4 ms·
Years ago, I used a Linux script from the vendor to upgrade my us robotics "56k message modem" from V90 to V92. The result was a brick. Lifetime warranty or no
by snvzz 5y ago
Years ago, I used a Linux script from the vendor to upgrade my us robotics "56k message modem" from V90 to V92.
The result was a brick. Lifetime warranty or not, the vendor did not honor warranty. Thus I do recommend getting your modem elsewhere. By now, I'd expect OSHW solutions to be available.
Should anybody know how to possibly get past the brick, please let me know. A cursory glance inside years ago didn't yield anything that looked like a PROM.
- VRay 5y agoGood news, it’s the year 2021 and computers are so fast that you could probably bit bang a 56k modem connection using a python script on a raspberry pi
- snvzz 5y agoDSP on the cpu would definitely suffice today (albeit undersirable). But it would still need some analog hardware to interface the phone line. Ultimately, I'd like the old device I liked to watch the leds blink on to be back alive again, preferably without replacing the whole PCB.
- deleted 5y ago[deleted]
- Scoundreller 5y agoI can't find any scans of the external modem PCBs, but the internal ISA ones have a 28f or 29f series EEPROM from what I've seen. Often there's a sticker on them with firmware info, which suggests they're programmed before being soldered on the board (ie: no JTAG). The internal ones shouldn't be much different than externals, they just implement another serial interface. Would be a pain to desolder and resolder if it's a TSOP chip, but PLCC isn't too bad. You might have some better luck if you high-jack a compatible motherboard's floppy-disk BIOS update process to write a new binary. 56ks are not very expensive to buy off ebay.
- snvzz 5y agoI'll have to look at it again at some point. I last did over 10yr ago. If it was a 28f or 29f I failed to locate, I'd be able to very easily write to it; I also can solder/desolder these days. The next problem would of course be to locate the actual firmware to burn.
- Scoundreller 5y agoJust buy another that has been upgraded and dump its firmware
- dehrmann 5y agoI did some firmware hack to make a 28.8 or 33.6 Sportster a 56k one. I think there was a window where they used the same hardware, but throttled it down in firmware so they could charge more.