11 ms·
Seriously. Brother has sold laser printers under $100 for many years now -- they're reliable and last seemingly forever, and toner is cheap. Why any average co
by crazygringo 6y ago
Seriously. Brother has sold laser printers under $100 for many years now -- they're reliable and last seemingly forever, and toner is cheap.
Why any average consumer buys inkjets anymore is a mystery to me.
If you need to print documents for personal or basic business use, a B&W laser printer is the way to go. If you need fancier printouts of slides or product info to hand out to clients, a color laser printer is the way to go.
And if you need to print photos, order them online from a professional photo printing service.
I don't actually understand who the market for home inkjet printers is anymore.
(Inkjets have their place for certain niche uses like larger-format photography printing, but that's not really the "home" market anymore, more a professional or at minimum prosumer market.)
- calmworm 6y agoAgreed. Inkjet makes little sense. I’ve had a $60 (on sale) Brother laser printer for 10+ years. I finally had to buy new toner just this year. Still prints like the day I bought it.
- qes 6y agoI had a B&W LaserJet for so long that I couldn't easily get it to work on Windows anymore, which is rare, especially for a basic printer. It seemed likely possible as a slightly later but very similar model was still in the included drivers, but it was a decade+ old. Even color laserjets are decently cheap these days.
- simias 6y agoI think many people don't know better and when you go to a store you see ultra-cheap inkjet that can print in color or significantly more expensive B&W laser (or much more significantly expensive color laser, that's still not as good for pictures) and if you don't know any better it's hard to justify going for the laser. I suspect that they might also be a strange factor that inkjet managed to corner the market by being crap, and not despite of it. People now effectively expect two things about personal printers: - They're cheap - They're crap TFA is an example of this mindset. But then if you go to the store expecting to get a piece of shit printer, you're clearly going for the cheapest available option. Which means that you get a crap inkjet that you'll have to replace in two years, and then you'll buy an other crap cheap inkjet. But I agree with both of you: after a few iterations of this cycle I finally decided to know better and bought the cheapest Brother B&W laser printer and it's been a joy. It just works.
- heelix 6y agoI had to google, and found I picked up my Brother HLL8350CDW (color, wireless, 4 independent colors) back in 2014 for $377 on Amazon. Thing has been rock solid - surviving both my daughter's high school years and my Bride using heavily for her work. When that beast finally dies, another Brother - no questions.
- vxNsr 6y agoUp until about 6 months ago I woulda agreed with you but in the last 6 months all my brother printers have had odd connection issues, something about the driver changed and now I need to restart the print spooler each time I want to print something.
- bryanrasmussen 6y agoIf you don't buy a crap inkjet but instead get a more expensive one you're looking to get ripped off when the manufacturer stops producing the special ink cartridges you need for your super cool expensive inkjet. Printers were the trial run for how to do customer relations on the IoT.
- dmitryminkovsky 6y agoAgree and second the Brother $100 laser printer. Have several, all work great.
- fbelzile 6y ago> Why any average consumer buys inkjets anymore is a mystery to me. Probably because retailers try their best to steer customers to them because of higher profit margins on ink.
- tootie 6y agoI bought a refurb Brother for like $90 (black and white) and it was setup and working over WiFi in 15 minutes. My kids use it freely. Print quality is sharp and it hasn't jammed once.
- hunta2097 6y agoI went though around 4 crappy unreliable inkjets before getting myself a Brother HL-3150CDW. It's been ultra reliable and fast, even though I only print about 2-3 pages a month. It has a super low-power standby and is always ready.
- roel_v 6y agoDid you measure power usage? I've found printers, even in standby, to be surprisingly large power consumers.
- sterwill 6y agoI bought a HL-3170CDW years ago and I've had the same experience. Bought a couple new black toner carts, and maybe one set of color ones, all OEM. Affordable supplies compared to my previous Samsung color laser (toner got outrageously expensive after 2 years of owning it).
- js2 6y agoI followed this advice and apparently ended up with the one garbage laser printer that Brother makes. The fuser roller melted and Brother's warranty service was impossible to navigate. Ended up replacing it with an HP Office Jet that's worked fine for years. I participate in the HP ink hostage program but you know what, it's worth it to me for the hassle it saves.
