37 ms·
> Note that this can only be done because both systems are 3.3v Glares at system that ran RS232 levels (-12 & +12) into 5V Atmel MCU 24/7 for a couple years su
by Scoundreller 6y ago
> Note that this can only be done because both systems are 3.3v
Glares at system that ran RS232 levels (-12 & +12) into 5V Atmel MCU 24/7 for a couple years successfully
- d-sc 6y agoWait what? Uart is active low. So it’s not to hard to bump the 12V down to 5V, but what happened with the -12V?
- Scoundreller 6y agoJust saying a 5V device had no problem interpreting -12 as 0 and +12 as 1 (wayyyy out of specs). And the serial port accepted 5 as good as +12 and 0V as -12V. No level shifting. Did require inverting in code since RS232 uses -12V as logic 1 and +12 as 0.