8 ms·

How to Start a Biotech Company on a Budget

145 points by flipchart 6y ago

throwaw4ybio 6y ago
How can I take this seriously when it doesn't mention ebay anywhere?
- koeng 6y ago
  Maybe they were all govdeals type of people
- JabavuAdams 6y ago
  Explain?
  - koeng 6y ago
    You can buy a ton of very expensive biotech equipment off of ebay for very little, which is what a lot of bootstrapped biotech companies do (plus gov-deals and other pharma auction sites)
    - throwaw4ybio 6y ago
      Exactly this! (+1 to govdeals too, when the auction is in geographic range) While we've gotten nibbles from accelerators, up to the interview stage, they want to see an MVP before funding us. This is, of course, kind of a non-starter when you don't have 200k lying around for a minimal denovo lab, and there's not much in the way of rental lab space where we are. Thankfully, after four years of grinding on this as our side gig -- and a big slowdown due to the plague -- we've got enough preliminary data to apply for an NIH grant, which we're very optimistic about. My wife and I have a setup up in our house (it's all GRAS and Biosafety Level 1 stuff) and have mostly bought off ebay and govdeals. She's a neuroscientist and I'm a physics/engineering guy. My job is to handle the business end, acquire gear, and maintain it so that she can science as hard as possible. Most of our lab gear is 80s and 90s-vintage gear we've fixed up. You'd be amazed what a little analogue electronics knowledge can do here; people will throw out a device rather than replace the belts or motor brushes. We'll get used and broken gear at a fraction of of the cost of new and certified refurb machinery. I'm currently modding our venerable Labline orbital shaker incubator. Over the course to two months the tachometer and both of the remote bulb thermostats on it went out, so I'm installing a Johnson Controls A421 to manage the heater and adding a $20 Hall effect tachometer to replace the analog tach. The mechanicals are solid, though (got it for $300 plus freight!) and getting another would be a slow expensive crap shoot. BTW, readers, do you think that there is an audience for a blog that talks about the details of rebuilding old equipment like this? I'm not big on video, so it would mostly be long form writing with lots of images.
      - koeng 6y ago
        I'd like that! If you want to get some readers for it, check out the DIYbio forums on google groups. They aren't as active as they were years ago, but there are still a bunch of knowledge people there.
        throwaw4ybio 6y ago
        Thanks for the tip!
      - daemonk 6y ago
        I want to point out that it really depends a lot on what kind of lab it is. I think for R&D, buying cheap stuff off of ebay or labx is great. But if your goal is to eventually scale up and build a production lab, you will need to switch your mindset when you get some funding and buy some decent equipment. It can make a big difference from my experience. My company started out at a sub-par lab space with second hand equipment. When we moved to a very well equipped lab, we found ourselves exponentially more productive. Mainly because we no longer have to constantly second-guessing our results due to sub-optimal equipment/reagents. Re-running experiments because of potential equipment failure adds up in terms of resources and psychological stress.
        throwaw4ybio 6y ago
        Oh absolutely agree. The amount of time we spend washing dishes is absurd. We yearn for the end of the bootstrap phase.
      - 1996 6y ago
        > Most of our lab gear is 80s and 90s-vintage gear we've fixed up. You'd be amazed what a little analogue electronics knowledge can do here; people will throw out a device rather than replace the belts or motor brushes. We'll get used and broken gear at a fraction of of the cost of new and certified refurb machinery. (...) > BTW, readers, do you think that there is an audience for a blog that talks about the details of rebuilding old equipment like this? I'm not big on video, so it would mostly be long form writing with lots of images I see a business spin: sell shovels for the upcoming biotech boom. Get equipment on the cheap, fix it, reseller it with a warranty.
  - ChefboyOG 6y ago
    I believe they're referring to buying lab equipment on eBay. https://www.nature.com/articles/d41586-018-05655-3 https://www.nature.com/articles/d41586-018-05655-3
ArtWomb 6y ago
>>> Finding an initial product that’s reimbursable and then taking the shortest path to get there This is really inspiring. Contrast with the typical story like Sana Bio which burns tons of R&D cash. My question is: how do you systematically search the potential solution space which may not be your initial area of expertise? How did the solution to focus on easily billable pre-natal diagnostics present itself to a team with oncology expertise?
- fuzzfactor 6y ago
