3 ms·
The economic forces that led to cheap laser stages which can be used for science never fail to amuse me. The equivalent, if you were clever and building things
by dekhn 5y ago
The economic forces that led to cheap laser stages which can be used for science never fail to amuse me.
The equivalent, if you were clever and building things from components, would cost many thousands of dollars and engineering time and never be as reliable.
I'm still looking for a replacement for conventional motorized microscope stages (like https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=3002 https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=30... but for $150 instead of $1500).
- dr_coffee 5y agohttps://journals.plos.org/plosone/article?id=10.1371/journal.pone.0088977 https://journals.plos.org/plosone/article?id=10.1371/journal... Heres a decent open source? stage that i adapted for one of my projects in the past. Resolution is 1 micron laterally. If i remember correctly they address several issues including stepper motor backlash and micro-stepping. Cost can be well below the $1000 they quote depending on the parts you choose, or e.g. if you do only two axis (xy) stage instead of three (xyz)
- dekhn 5y agoI built this stage already (XY with a separate stepper-based Z-stage). I agree, the cost is low, but I found endless problems with the motor to micrometer coupling. Specifically, the torque on the shaft changes quickly during rotation and that led to non-equal spaced steps. My guess is that the shafts I'm using are inferior to the ones they use, but honestly I can't tell (it's hard for me to justify spending $100+ for a cable if I don't know if it;'s going to work). Or, they have a different geometry for the cables. Since then I've also tried another approach, using a GT2 belt, but the belt deflects significantly at the extent of stage range (50mm). My next attempt is going to be to fix the steppers to the stage itself so that they move witth the stage.