3 ms·
I wonder how well several hex-head bolts superglued to the chip would work... (Or some kinda metallic epoxy, even JB Weld is part iron oxide, but a thin layer
by Scoundreller 6y ago
I wonder how well several hex-head bolts superglued to the chip would work...
(Or some kinda metallic epoxy, even JB Weld is part iron oxide, but a thin layer of superglue may be sufficiently effective)
- CydeWeys 6y agoSmall aluminum heatsinks are quite cheap. You'll spend more on shipping than on the heatsinks themselves at this volume. I'd sooner do that, unless you really need to pinch every dollar for some reason.
- Scoundreller 6y agoI’ve got a bucket of old bolts, but not heat sinks :(
- undersuit 6y agoI swear I saw some guy just stack pennies on the chip and the extra thermal mass did wonders. JB-welding it would only increase the heat transfer compared to air between the coin faces. Or you can specialize and get some thermal epoxy made for permanent effective heat transfer: https://www.amazon.com/Arctic-Silver-Premium-Adhesive-ASTA-7G/dp/B0087X7262/r https://www.amazon.com/Arctic-Silver-Premium-Adhesive-ASTA-7...
- Scoundreller 6y agoLooks like US pennies will do a pretty good job (copper plated zinc). With JB Weld you could probably build a set of fins. Most post-2000 Canadian coins are coated steel, meh.