  >How did the solution to focus on easily billable pre-natal diagnostics present itself to a team with oncology expertise? Make the most of what you have to work with. I like to build laboratories using research equipment for money-making purposes, not biotech but industrial chemicals. An ideal way to start can be with a procedure which the laboratory has recognized expertise in, often with a firm foundation of unique or advanced apparatus. A lot of work involves instruments and they can be expensive and supported by very versatile (costly) infrastructure in academic or industrial research environments. A worthwhile operation, well rehearsed on an earlier model of the same equipment, can often be invoiced repeatedly in a more businesslike way if the gear can be maintained without completely relying on costly manufacturers' service and supply offerings. Especially once it's paid for, then even if the invoiceable work drops off you can leave the fully depreciated asset in the lab as long as you want anyway. Without the institutional overhead a good niche is to offer very limited variety of functions which actually cost the researchers more to have accomplished in their own large laboratories. Plus if you can help them overcome delays or previously unsurmountable obstacles they will want you to work overtime. If everything turns out good each project pays for itself and always performs profitably after that whenever needed. But in between your invoiceable sessions you end up with way more instrument time than any institutional researcher, and have more freedom to do whatever you want most of the time. That's a huge multiplier on the equipment productivity alone in case you do need to pull ahead in the experimentation & discovery department, you can often outperform a PhD who doesn't have nearly as much chance for bench discoveries, and many do not spend very much time at the bench anyway. Simply too many bright PhDs of all ages would experiment more if they could but there has never been enough time across the board. With a bootstrapped high-productivity structure, if you disclose the full one percent of your actual progress people will think you're highly accomplished and you can publish it yourself with handouts at conferences. Until you decide to monetize any breakthroughs or milestones, you can survive or even thrive on the output of your documentation process if you can just issue a single page on average per day of laboratory data to a client. I'm sure there are a number of niches where the going rate is now over $1000 per page and it can be worth working up to it even if it takes a few years. Also took me a while to get a basic report onto a single page for each invoiceable process. After that I never had to publish anything I didn't want to unless somebody was paying for every page. Plus then you can carry on your research however long it takes. Without having to do any excess paperwork seeking grants or publishing lack-of-progress reports. You'll have to deal with business paperwork and client interaction instead. That can be just as frustrating but at least it pays the bills at the same time it can build shareholder value. You don't need citations if you can give clients their money's worth and have an invoice printer attached to your instruments like they don't have at the university or places like DuPont research. Plus once you're in business you'll have backups they don't have either. I'll be doing it again, would recommend it.
dnautics 6y ago
> Intensely focused on demonstrating technical feasibility, he and his co-founders found $75K in grant money and hired a postdoc at Cornell to do the first proof-of-principle study. That's still quite a budget. Not the sort of thing accessible to many people. What if you're a grad student that just finished their phd (coming off of making 40k a year for half a decade), and not, say, a professor that has connections? Where do you get this initial seed?
- hahla 6y ago
  Grant money is definitely accessible at least here in the USA. I have seen grant funding available for various industries in my state alone, and it doesn't require any specialized expertise to apply for. Typically anything <$100k seems easier to come by.
  - dnautics 6y ago
    Real questions, I'd like to know from someone successful at it (is that you?): What was involved? How much of a proof of concept was necessary? How many connections did you have?
- JabavuAdams 6y ago
  Well, hopefully you networked with your profs and their contacts during that time? They can probably help...
  - dnautics 6y ago
    Not all professors are good at that, or even practicioners. Ironically if you get away with doing good science as a grad student there may even be an inverse correlation. Less time networking = more time at the bench. While I appreciate that self-promotion is a valuable skill, I believed (possibly flawed) understanding? narrative? that part of the reason why YC / tech incubation / tech can be effective is that it provides a structure where folks who are highly technically minded and historically preferred to spend time leveling up on that can be given easy access to networks with a builtin trust biased to some relatively technical merit, and resources to help level up on networking at all stages (whether that's PG's imprimatur that gives you access to VC offices for late stage companies or resources to help you find networkers in early stage companies). If YC doesn't acknowledge the structural barriers that make identifying technically meritorious biotech founders (vs biotech founders that have focused on buzzwords and networking) difficult then it's going to have a rough time meeting the success expectation it has for software, on biotech. It's nice to say you want biotech portfolio, but the proof is in the pudding what are you actually doing differently to get it done?