- bluedino 6y agoThey are the best options for home users. But I’ve had businesses buy them and they will last about 5,000 pages and then they either fail completely or you spend more money on a new fuser than the printer costs. Worth it, though. Most will replace it every few months if they are using them to print a lot.
- pilsetnieks 6y agoI'm not sure your piece of anecdata is representative of the whole. My piece of anecdata is that we have several Brother printers at work, the oldest of which has been going for 7 or 8 years and the page counter shows somewhere around 150,000. We did change the fuser unit once but it was around the same cost as a toner cartridge.
- Moru 6y agoBrother (and all others) make different grades. You can pay a little more for a printer that is rated for more prints before needing a new drum. At work we were chewing through 2 brothers per year of the cheaper consumer grade type. Paid just a little more for an office version and it lasted until we stopped with faxes a few years ago. Now they bought an HP without asking me and it just sits in a corner because no-one can get it to work for very long. On the other hand paper usage is way down now so eco friendlier :)
- jessriedel 6y agoOver the past five years, I've bought two HP printers (based in part on recommendations from the Wirecutter) and then three Brother printers, and have also read a dozen HN posts like this. My summary is that Brother is the way to go, period. The HP printers are constantly fighting me by, e.g., demanding internet access to print, failing to print when HP servers temporarily go down, putting up baffling errors, etc. The Brother printers just work. The fact that Wirecutter recommended HP when Brother is so clearly superior has forever lowered my faith in their recommendations.
- ag56 6y agoI have the exact same story, and I too now mistrust the Wirecutter!
- frogpelt 6y agoProduct reviews are flawed. They are biased toward things that work well for the first month. And furthermore, Wirecutter uses affiliate links to make money. And then they got bought by NYT. So, they definitely aren't completely unbiased.
- kwillets 6y agoMe three. HP just gave me a bad feeling.
- WrtCdEvrydy 6y agoBrother makes a basic AF black laser printer that costs $88 (back when I bought it). It's been 4 years and I have yet to replace the replaceable materials (toner). I was planning on upgrading but I don't wanna throw away useful hardware.
- verisimilitude 6y agoI have that same one. I've had it for years and years. Here's a message for your future self: that printer has a very important, very small piece of plastic inside it that occasionally breaks and it won't grab paper internally. The part number is LY2579001 and here's how to replace it: https://www.youtube.com/watch?v=zcZ5gF0t7Kc https://www.youtube.com/watch?v=zcZ5gF0t7Kc
- TheSpiceIsLife 6y agoAbout 12 years ago I stumbled upon second hand Brother laser printers and haven't looked back. They've even worked in Linux using the Windows driver and some sort of wrapper I found just searching online. I've currently got a Brother HL-2132 I paid $AU30 for sitting on my desk in a dusty metal fabrication workshop. When the printer tells me the toner is low I start looking for another same or similar model just for the toner cartridge. When the drum goes I just switch over to the next second hand one. The current one has only had two paper jams that needed the printer blowing out with compressed air, despite the dust in the workshop being full of metal particles and grinding disk particles.
- stevepike 6y agoSecond this. I don't know what toner prices are over there but I've got a used Brother HL-2170W that I got for $20 and it works great from linux, mac, and windows. I've been able to refill it with generic toner @ $25 / two pack.
- TheSpiceIsLife 6y agoIt hadn't occurred to me to try to refill them, might give that a go if / when I get through the two spares I have at hand/
- stevepike 6y agoSorry I didn't mean refilling the existing cartridge. You get entire replacement cartridges like https://www.amazon.com/dp/B07C3X6HFG https://www.amazon.com/dp/B07C3X6HFG
- TheSpiceIsLife 6y agoOh, that's even better. Cheers :)
- sfifs 6y agoSay you have a kid in elementary school. Say you need to print something for a school project or even a home craft she's doing urgently (because if course kids don't plan long term - else they wouldn't be kids). BW prints look ugly. Color lasers are crazy expensive. Inkjets suck but the come with reasonably priced nice colour and photo paper printing options with a scanner built in. The inks are expensive but you're not printing much anyway. It's a hell of a lot more convenient to just fire a print from the printer at home than check if the nearest print shop is open and mount an expedition (Source: Switched from laser to inkjet)
- codegrappler 6y agoI picked up a Canon color laser for $180 last Black Friday. They’re way cheaper than they used to be.
