3 ms·
If would be a very long diversion. The turning radius of large ships is, well, astronomical, we're talking miles. The canal itself is MASSIVE - 79ft deep and 7
by TylerE 6y ago
If would be a very long diversion. The turning radius of large ships is, well, astronomical, we're talking miles.
The canal itself is MASSIVE - 79ft deep and 700ft wide - and if you're turning you'd need to be wider still. We're talking about removing absolutely massive amounts of material.
- Aeolun 6y agoWell, they did it before, and without the help of the massive diggers we have currently, so it can’t be that hard, relatively speaking. Besides, my newspaper said that the economic losses of the stuckness amount to like 400M per hour. That is a looot of money you can throw at a problem.
- nostrademons 6y agoThe Suez Canal took 10 years to build, with > 30,000 people working on it at any given time and over 1.5M total laborers, thousands of whom died. I don't think we want to be waiting for 10 years. Cheaper to blow up the ship and its cargo than to re-build a whole new canal.
- TylerE 6y agoBlowing it up isn't really a solution either, that still leaves the canal blocked, as it was for 8 years after the 6 day war. https://en.wikipedia.org/wiki/Yellow_Fleet https://en.wikipedia.org/wiki/Yellow_Fleet
- nostrademons 6y agoI was being semi-facetious, but now I see that a bunch of people seem to be suggesting that in all seriousness. Poe's Law strikes again.
- ReflectedImage 6y agoActually with a well placed nuclear warhead placed directly under the ship, it could be thrown out of the canal and into the nearby desert clearing the canal route /s
- tomatotomato37 6y agoFun fact: the ship is larger than the fireball of a peacekeeper warhead would be (~320 meters)
- playerm1 6y agoMay want to use two of those bad boys then
- lazide 6y agoThose were what, 300kiloton’s ish? So if we go to 1+ megaton we’d be good. Seems reasonable if we go up to 3-4 megatons, maybe we’d even end up with a big enough crater one of these ships could pull a three point turn next time?
- aww_dang 6y agohttps://en.wikipedia.org/wiki/Project_Plowshare https://en.wikipedia.org/wiki/Project_Plowshare >Proposed uses for nuclear explosives under Project Plowshare included widening the Panama Canal, constructing a new sea-level waterway through Nicaragua nicknamed the Pan-Atomic Canal, cutting paths through mountainous areas for highways, and connecting inland river systems.
- arethuza 6y agoA better way would be to explode one medium sized nuke under the ship, wait a few seconds then explode another and then start exploding nukes behind it until it's going fast enough. Project Orion did contemplate a 400m diameter ship weighing 8 million tons.... https://en.wikipedia.org/wiki/Project_Orion_(nuclear_propulsion) https://en.wikipedia.org/wiki/Project_Orion_(nuclear_propuls...
- cesarb 6y ago> The turning radius of large ships is, well, astronomical, we're talking miles. But do the ships actually have to turn? As long as they are floating instead of stuck in the sand, can't they be dragged sideways, either by tugboats or by stationary winches on land? Of course, the ships would have to stop first, which would take miles of slowing down, and it would probably still be faster to fully dig the stuck ship out of the sand than to dig a diversion channel.
- kbenson 6y ago> The turning radius of large ships is, well, astronomical, we're talking miles. That's when under speed. If these ships don't have the unidirectional port engines like cruise ships do for maneuvering in tight spots (and they may not, I don't know), in this situation they would likely use tugboats for turning. That's what they're for. That doesn't necessarily make a diversion feasible, but I don't think whether it's feasible or not rests on whether these ships can turn. That's really not the problem as I see it.
- TylerE 6y agoIf with a zero turn radius, these ships are in excess of 1000ft long...you need a lot of clearance and a large radius just because of the physical dimensions (and so you know, we don't get a second ship wedged sideways in the canal.
- kbenson 6y agoWe're talking about digging a diversionary channel. Making either end of that where it connects to the current channel wider to accommodate turning is trivial in comparison.
- ethbr0 6y agoIf you're talking about digging a diversionary channel, then why not just dig around the boat with the same equipment? Excavate sand around + weight from ship pancakes sand its sitting on, gradually = ship lowers back to floating depth
- TylerE 6y agoProbably very complicated since you couldn't have people in close. What if, as is not unlikely, part of the bank suddenly crumbles and the boat shifts? Also, I doubt the sand goes down very deep...this is a costal area, not rolling dunes. You're going to hit rock quickly.
- deleted 6y ago[deleted]