mc32 6y ago
Without connections in the industry it would be hard. These things cost time and money. It’s not something you can do in one year. You need five to seven years... if you’re on the right track. Also you cannot know in advance if a clinical product can be repurposed because that’s not evident till you begin studying your first target (where the data might show other unpredicted positive outcomes elsewhere.)
shrewdcomputer 6y ago
> Arpeggio used their own technology to do drug discovery, and sold it as “consulting” to build credibility with investors and trust with a few initial clients. This sounds like a great example of them focusing on one thing and doing it well. It must have been a tightrope walk not to give too much information away about their IP and get crushed by competitors.
koeng 6y ago
I've just started a bootstrapped biotech company in the last ~4 months, and it's definitely possible, but does depend on your niche. I'm lucky because I can live with my parents and convert my room into a lab, but normally you have to rent a lab to even get things shipped to you. I also previously had intentionally developed the skills to do work on an actual "DIY" capex budget, which most folks coming out of academia don't have. Intense domain knowledge + knowledge of programming + affordable automation is really a fantastic combination to have with biotech. When the software isn't advanced enough, you can do tricks with hardware. When the hardware isn't advanced enough, you can do tricks with biology. When the biology isn't advanced enough, you can do tricks with software. It really does depend on connections, though. All of my early customers are folks I've known in the community for years, so I can get paid while working out all the kinks in the system.
- JabavuAdams 6y ago
  I'm interested in lab automation, and ramping up on that. Do you have any automation needs?
  - koeng 6y ago
    Sure. Right now, Opentrons rules with their open source robots, so liquid handling robots are pretty well handled. Xarm makes good arms for interfacing with Opentrons, so then it comes to everything else necessary to get to full automation. 1. Automated plate hotels I need plate hotels to storage samples that interfaces with my robot arm and robot systems. This I'm basically using Theo Sanderson's designs for this https://www.thingiverse.com/thing:2668120 https://www.thingiverse.com/thing:2668120 since buying them commercially is so darn expensive. I really need this for my system, so I am building em. 2. Plate sealer / unsealers My entire full automation pipeline is built around NOT needing a plate sealer or un sealer (something you can't do with the vast majority of screening systems). Automated versions of just the sealer itself cost more than 2 liquid handling robots and a robotic arm combined (and all it does is seal plates!) I think there is an opportunity for building simple but effective automated plate sealers and unsealers. 3. A train system I think Concentric (Ginkgo's COVID company) uses something similar, but basically a system that can use small trains to bring plates and reagents around a lab to different robotic stations. I'll probably just do that with lines of robotic arms, but I definitely spent quite a bit of time thinking of how to do this. (in my factorio megabase I really learned how to route trains, and I think it's exactly the same problem I face with my robotic work stations). I'm not sure how to scale the selling of that though.
nceqs3 6y ago
Are there any guides on filing Patents as an individual for biotech inventions? Seems like that is the most obvious way to raise capital and protect IP. Patent fees for an individual/small entity are only a couple thousand dollars in the US.
dvdt 6y ago
I'm the Co-founder and CTO of BillionToOne, one of the biotech companies profiled in the post. We're recently opened up a position for a Staff Software Engineer (https://apply.workable.com/billiontoone/j/2F0405817C/ https://apply.workable.com/billiontoone/j/2F0405817C/). If you're interested, please reach out to me directly at david+hn@billiontoone.com
- nceqs3 6y ago
  Did you guys use a law firm to file your patents? How difficult was the process?
  - dvdt 6y ago
    We used a law firm. The paperwork was quite straightforward because our attorney managed it.
  - nickff 6y ago
    Not parent, but have been involved in getting patents. The process itself is not that complicated, but it can be difficult to get a patent which has some value (very easy to end up with a worthless one). I recommend reading the Nolo book on patents, if only to help you understand what's going on, and help you select a good attorney. https://store.nolo.com/products/patent-it-yourself-pat.html https://store.nolo.com/products/patent-it-yourself-pat.html
- tikirey 6y ago
  I'm a CTO as well and have been fascinated by biotech field. Could you please describe briefly what's it like to be CTO in biotech? What kind of problems do you solve?
reasonattlm 6y ago
If you can get into an incubator lab space that isn't in a major market like SF or Boston, where the rents are insane, one can expect to set up a reasonable wet lab for most uses given $200k in equipment and reagent costs and a couple of months of time. Then expect $5-10k/month in operating costs outside of salaries.

