3 ms·
The rotating mass of the heat sink would need an enclosure for safety reasons, negating most of the airflow advantages. "Transfer heat through an axle" sounds l
by h2odragon 5y ago
The rotating mass of the heat sink would need an enclosure for safety reasons, negating most of the airflow advantages. "Transfer heat through an axle" sounds like one of those "draw the rest of the owl" steps too; no idea how that's supposed to work.
*edit: Maybe a hydraulic motor where the fluid is turning a big impeller? Torque converter with an open side, kinda thing...
- amelius 5y agoPerhaps the CPU is rotating too? Wait, perhaps I should patent this idea first.
- Y_Y 5y agoThe amazing part of this is that each individual core makes contact with each region of the (obviously stationary) memory drum once per revolution, providing dynamic cache adjacency.
- layoutIfNeeded 5y agoMel nods in approval: http://www.catb.org/jargon/html/story-of-mel.html http://www.catb.org/jargon/html/story-of-mel.html
- layoutIfNeeded 5y agoMake sure to incorporate an anti-twister mechanism for extra weirdness points: https://en.m.wikipedia.org/wiki/Anti-twister_mechanism https://en.m.wikipedia.org/wiki/Anti-twister_mechanism
- KMag 5y agoRight. High thermal gradients through ball bearings or roller bearings are tricky, and you don't get much contact area for thermal conduction in the bearing (meaning most bearing applications need to be mindful of cooling). (Pro tip from MIT 2.72: make sure to position bearings such that thermal stress from the shaft undergoing more thermal expansion than the rest of the machine doesn't jam the bearings.) I guess you'd want a bearing with sodium-potassium alloy (hazmat!) or mercury (hazmat!) or something. Or... make the casing for the shaft into a heat pipe with ammonia or alcohol vapor.
- convolvatron 5y agoWhat about old style Babbitt bearings
- KMag 5y agoYou're right. Plain bearings provide plenty of contact surface for thermal conduction. Though, thermal expansion will tend to increase clearance and decrease contact area (ignoring differences in thermal expansion between dissimilar materials).
- drudu 5y agoA linked video claims that the commercial version attempts to transfer heat from one rotating metal surface to another (the the part that connects to the CPU and the bottom of the spinning thingy) separated by an extremely thin layer of air. This is "supposed to" transfer heat as if the metal is touching but "doesn't see to work very well in practice"
- icegreentea2 5y agoAs described by the lab, the Sandia cooler predominantly transfers heat across an air-gap (maintained via self-generated fluid bearing) between the base plate and rotating impeller. As described, they claim that if they can maintain the air-gap to 10um, then they get a net win since the specific (per surface area) thermal resistance is sufficiently low (due to only being 10um), and the transfer surface area is comparatively enormous. Nevertheless, the air-gap still forms the dominant component of their overall thermal resistance. Reading through their posted development report [0], it's apparent that they were having trouble hitting that 10um target with their designs. Not exactly a surprise that this is the most difficult part. Not surprising that the "commercialized versions" (see other posts) don't use this mechanism. [0] https://ip.sandia.gov/techpdfs/Development%20of%20Sandia%20Cooler%20SAND2013-10712.pdf https://ip.sandia.gov/techpdfs/Development%20of%20Sandia%20C...