6 ms·
Physicist creates N95-type respirators using cotton candy machine
- helsinkiandrew 6y agoOriginal Article (paywalled): https://royalsocietypublishing.org/doi/abs/10.1098/rspa.2020.0469 https://royalsocietypublishing.org/doi/abs/10.1098/rspa.2020...
- voxadam 6y agoOriginal Article (de-paywalled): https://sci-hub.se/10.1098/rspa.2020.0469 https://sci-hub.se/10.1098/rspa.2020.0469
- kreeben 6y agoUpon clicking your link I realized that: >>>sci-hub.se uses an invalid security certificate. >>>The certificate is not trusted because it is self-signed. >>>Error code: MOZILLA_PKIX_ERROR_SELF_SIGNED_CERT I accepted the risks and proceeded: >>>The requested URL /10.1098/rspa.2020.0469 was not found on this server. I hacked the URL to reach the home page of that site and was greeted with this message: >>>The website you want to visit is blocked! The block is a claim from the Patent and Market Court. It is the result of a lawsuit initiated by the Dutch scientific publisher Elsevier, in a lawsuit against Bahnhof and six other Swedish internet operators.
- teddyh 6y agoSci-Hub.se is not blocked; your ISP is blocking you from Sci-Hub.se. I can access it fine; I suggest you take it up with your ISP. You could try the sci-hub.st or sci-hub.do domains instead; according to Sci-Hub’s Twitter account¹, those are also official domains where Sci-Hub can be located. Unfortunately, http://scihub22266oqcxt.onion/ http://scihub22266oqcxt.onion/ seems to be inaccessible at the moment, as is https://whereisscihub.now.sh/ https://whereisscihub.now.sh/ which used to show at what site Sci-Hub was currently readable. (Also, changing the URL is not, IMHO, “hacking”.) 1. https://twitter.com/Sci_Hub/status/1328843913348739074 https://twitter.com/Sci_Hub/status/1328843913348739074
- kreeben 6y ago>> Sci-Hub.se is not blocked; your ISP is blocking you from Sci-Hub.se. Oh dear. Thx for letting me know. >> Also, changing the URL is not, IMHO, “hacking”. URL hacking: https://www.google.com/search?q=url+hacking+definition https://www.google.com/search?q=url+hacking+definition
- Scoundreller 6y agoOne big issue I have with N95s is that there's no standardization in sizes. So, while I'm fit-tested for a particular manufacturer's model, it probably won't be available to the general public for a long time. I found some other NIOSH N95s recently at a hardware store, but... they seem to be made with a contractor's facial structure in mind.
- codewithcheese 6y agoYep it seems the public did not understand people have different size and shape faces until we all started wearing masks. Just by looking at some masks you can guess which gender the were design by/for, but they are advertised as one size fits all.
- amf12 6y agoAgreed, but fit is more important for hospital and laboratory staff. For general public unfitted N95 like this is still better than some random cloth mask I think.
- clort 6y agoA ICU nurse I know says that every time a new brand/type of mask appears the whole hospital is fitted to ensure that they know who can wear which masks safely. If the mask does not seal, then it was probably a waste of time to have an N95 specification. Facial hair is not allowed; even stubble can interfere with the fit.
- burke 6y agoAnd this totally makes sense for people who are in known dangerous conditions and are relying on the mask operating at peak performance. Lots of people are in the situation of thinking of an N95 mask as an “upgrade” compared to a surgical or cloth mask for grocery shopping, etc. Early in the pandemic there was this line of thinking as if an N95 mask was 100% useless if it didn’t form a perfect seal. This is obviously untrue, and it’s clearly a step up from a surgical mask even with some minor facial hair! How much of a step up is a totally different question and like you touched on it’s quite possible that it’s not worth the extra hassle and discomfort.
- vanderZwan 6y ago> The technique involves heating ordinary plastics such as bottles or shopping bags and then putting them into an ordinary cotton candy machine (also known as a candy floss machine). The machine spins the plastic into a material that is similar to cotton candy (a mesh), which is also electrocharged by the spinning. I'm always sceptical of these kind upcycling plastic narratives that involve melting them, since apparently a lot of plastics only are labeld safe under the assumption that they don't get heated until the melting point. After that they may start leaking chemicals, a bit like the whole non-stick coating story. But if the source of plastic is reliable then this sounds pretty good.