145 points by flipchart 6y ago

throwaw4ybio 6y ago

How can I take this seriously when it doesn't mention ebay anywhere?

koeng 6y ago
Maybe they were all govdeals type of people
JabavuAdams 6y ago
Explain?
- koeng 6y ago
  You can buy a ton of very expensive biotech equipment off of ebay for very little, which is what a lot of bootstrapped biotech companies do (plus gov-deals and other pharma auction sites)
  - throwaw4ybio 6y ago
    Exactly this! (+1 to govdeals too, when the auction is in geographic range) While we've gotten nibbles from accelerators, up to the interview stage, they want to see an MVP before funding us. This is, of course, kind of a non-starter when you don't have 200k lying around for a minimal denovo lab, and there's not much in the way of rental lab space where we are. Thankfully, after four years of grinding on this as our side gig -- and a big slowdown due to the plague -- we've got enough preliminary data to apply for an NIH grant, which we're very optimistic about. My wife and I have a setup up in our house (it's all GRAS and Biosafety Level 1 stuff) and have mostly bought off ebay and govdeals. She's a neuroscientist and I'm a physics/engineering guy. My job is to handle the business end, acquire gear, and maintain it so that she can science as hard as possible. Most of our lab gear is 80s and 90s-vintage gear we've fixed up. You'd be amazed what a little analogue electronics knowledge can do here; people will throw out a device rather than replace the belts or motor brushes. We'll get used and broken gear at a fraction of of the cost of new and certified refurb machinery. I'm currently modding our venerable Labline orbital shaker incubator. Over the course to two months the tachometer and both of the remote bulb thermostats on it went out, so I'm installing a Johnson Controls A421 to manage the heater and adding a $20 Hall effect tachometer to replace the analog tach. The mechanicals are solid, though (got it for $300 plus freight!) and getting another would be a slow expensive crap shoot. BTW, readers, do you think that there is an audience for a blog that talks about the details of rebuilding old equipment like this? I'm not big on video, so it would mostly be long form writing with lots of images.
    - koeng 6y ago
      I'd like that! If you want to get some readers for it, check out the DIYbio forums on google groups. They aren't as active as they were years ago, but there are still a bunch of knowledge people there.
      - throwaw4ybio 6y ago
        Thanks for the tip!
    - daemonk 6y ago
      I want to point out that it really depends a lot on what kind of lab it is. I think for R&D, buying cheap stuff off of ebay or labx is great. But if your goal is to eventually scale up and build a production lab, you will need to switch your mindset when you get some funding and buy some decent equipment. It can make a big difference from my experience. My company started out at a sub-par lab space with second hand equipment. When we moved to a very well equipped lab, we found ourselves exponentially more productive. Mainly because we no longer have to constantly second-guessing our results due to sub-optimal equipment/reagents. Re-running experiments because of potential equipment failure adds up in terms of resources and psychological stress.
      - throwaw4ybio 6y ago
        Oh absolutely agree. The amount of time we spend washing dishes is absurd. We yearn for the end of the bootstrap phase.
    - 1996 6y ago
      > Most of our lab gear is 80s and 90s-vintage gear we've fixed up. You'd be amazed what a little analogue electronics knowledge can do here; people will throw out a device rather than replace the belts or motor brushes. We'll get used and broken gear at a fraction of of the cost of new and certified refurb machinery. (...) > BTW, readers, do you think that there is an audience for a blog that talks about the details of rebuilding old equipment like this? I'm not big on video, so it would mostly be long form writing with lots of images I see a business spin: sell shovels for the upcoming biotech boom. Get equipment on the cheap, fix it, reseller it with a warranty.
- ChefboyOG 6y ago
  I believe they're referring to buying lab equipment on eBay. https://www.nature.com/articles/d41586-018-05655-3 https://www.nature.com/articles/d41586-018-05655-3

ArtWomb 6y ago

>>> Finding an initial product that’s reimbursable and then taking the shortest path to get there This is really inspiring. Contrast with the typical story like Sana Bio which burns tons of R&D cash. My question is: how do you systematically search the potential solution space which may not be your initial area of expertise? How did the solution to focus on easily billable pre-natal diagnostics present itself to a team with oncology expertise?

