with that philosophy, but Apple is wildly successful for it. Personally, I don't like Macs anymore, but I do absolutely respect that attitude.
- foxfluff 5y agoI think removing the side panel would ruin your Mac's look more than a hidden switch behind the side panel does.
- renzo88 5y agoApple believes that even when the computer is open, it should look good. Thin Steve loved joking that the back and insides of his computers looked better than the front of the competitors.
- deleted 5y ago[deleted]
- 1-6 5y ago"Most of the device’s functionality, including the e-paper display, do not work at this time."
- throwaway81523 5y ago> One more step towards a truly open eInk tablet! :D What about Inkplate? No one ever mentions that.
- gedy 5y agoI have an Inkplate but it's really more a programmable display, and not tablet-like hardware/features like this.
- throwaway81523 5y agoAh thanks, I will check into it more carefully. I've been wanting one and maybe it can suffice without being a full featured tablet.
- techietim 5y agoThere is no real point in posting this now: you needed to sign up as a developer back in September in order to purchase this: > Developers will need to use a coupon code to complete the purchase.
- CameronNemo 5y agoPerhaps this page would be better to post: https://wiki.pine64.org/wiki/RK3566_EBC_Reverse-Engineering https://wiki.pine64.org/wiki/RK3566_EBC_Reverse-Engineering Of course there has been no progress on reverse engineering the epaper display driver in the past three months. Furthermore it is questionable why anyone would need to RE it, considering that the driver is in-kernel. The assembly file that rockchip shipped with their sdk seems like a GPL violation to me.
- the_biot 5y agoGood point. That page says the BSP ships with a GCC-produced driver blob, without source. Would be good to hear from the Pine64 folks on whether they've contacted the vendor and demanded source.
- rbanffy 5y agoMaybe asking politely and offering help would work better. It’s entirely possible the blob was never cleared for release as source. In the distant past I was hired to provide programs in binary form and many clients refused to pay more for source.
- CameronNemo 5y agoOr, you can just avoid vendors who make you beg for open source drivers.
- rbanffy 5y agoHow many competitive ARM SoC vendors that have good software higiene out there?
- kylecazar 5y agoLittle confused. So eventually the PineNote will come with a custom Linux distro for end-users, I presume, that works out of the box with the hardware. But what are devs at this point supposed to flash, any flavor of mobile Linux?
- the_biot 5y agoI think this is intended for kernel driver developers, not user application developers.
- foxfluff 5y agoYou flash whatever you want to develop.
- powersnail 5y agoAt this point, whoever buy the device are the ones who figure out what is supposed to be flashed. That's basically how Pine64 works: they make the hardware, and let the community work on the software, including the OS and drivers. It worked decently for phones, albeit slow, the software seems to be coming along gradually.
- rjsw 5y agoThe PineNote is very close to the design of the Quartz64, there is a Linux BSP for that, you would flash a Quartz64 distribution and use a serial console.
- breakfastduck 5y agoI totally get releasing products like this to a 'developer audience' when its not fully working / complete but charging that much for it in that state... What a joke. You can get a remarkable 2 for less than the cost of this device when "Most of the device’s functionality, including the e-paper display, do not work at this time".
- sporedro 5y agoYa I’m a little confused, why is this thing $400 for something that doesn’t even work? Is the target audience developers who want to develop drivers and stuff for this? If so shouldn’t it be as cheap as possible? I don’t see the point in trying to make money at this stage when your target is people interested in a non functional product.
- metabagel 5y ago“at this stage” There is no indication they will ever leave this stage. I believe they generally sell at cost, even for working products. The purpose is to advance the technology, not to make a profit. But, the manufacturing and NRE costs need to be paid somehow.
- officeplant 5y agoPeople seem to get really upset when its pointed out that they (Allwinner & Rockchip) are just profiting off of Pine64's community developing linux support for their SoCs. They seem to miss the point that the community wants products like these to tinker with and don't mind doing some legwork to get things functional. It's not ideal, but its better than nothing.
- natpalmer1776 5y agoI believe Pine64 is making profits off of people buying developer devices that have little-to-no actual functionality as a means of funding the development of the products in question. To then follow that up with allowing most of the multi-million dollar development to be done by hobbyists who have purchased your non-functional hardware and you have a recipe for... something.
- excitednumber 5y agoDoes anyone else worry about pine64 being hq in hk? (reference: https://en.wikipedia.org/wiki/PinePhone https://en.wikipedia.org/wiki/PinePhone)
- officeplant 5y agoNot really as they have always been fairly open about working closely with factories in Shenzhen that product the products if you subscribe to their monthly email digest. Their previous US based offices seemed kinda pointless.
- amelius 5y agoBut what happens if China takes over control in HK?
- CameronNemo 5y agoChina already has control over HK and the non-HK factories and shipping centers where the products come from.
- officeplant 5y agoA change in geopoltics?
- fsflover 5y agoThey publish schematics for their devices.
- coffeecat 5y agoIf you're worried about that, you can go with Purism. But, because their employees make San Francisco salaries, and they lack expertise and connections within China's supplier/manufacturer scene, Purism can't even come close to competing with Pine64 on price.
- lettergram 5y agoI really wish I could just get a half decent pinephone ...
- fsflover 5y agoI have it. What's the problem with the Pinephone?