- prvc 6y agoI think they just meant that bottles and shopping bags are made from "ordinary plastics".
- abdullahkhalids 6y agoFrom the abstract > The input polymer is polypropylene or polystyrene, and can include discarded plastic containers of these materials, ... https://royalsocietypublishing.org/doi/full/10.1098/rspa.2020.0469 https://royalsocietypublishing.org/doi/full/10.1098/rspa.202...
- kps 6y agoMarked and respectively. Edit: U+2677 and and U+2678. Obviously no one would ever want to write about plastics on HN, so it's totally OK to strip those symbols.
- _Microft 6y agoBefore you spend time looking this up, this is it: U+2677 is the recycling symbol type 5 (polypropylene/"PP") and U+2678 is recycling material type 6 (polystyrene/"PS"). https://en.wikipedia.org/wiki/Recycling_codes#List_of_resin_identification_codes_(RIC)_and_codes_defined_by_the_European_Commission https://en.wikipedia.org/wiki/Recycling_codes#List_of_resin_...
- mhb 6y agoSome previous work with details and photos: https://arxiv.org/pdf/2004.13494.pdf https://arxiv.org/pdf/2004.13494.pdf
- flybrand 6y agoThis is a combination of melt-blowing and centrifugal spinning - common nonwovens productions methods already used in N95 production. Almost every N95 is made from meltblown materials (thermoplastics) with a polymer that holds electrostatic charge after production.
- rkagerer 6y agoTLDR: McGyver your own N95-like masks from disposed plastic containers and beer cans! As a volunteer firefighter I'm fortunate to have access to N95 masks. As an engineer, I'm frustrated the world hasn't managed to scale production enough for everyone to get them. As a hacker I want to do something about that, and love how creative inspiration like this might provide something better than the same cloth coverings used since the early 1900's. The paper (https://sci-hub.se/10.1098/rspa.2020.0469 https://sci-hub.se/10.1098/rspa.2020.0469) is refreshingly approachable. It explains the basic engineering theory and tests a range of fabrication methods using readily available parts. My favorite example sprayed heated plastic out of a soda can perforated with small holes mounted on the end of a drill. Feedstock was commercial polypropylene (PP) and polystyrene (PS) pellets, but the author suggests raw material could alternatively be sourced from discarded plastic containers sanitized in a domestic pressure cooker then pulverized with a blender. Spun media was pressed between electrodes of a home ionizer to impart an improved electrostatic charge. The study conducts detailed characterization of the self-manufactured masks, compared to baselines obtained from N95 and surgical masks. Scanning electron microscopy imaging of the resultant fiber mesh bore close resemblance to conventional N95 fabric. Some of the filtration tests were improvised - one involved a piezoelectric atomizer, modified mannequin and commodity PM2.5 detectors. Another aerosolized fluorescent-tagged nanoparticles to simulate SARS-Cov-2 virions. Within the given constraints, their results indicated the homespun PP fabric achieved effectiveness bordering on N95 thresholds, and suggested the PP+PS blend might easily meet N95 criteria for up to 17 hours of use. One interesting, ancillary finding reinforced how the effectiveness of surgical masks is highly dependent on fit - particle penetration dropped from 50% to 12% after establishing a taped seal. I'd be really interested to see the results of more rigorous, independent testing conducted using the same equipment as NIOSH certification facilities, including oscillatory respiratory air flow (to simulate the dynamics of inhalation and exhalation). Some alternate links to the paper in case the one above becomes unavailable: https://web.archive.org/web/20201128172100/https://sci-hub.se/10.1098/rspa.2020.0469 https://web.archive.org/web/20201128172100/https://sci-hub.s... https://www.docdroid.net/nggudWv/bandi2020-pdf https://www.docdroid.net/nggudWv/bandi2020-pdf https://archive.is/buctS https://archive.is/buctS
- elil17 6y agoAre there any projects to help manufacture these? Maybe to give them to front line workers?
- sjg007 6y agoThis is great news.
- vaccinator 6y agocan I tape a large chunk of cotton candy to my face?