- sfifs 6y agoGood to know! Will consider for my next replacement
- mypalmike 6y agoColor lasers are not crazy expensive anymore. I bought a Xerox color laser about 8 years ago for under $300. It's one of the best hardware purchases in terms of value for money I've ever made.
- roel_v 6y agoDon't buy modern Xeroxes though! I have a Versalink with huge useless OS that takes forever to boot and errors that require multiple reboot to 'fix'. Guy on the phone said it was because of drivers on client machines (what sort of crap printer crashes when there is a wrong driver installed?) but evrn with his updated version it hasn't fully gone away. I've had Xerox for 20 years but this will be the last one.
- mypalmike 6y ago
- bolotye 6y agoColor laser has actually pretty terrible color, especially for photos, prints or any output that requires any sort of vibrancy or color accuracy. Epson makes some excellent inkjet printers. The cartridge based ones are expensive to run, but their eco tank offerings have pretty good output and are cheap enough to run - still no eco tank model is photo print grade, but the 5 ink version isn’t bad and not too expensive. Ink is a messy, nasty media, but is almost unavoidable if you want good to great color quality.
- benjaminl 6y agoMy color laser provided significantly better color than any of the inkjet I have used. It provided nice even color. Whereas the inkjet color was often banded.
- desiarnezjr 6y agoYeah most inkjet printers still suck. The Epson mid range to high end tend to be decent to great. The photo printers also have archival grade inks, some of which are rated for 80 years. I wouldn't buy a general consumer inkjet though.
- TheOtherHobbes 6y agoHigh-end art/photo printers have the same ink cost problem as consumer inkjets, but on an industrial scale. I used to have an Epson A2 printer and a full set of inks cost more than £500. You can get ink reservoir systems but they're messy and rather fragile. Although they do pay for themselves if you're printing at scale.
- fl0wenol 6y agoIf you want great color you should get a dye sublimination photo printer instead, nothing beats the finish on those, and they're colorfast in water. Only trick is they recently tend to run small for producing 4x6s for frames or scrapbooking. Letter or A4 sizes are less common and more expensive. I'd check eBay to be honest, for used stuff like the Sony UP75D.
- gitgud 6y agoI've had a black and white fuji-xerox laser printer for 6 years now about $120 new Used about 6 reams of paper (I don't print that much really) and haven't replaced the ink cartridge once! Still works great. Here's the printer: https://www.fujixerox.com.mm/en/Products/MM-Printers/DocuPrint-P265-dw https://www.fujixerox.com.mm/en/Products/MM-Printers/DocuPri...
- 2fast4you 6y agoBrother printers are rock solid, I have never had an issue with mine
- nine_k 6y agoFrankly, color laser printers that would print a decent photo cost a lot, and the quality is but decent, not perfect. An inkjet which can do justice to a photo is also usually not as cheap, its inks cost like French perfume (and sometimes there are 6 of them, not 4), and you also need to use expensive photo-quality paper. This allows you to have really great photos. Using such a device for printing business documents or school handouts is wasting it. So yes, go with a laser, a color laser if you need, and just take your photo printing to a good lab, they usually have one of these inkjet beasts anyway.
- paulmd 6y agoAnd the really nice thing about Brother is there's none of this "500mb universal printer driver" shit. Want just the printer driver? 10 mb. Want linux drivers? Here's CUPS drivers. They sell you a printer, here's drivers that work, end of story. I adore (and have always adored) my Brother B+W lasers and am thinking about one of the color lasers one of these days, especially now that I am living at home instead of having access to a Xerox network copier at work (we are allowed reasonable personal usage of office supplies, no worries). The Brother fan club is loud and for very good reason. In contrast (I had a brother B+W at home) I owned an HP color laser for my office at school, and nope, never again, the driver package was fucking terrible and while I could usually get it to work after some finangling, it was constantly a pain. Literally threw it in the trash and got a B+W brother MFC instead even though that was a "step down".