- paulcole 5y agoI wish Pine would make 1 finished consumer product instead of 10 things no average person should even consider buying.
- kayodelycaon 5y agoI'd argue that anyone wanting a fully open source anything isn't an average person. If you want something finished and mostly open, a reMarkable tablet already works. If you want something with android and are okay with GPL being completely ignored, let me point you towards Boox.
- paulcole 5y agoWith good consumer products, it doesn't matter if they're open source or not to the average person. I guess Pine is fine being in the semi-useless and unfinished products business.
- infinite8s 5y agoI don't think you are their target customer. Which is fine, as the GP pointed out there are other products that would probably fit you better.
- foxfluff 5y agoWhy not buy from brands that make consumer products? To me, Pine products are for hackers & makers. I've three pinecils, both pinepowers, a couple "woodpecker" serial dongles, and some related accessories. Everything I've bought has worked great and been worth every cent. I wish they keep doing exactly the kinds of things they've been doing.
- jbawn 5y agoI've been happy with my Remarkable and am looking forward to more of these devices coming to market.
- spaniard89277 5y agoMake an e-ink display for Pinebook, please. It would be a game changer for working outside, despite all the faults e-ink displays have. I write often, and I think I could adapt to code without colors with a little effort.
- CameronNemo 5y agoCouldn't you just use a stand/keyboard that also acts as a cover with this device?
- spaniard89277 5y agoIt's not the same, a proper laptop with a proper keyboard is another game entirely.
- rbanffy 5y agoIf only PixelQi still existed…
- 1024core 5y agoMost of the device’s functionality, including the e-paper display, do not work at this time. :-(
- tohnjitor 5y agoLooking forward to further development of this so I can display sheet music PDFs. Sheet music specific e-ink tablets are a bit expensive.
- grogenaut 5y agowould a remarkable work for you or a boox?
- tohnjitor 5y agoBoox: Totally would if the price came down a bit. I know that's a big ask with eInk displays being proprietary but a guy can dream. remarkable: Don't know enough about it but maybe the same caveat applies. The trouble with sheet music is full size is quite large. 8.5" x 11" is probably "close enough" much of the time but even that is bigger than most eink displays.
- robinsoh 5y ago> I know that's a big ask with eInk displays being proprietary but a guy can dream. Is there such a thing as a non-proprietary display?
- foodbag 5y agoI received my PineNote today. It boots into a PIM-style UI built on Android. The stylus works great for taking notes on it. It has a browser too! The hardware and case feel high quality. The Pine/Linux community are working on porting Linux kernel/distros to it.
- CameronNemo 5y agoThe Pine/Linux community are working on porting Linux kernel/distros to it. Who, exactly, is working on porting a mainline kernel to it? I've not seen much development on the most important part (the rink display driver).
- foodbag 5y agoThere's no centralized development that I know of. The Wiki tends to lag reality, but two pages are related: * https://wiki.pine64.org/wiki/PineNote_Development https://wiki.pine64.org/wiki/PineNote_Development * https://wiki.pine64.org/wiki/RK3566_EBC_Reverse-Engineering https://wiki.pine64.org/wiki/RK3566_EBC_Reverse-Engineering tracks the status of that.
- coolspot 5y ago> The stylus works great for taking notes on it. Define “great”. When you draw a line, how large is lag (distance) between a point of touch and where last pixel is drawn? Slow-mo video of handwriting or fast sketching would be useful.
- mschuster91 5y agoI'd be interested in buying and tinkering with one... I'm not afraid getting my hands dirty with embedded Linux stuff, the only thing I am afraid of is that I end up with a board that (despite saying "production run") has some issue on the PCB that makes core functionality (e.g. CPU, RAM, display, USB-C or WiFi) unable to work in hardware. What are the options in case there indeed is some sort of defect on the PCB?
- joebiden2024 5y agoCan these output video as well?
- mynameisash 5y agoI really want an 8.5x11 or bigger, very low power e-ink device that I can use as essentially a photo display. I was inspired by this[0], but as I'm not a hardware guy at all, trying to make one is out of my reach. Hopefully this PineNote will become that device sometime. [0] https://youtu.be/gECj1AE9D2c https://youtu.be/gECj1AE9D2c
- daly 5y agoI spend all of my days reading PDFs. I want an 8.5x11 device with large-size microUSB. Nothing fancy, no markup, no net connection, huge battery. Simple page turning (could be touch or button). Simple file handling. Memory of where I stopped reading. You could sell these things in volume, the first venue being libraries and bookstores. Students with school library access could use them to carry all of their papers. Profs could use them for research. Sci-hub would be a perfect research match.
- infinite8s 5y agoIt's too bad it needs Linux as a base, would be great to build a Smalltalk-based system using something like the circle library for low-level access (https://github.com/rsta2/circle https://github.com/rsta2/circle). Hopefully someone can reverse engineer the binary blob for controlling the eInk display.
- the_biot 5y agoOh, is THAT what's stopping you from building a Smalltalk-based system using something like the circle library for low-level access. Damn, so close!
- infinite8s 5y agoWell, something like the smalltalk-78 that Alan Kay demos here (https://youtu.be/AnrlSqtpOkw?t=242 https://youtu.be/AnrlSqtpOkw?t=242) would be an ideal starting interface for e-ink based tablet.