I am not terribly well versed in Rust MCU development, but I poked around with the teensy-rs and esp32-rs projects a couple years ago. ARM seems to provide som

I am not terribly well versed in Rust MCU development, but I poked around with the teensy-rs and esp32-rs projects a couple years ago. ARM seems to provide some XML register description files called SVDs[0]. They seem to do a decent job describing the registers and peripherals in a way that allows code generation tools to create a register access library, upon which higher level HALs can be built. For an example, you might look at the esp-rs project on GitHub. The lowest level, if I recall correctly, is the Peripheral Access Crate [1]. The README for this project describes a bit about the SVD file, and svd2rs code generation tool. Sometimes the SVD file needs to be patched to produce high quality Rust bindings. This PAC is then required as a dependency of the higher level HAL for the esp32 [2]. The higher level HAL also implements some traits from a shared Rust HAL effort [3]. I'm not really an expert in Rust so if I've described any of this wrong, someone please correct me. [0] https://www.keil.com/pack/doc/CMSIS/SVD/html/index.html https://www.keil.com/pack/doc/CMSIS/SVD/html/index.html [1] https://github.com/esp-rs/esp32 https://github.com/esp-rs/esp32 [2] https://github.com/esp-rs/esp32-hal https://github.com/esp-rs/esp32-hal [3] https://docs.rs/embedded-hal/0.2.2/embedded_hal/ https://docs.rs/embedded-hal/0.2.2/embedded_hal/