- blux 6y agoI recently bought a dirt cheap Brother B+W printer to replace a Canon inktjet printer and am very happy with the decision. It is a small printer, Windows/Linux network printing is easy to setup and just works. My only gripe with it is that it only supports 2.4GHz WiFi. It has been a pleasure to use the printer again.
- paulmd 6y ago> My only gripe with it is that it only supports 2.4GHz WiFi I noted the same thing and eh. While this means your router has to continue to support a 2.4 GHz AP, I don't think that's an unusual decision as far as the "internet of things", due to cost reasons (as opposed to migrating every IOT to 5 GHz). I think you will have to maintain all three now. Devices are eventually going to segregate themselves onto their own networks: 2.4 GHz for legacy / low-cost / IOT, 5 GHz for data rate, wigig/wifi 6/etc for extreme data rate. The performance hit on your other bands should be minimal even considering contetion. There's no sense updating the wireless module for faster wifi and probably not any sense updating past 100 mbit wired ethernet either. > I recently bought a dirt cheap Brother B+W printer to replace a Canon inktjet printer and am very happy with the decision. Do note that canon inkjet printers can often be easily retrofitted for bulk "continuous tank" ink, which can actually make them surprisingly affordable to run as far as inkjets go! The ink itself isn't really that expensive, just packaging (it's a "priced according to demand" product). I'd look at bulk ink "cost per page" for photo before you toss it. I think it'll probably still work out to being economically cheaper per page to get a brother B+W or color laser but if you can argue the bulk ink inkjet with printing some photos or school projects at home then maybe. Laser (color or B+W) is cheaper for b+w and occasional color presentation, and sending out to costco/kinkos/whatever is better for photos or premium presentation. (There still is no comparison to professional photo printers of course - check out White House Custom Color, despite the "we're a pro service house! what is your professional account number" facade they're open to you even if you just want a couple family photos printed nice, and they have equipment and expertise you don't. Work out your cost per page and if you fuck up once on a big print you probably lose vs just sending it out, I bet.)
- mitchdoogle 6y agoI've only ever considered purchasing an inkjet because of the many special use cases it has out of the box with standard ink: photos, transparencies, stickers, shirt transfers, and more. I know some lasers can do these things, but color laser printers are a lot more expensive and the quality is lacking in my experience.
- howlgarnish 6y agoI recently bought a random cheap Canon PIXMA inkjet, and with proper photo paper, the photos it prints are indistinguishable from what you'd get from a regular photo printing service. No smudging, no bleeding, nada. It also uses big refillable ink tanks that are way cheaper and longer-lasting than overpriced HP-style disposable cartridges. Now I'll admit that from a strict dollars-and-cents perspective, it's probably still more expensive per picture than using a photo service, but it's way more convenient. And it does a fine job with B&W printing too.
- GordonS 6y agoI had a Canon PIXMA around 5 years ago (I forget the exact model number), and it wasn't great. It could print decent photos, though I'd say ones from a professional print shop were still obviously superior. But it had all the usual inkjet problems - eating copious amounts of ink and needing constant maintenance.
- abiogenesis 6y agoThere is also the issue of longevity. Some inks (dye vs pigment) and some papers are more susceptible to fading: https://www.reddit.com/r/photography/comments/791fpe/inkjet_print_longevity/ https://www.reddit.com/r/photography/comments/791fpe/inkjet_...
- AlexTWithBeard 6y agoBrother printers. +1 here A credit must be given when it's due. They're reliable, reasonably priced and have Linux drivers.
- watwut 6y agoBecause home users are primary needing printer for those annoying homework projects. And being able to print in color late in the evening for cheap is massive help for that. I bought color printer for much less then 100$.
- tuatoru 6y agoI print on photo paper to make front panels for electronic projects. It's fine under thin acrylic sheet. Yeah, the toner transfer method[1] produces superior results, but when it's gear for my own use, I cant be bothered with the faffing around. Sometimes I print photos too, just to have them around. With me it's "out of sight, out of mind", so I like to have the physical object as a reminder of something. Using your own printer on site has much less friction than using an upload-and-wait service. All that said: yes it's getting to be a niche thing these days. 1. Laser print a reversed image in heavy lines onto an overhead transparency sheet, then use a hot clothes iron to melt the toner onto your shiny aluminium front panel. Three layers, tea towel, OHP, front panel. Then spray your panel with satin or semi-matte clear lacquer--once you've scrubbed off the metal front panel and repeated the printing and ironing often enough to get something that looks OK.