fuzzfactor 6y ago
>How did the solution to focus on easily billable pre-natal diagnostics present itself to a team with oncology expertise? Make the most of what you have to work with. I like to build laboratories using research equipment for money-making purposes, not biotech but industrial chemicals. An ideal way to start can be with a procedure which the laboratory has recognized expertise in, often with a firm foundation of unique or advanced apparatus. A lot of work involves instruments and they can be expensive and supported by very versatile (costly) infrastructure in academic or industrial research environments. A worthwhile operation, well rehearsed on an earlier model of the same equipment, can often be invoiced repeatedly in a more businesslike way if the gear can be maintained without completely relying on costly manufacturers' service and supply offerings. Especially once it's paid for, then even if the invoiceable work drops off you can leave the fully depreciated asset in the lab as long as you want anyway. Without the institutional overhead a good niche is to offer very limited variety of functions which actually cost the researchers more to have accomplished in their own large laboratories. Plus if you can help them overcome delays or previously unsurmountable obstacles they will want you to work overtime. If everything turns out good each project pays for itself and always performs profitably after that whenever needed. But in between your invoiceable sessions you end up with way more instrument time than any institutional researcher, and have more freedom to do whatever you want most of the time. That's a huge multiplier on the equipment productivity alone in case you do need to pull ahead in the experimentation & discovery department, you can often outperform a PhD who doesn't have nearly as much chance for bench discoveries, and many do not spend very much time at the bench anyway. Simply too many bright PhDs of all ages would experiment more if they could but there has never been enough time across the board. With a bootstrapped high-productivity structure, if you disclose the full one percent of your actual progress people will think you're highly accomplished and you can publish it yourself with handouts at conferences. Until you decide to monetize any breakthroughs or milestones, you can survive or even thrive on the output of your documentation process if you can just issue a single page on average per day of laboratory data to a client. I'm sure there are a number of niches where the going rate is now over $1000 per page and it can be worth working up to it even if it takes a few years. Also took me a while to get a basic report onto a single page for each invoiceable process. After that I never had to publish anything I didn't want to unless somebody was paying for every page. Plus then you can carry on your research however long it takes. Without having to do any excess paperwork seeking grants or publishing lack-of-progress reports. You'll have to deal with business paperwork and client interaction instead. That can be just as frustrating but at least it pays the bills at the same time it can build shareholder value. You don't need citations if you can give clients their money's worth and have an invoice printer attached to your instruments like they don't have at the university or places like DuPont research. Plus once you're in business you'll have backups they don't have either. I'll be doing it again, would recommend it.

dnautics 6y ago

> Intensely focused on demonstrating technical feasibility, he and his co-founders found $75K in grant money and hired a postdoc at Cornell to do the first proof-of-principle study. That's still quite a budget. Not the sort of thing accessible to many people. What if you're a grad student that just finished their phd (coming off of making 40k a year for half a decade), and not, say, a professor that has connections? Where do you get this initial seed?

hahla 6y ago
Grant money is definitely accessible at least here in the USA. I have seen grant funding available for various industries in my state alone, and it doesn't require any specialized expertise to apply for. Typically anything <$100k seems easier to come by.
- dnautics 6y ago
  Real questions, I'd like to know from someone successful at it (is that you?): What was involved? How much of a proof of concept was necessary? How many connections did you have?
JabavuAdams 6y ago
Well, hopefully you networked with your profs and their contacts during that time? They can probably help...
- dnautics 6y ago
  Not all professors are good at that, or even practicioners. Ironically if you get away with doing good science as a grad student there may even be an inverse correlation. Less time networking = more time at the bench. While I appreciate that self-promotion is a valuable skill, I believed (possibly flawed) understanding? narrative? that part of the reason why YC / tech incubation / tech can be effective is that it provides a structure where folks who are highly technically minded and historically preferred to spend time leveling up on that can be given easy access to networks with a builtin trust biased to some relatively technical merit, and resources to help level up on networking at all stages (whether that's PG's imprimatur that gives you access to VC offices for late stage companies or resources to help you find networkers in early stage companies). If YC doesn't acknowledge the structural barriers that make identifying technically meritorious biotech founders (vs biotech founders that have focused on buzzwords and networking) difficult then it's going to have a rough time meeting the success expectation it has for software, on biotech. It's nice to say you want biotech portfolio, but the proof is in the pudding what are you actually doing differently to get it done?

