9 ms·
And now power supplies are getting another step smaller and more efficient by switching from silicon transistors to GaN. (https://www.cui.com/blog/how-gallium-n
by tim333 5y ago
And now power supplies are getting another step smaller and more efficient by switching from silicon transistors to GaN. (https://www.cui.com/blog/how-gallium-nitride-gan-enables-smaller-more-efficient-power-supplies https://www.cui.com/blog/how-gallium-nitride-gan-enables-sma...)
- alexose 5y agoI've been using a GaN-based power supply for my MacBook Pro and it's just as good as advertised. Slightly bigger than a deck of cards, yet it runs cooler than the stock unit. Hopefully this tech finds its way into more devices as it gets cheaper. It would be neat to have GaN based inverters for electric cars.
- nimish 5y agoTesla use silicon carbide which has favorable temp and reliability over Gan for higher voltage operation.
- R0b0t1 5y agoFor highest end stuff you use both. They have different properties. SiC matters for reverse recovery of the inverter.
- phasetransition 5y agoIs there some sort of third quadrant effect, like might be seen for a triac?
- codeisawesome 5y agoI thought this was a new "ML powered" charger of some type until I googled... interesting find.
- KarlKemp 5y agoThose are NaN chargers.
- crishoj 5y agoMay I ask which model you use?
- alexose 5y agoSure! I was trying to avoid mentioning it to avoid seeming like an advertisement. (I have the HyperJuice 100W USB-C adapter)
- xqyf 5y agoThey work great to charge my Android. One day MacBook chargers may even charge iPhones!
- tenantless 5y agoI use a MacBook charger with my iPhone every night...
- spectre3d 5y agoiPhones ship with a USB-C to Lightning cable. Plug that into the MacBook charger and you’re good. No problem here, is it not working for you?
- dehrmann 5y agoAny advice on buying these? A lot of the GaN bricks look impressive, but they're always made by a sketchy peripheral maker.
- kitsunesoba 5y agoI don't know if they make the size you need, but Anker makes GaN chargers and their products are usually pretty solid.
- scottlamb 5y ago* Make sure they are UL listed for safety, as Animats pointed out in an earlier discussion. [1] Some aren't, even from well-known brands like Anker. * If they are multi-port, make sure you're happy with how they distribute power. Most likely you want the majority of the power going to port 1 where you stick a laptop, but some drop it down to 50W or lower if you just have a cable in one of the other spots, much less any device connected. I love the monoprice ones. They're small, inexpensive, inconspicuous, and meet the standards I described above. They also charge all my devices reliably, unlike my (larger, I think non-GaN) Nekteck chargers that spend their time in a drawer now. Buy a 5A cable to get the full 100W out of them at 20V. [1] https://news.ycombinator.com/item?id=21679302 https://news.ycombinator.com/item?id=21679302
- X-Istence 5y agoEven-though the Anker brick I have does not have an Underwriters Laboratory logo on it, it does have a TUV and a CE logo. TUV is the equivalent to UL but is a testing house mostly geared towards Europe. That being said, TUV like UL is listed as a Nationally Recognized Testing Laboratory (NRTL) in the United States (for more information see: https://www.tuv.com/usa/en/ctuvus-certification.html https://www.tuv.com/usa/en/ctuvus-certification.html) and thus is just as safe. The UL logo may be more recognizable in the US, however they too certify for both markets, with UL also having their UL EU certification program.
- Scoundreller 5y agoA TUV mark would only be accepted in North America it was a cTUVus stamp on it. What I wonder is if TUV in Europe just tests at just 240V if it’s labelled 100v-240v, or across the labelled voltages (though lower voltage should mean fewer problems).
- vwoolf 5y agoAt first glance I thought the article would discuss GaN. Agree with the overall point; Anker seems to be making well-thought-out GaN chargers.
- byw 5y agoCan this also be used for electric car inverters?
- baybal2 5y agoYes, it can, but that would be pricey with regards to how much current they can handle. GaN switches can't handle as much as silicon, or SiC, despite their higher efficiency. Stall torque == current.
- londons_explore 5y agoIt surprises me that GaN marketed power supplies cost extra. The actual GaN transistors are under 10 cents now, and by using one you can use a smaller inductor, smaller capacitor and smaller heatsinks. Those smaller components lead to a smaller plastic case and smaller circuit board. All of those smaller things cost less, so the finished product has lower production costs.
- tim333 5y agoThe ones I've bought haven't been terribly expensive. About half the price of Apple chargers. I daresay you don't want to go too cheap with chargers as they can overheat/pack up/damage things.