- xlii 6y agoI just can't praise Brother laser printer high enough. I own one for few years and it is cheap to maintain and never let me down so far. Last Saturday my SO tried to print something but printer refused to work (I thought it finally gave up). She told me to fix it (ugh..), I got to the printer with my computer but then got message from colleague, which I decided to prioritize ;-) After 4 minutes, with me not touching anything printer decided it'll print and spew out few pieces of neatly arranged printed papers. Looks like it lost wi-fi connectivity but was able to reconnect and do the printout. Of course I took the praises.
- RobinL 6y agoAgree with everything you say. One thing I have been surprised by is the quality of photo prints from my colour laser (Brother dcp-l8410cdw). Admittedly, my expectations were very low, and it's certainly a long way off high-quality professional printing. But for something temporary like a photo to pin to the fridge for a few weeks, it's actually good enough. I think this is relevant for quite a bit of the market. Most people getting photo prints online don't seem to care much about quality - the results vary a lot between companies and many cheap ones are really bad. I'd say the colour laser get fairly close to bad ones ordered online, and is significantly better in quality to some other photo products (custom birthday cards, that sort of thing). So I think for many causal users/uses it's pretty viable
- ChrisMarshallNY 6y agoAnyone remember dye-sub printers[0]? They actually created very nice, waterproof prints. I think inkjets ended up knocking them out. [0] https://en.m.wikipedia.org/wiki/Dye-sublimation_printing https://en.m.wikipedia.org/wiki/Dye-sublimation_printing
- gbil 6y agowhat do you mean "remember"? I'll never ditch my Canon selphy one, the best 4x6 photo printer. I wish I could get one with a bigger printing size
- elorant 6y agoI bought an Epson inktank inkjet b&w printer a few months ago. This thing is a beauty. Printing cost is ridiculously low , way lower than with a laser printer. A bottle of ink costs €10 and lasts for 12k pages. Sure, the speed is nowhere near that of a laser and neither is the functionality, but that just doesn't matter if you can print a 200 page document with less than €1 including the paper.
- 43920 6y agoI had one of those too, and it worked great for about 6 months, until one of the print nozzles became clogged. It turns out that on most printers, the print heads are part of the cartridges (=replaceable), but on the ecotank printers they're built-in to the printer - so if the printer's built-in cleaning system doesn't work, it's almost impossible to unclog.
- itsmeamario 6y ago> And if you need to print photos, order them online from a professional photo printing service. If you're in the need (like me right now) to print +300 photos in several formats, even shopping at best prices around me, that's something like 150€ for them. For that kind of price I could get a nice home printer, supplies, and afterwards just keep the printer for the future.
- morsch 6y agoI'd like to see your BOM. ;) I'd estimate 10-20 EUR for high quality paper; undoubtedly the ink supplied with the printer will not be enough to print 300 photos, that's another 40-80 EUR, leaving 50-100 EUR for the printer. Are the prints from a ~100 EUR printer really equivalent to professionally developed prints?
- GordonS 6y agoAnd assuming the OP meant an inkjet printer, they'll probably go through 4 whole sets of cartridges to print 300 photos. And they'll need to "realign the heads" and "clean the nozzles" at least 17 times, which will consume hours of your time, paper, and probably another whole set of cartridges too. I battled with Epson and HP inkjets for years - I haven't looked back since I bought a small black and white Brother laser a couple of years back. No more wasting time, no more new cartridges every 5 pages - you just hit print and it prints.
- moepstar 6y agoI think that'd be a use-case for HPs "ink hostage" (instant ink or something like that), as another commenter put it, program. If i recall right, i even read somewhere here on HN that someone basically printed full page color prints all day long and HP happily keeps sending him fresh cartridges, which is, at the rate he is paying monthly, a steal... I guess nothing stops you from ending your membership after you're done with your printouts :)
- jwr 6y agoYes. Get a Brother laser printer, and be done with it. I've also been using a Lexmark printer for several years now, from the "workgroup" class. These are more expensive, but generally better built and if you print a lot, you can use larger toner cartridges which come out fairly cheap per page. But Lexmark software has weird quirks and you inevitably end up having to reset your printer, because it isn't on WiFi for some reason (have you tried turning it off and on again?). None of that with Brother. You plug it in, set it up, and you're done, works with all of your devices (including iOS).
