3 ms·
>intuitively my brain does not grok why it gets easier to move something by pulling a bit more rope than usual Warning: This is probably wrong because I am con
by imtringued 6y ago
>intuitively my brain does not grok why it gets easier to move something by pulling a bit more rope than usual
Warning: This is probably wrong because I am conjuring this from my mind without looking up any resources.
You have rope. The rope can carry 50lb. You want to lift something that weighs 100kg. You cut the rope in half and attach two ropes to the stone and the ceiling. Now you got a 100lb weight attached on two 50lb ropes. The cross section area of the rope is 1 square inch (random number). The rope happens to hold exactly 50lb per square inch. We write this down as 50 psi. But wait. Since we added two ropes we have increased the cross section thus we have 100lb hanging on 2 square inches of rope. We are still within 100lb/2i^2 = 50psi. What if we have 4 ropes? 100lb/4i^2 = 25psi and so on. The amount of force each rope applies on the stone is shrinking. Since 1 rope = 1 square inch we get 25 pounds of force on each rope.
Now lets go back to pulleys. There is no meaningful difference between statically attaching rope (although one end has to be attached) and letting it hang off a pulley or letting an object hang off a pulley. The end result is that you have effectively attached the rope 3 times to the ceiling and what you are holding is only a faction of the cross section area that is actually holding up the stone. You have to pull more rope because there is 4 times as much rope and the wall is just holding the rope at a fixed point.