mc32 6y ago

Without connections in the industry it would be hard. These things cost time and money. It’s not something you can do in one year. You need five to seven years... if you’re on the right track. Also you cannot know in advance if a clinical product can be repurposed because that’s not evident till you begin studying your first target (where the data might show other unpredicted positive outcomes elsewhere.)

shrewdcomputer 6y ago

> Arpeggio used their own technology to do drug discovery, and sold it as “consulting” to build credibility with investors and trust with a few initial clients. This sounds like a great example of them focusing on one thing and doing it well. It must have been a tightrope walk not to give too much information away about their IP and get crushed by competitors.

koeng 6y ago

I've just started a bootstrapped biotech company in the last ~4 months, and it's definitely possible, but does depend on your niche. I'm lucky because I can live with my parents and convert my room into a lab, but normally you have to rent a lab to even get things shipped to you. I also previously had intentionally developed the skills to do work on an actual "DIY" capex budget, which most folks coming out of academia don't have. Intense domain knowledge + knowledge of programming + affordable automation is really a fantastic combination to have with biotech. When the software isn't advanced enough, you can do tricks with hardware. When the hardware isn't advanced enough, you can do tricks with biology. When the biology isn't advanced enough, you can do tricks with software. It really does depend on connections, though. All of my early customers are folks I've known in the community for years, so I can get paid while working out all the kinks in the system.

JabavuAdams 6y ago
I'm interested in lab automation, and ramping up on that. Do you have any automation needs?
- koeng 6y ago
  Sure. Right now, Opentrons rules with their open source robots, so liquid handling robots are pretty well handled. Xarm makes good arms for interfacing with Opentrons, so then it comes to everything else necessary to get to full automation. 1. Automated plate hotels I need plate hotels to storage samples that interfaces with my robot arm and robot systems. This I'm basically using Theo Sanderson's designs for this https://www.thingiverse.com/thing:2668120 https://www.thingiverse.com/thing:2668120 since buying them commercially is so darn expensive. I really need this for my system, so I am building em. 2. Plate sealer / unsealers My entire full automation pipeline is built around NOT needing a plate sealer or un sealer (something you can't do with the vast majority of screening systems). Automated versions of just the sealer itself cost more than 2 liquid handling robots and a robotic arm combined (and all it does is seal plates!) I think there is an opportunity for building simple but effective automated plate sealers and unsealers. 3. A train system I think Concentric (Ginkgo's COVID company) uses something similar, but basically a system that can use small trains to bring plates and reagents around a lab to different robotic stations. I'll probably just do that with lines of robotic arms, but I definitely spent quite a bit of time thinking of how to do this. (in my factorio megabase I really learned how to route trains, and I think it's exactly the same problem I face with my robotic work stations). I'm not sure how to scale the selling of that though.

nceqs3 6y ago

Are there any guides on filing Patents as an individual for biotech inventions? Seems like that is the most obvious way to raise capital and protect IP. Patent fees for an individual/small entity are only a couple thousand dollars in the US.

dvdt 6y ago

I'm the Co-founder and CTO of BillionToOne, one of the biotech companies profiled in the post. We're recently opened up a position for a Staff Software Engineer (https://apply.workable.com/billiontoone/j/2F0405817C/ https://apply.workable.com/billiontoone/j/2F0405817C/). If you're interested, please reach out to me directly at david+hn@billiontoone.com

nceqs3 6y ago
Did you guys use a law firm to file your patents? How difficult was the process?
- dvdt 6y ago
  We used a law firm. The paperwork was quite straightforward because our attorney managed it.
- nickff 6y ago
  Not parent, but have been involved in getting patents. The process itself is not that complicated, but it can be difficult to get a patent which has some value (very easy to end up with a worthless one). I recommend reading the Nolo book on patents, if only to help you understand what's going on, and help you select a good attorney. https://store.nolo.com/products/patent-it-yourself-pat.html https://store.nolo.com/products/patent-it-yourself-pat.html
tikirey 6y ago
I'm a CTO as well and have been fascinated by biotech field. Could you please describe briefly what's it like to be CTO in biotech? What kind of problems do you solve?

reasonattlm 6y ago

If you can get into an incubator lab space that isn't in a major market like SF or Boston, where the rents are insane, one can expect to set up a reasonable wet lab for most uses given $200k in equipment and reagent costs and a couple of months of time. Then expect $5-10k/month in operating costs outside of salaries.