- yourapostasy 6y agoI'm looking for a Brother duplexing color laser that works with their Mac drivers. I have the HL-3170CDW but it has a known issue with Macs waking up from sleep; it isn't a problem on Windows, Linux, or iOS, but with the latest firmware and latest drivers on the latest macOS patches, freshly power cycled and then allowed to sleep in low-power mode, it will intermittently not power up, though I see the print job spooling down from the flashing LED. Power cycling the printer always kicks the print job out, but I'm not a fan of that much power cycling. Has anyone else run into this with their Macs in one of the older generation model Brothers and found a later Brother model that permanently fixes this behavior? Other than that I agree, Brother all the way.
- dmayle 6y agoSince 2009, my requirements for a printer has always been: * Color (switched away from laser for this) * Printing and scanning (all-in-one) * Duplex printing and scanning * Automatic Document Feeder * Network print/scan (Wireless and sometimes ethernet) Before that, I'd been very happy with the Canon Pixma inkjets, and so I upgraded to the Pixma all-in-one (MX860, and later MX870), and I've sworn by this line. Reasonable ink/printing prices, great performance, fantastic network support. Two years ago, we moved temporarily, so I bought a bargain basement Pixma TR4550 that checked off all of the boxes, but it was terrible. The first time my wife used it, she thought it was garbage. We made do, but I knew I wanted to change. A year ago (after moving again), I had to add a requirement to the list. My new daily computer was a chromebook, which doesn't have scanning support, so I wanted a printer with some sort of scan-to-cloud solution. I was also eyeing color laser printers, which are now at reasonable prices, since I used to prefer laser printers before color became a requirement. Enter the Brother MFC-L3750CDW, which I bought for $340. It's a color laser all-in-one with everything I wanted (including ethernet)... and it supports both scan-to-Google Drive and scan-to-email! This printer is nothing short of amazing. I've never printed from my phone before, but my wife and I both do this regularly now. I have two shortcut buttons in the interface, one for scanning directly to my email, one for my wife's. I have never installed a printer driver, every OS I've tried just prints directly to the thing (it's autodiscovered when adding). In short, Brother laser printers for the win!
- frenchman_in_ny 6y agoMy Epson printer just died an untimely death, after ~10 years of decent service. I am exactly in the same use-case as you (color / multifunction / ADF / network & Chromebook) and spent hours trying to get some of the Canon printers working with a Chromebook. But I'm not finding that printer anywhere at a reasonable price!
- MrBuddyCasino 6y agoPeople think they need color, and they are not aware that it is an immutable law of nature that inkjets suck. Luckily this is easily solvable. Inkjets suck. You don't need color. Buy a Brother.
- leokennis 6y agoI sort of disagree with this article, except the fact that inkjet ink is overpriced. I have a 5 year old basic consumer grade Canon color inkjet with a scanner built in. It's wireless, I can quickly print a photo on photo paper (no waiting multiple days for a printing service), any BW document I'm likely to print in 2020 (and let's be honest...how many documents do you really need to print in 2020?) come out at 10 pages per minute or so. It prints in duplex. Ink is about €50-€75 per year. I've had one paper jam in 5 years, solved by pulling one handle and removing a crumpled piece of paper. I have way more issues with my €1500 laptop or my €800 phone than with my €100 inkjet printer.
- ghaff 6y agoYeah, just last weekend, I was checking out various equipment in my office. I have a large format photo quality inkjet but one cartridge is empty and the other two are dried out. Would cost me over $100 to refill it and I just don't use it enough to keep the cartridges fresh. Not worth buying new cartridges for it. My B&W laser is fine for most things, the few photos I want printed are easily done online on choice of media and size, and if I decided I really have to print in color at home, I'd replace my B&W laser with a color laser printer.