5 ms·
This bend-insensitive fiber the article mentions, combined with the narrower diameter than Cat-6, might make it more practical to run across the tops of mopboar
by neilv 6y ago
This bend-insensitive fiber the article mentions, combined with the narrower diameter than Cat-6, might make it more practical to run across the tops of mopboards in my rented apartment.
WiFi speeds are usually OK, but the apartments density is so high here (and new `xfinitywifi` APs are often popping up on my channel), that I'm almost ready to move back to cabled for most purposes.
- zamadatix 6y agoYeah can confirm for the same use case though I use Ubiquiti Edge Router X SFPs off a Ubiquiti Edge Router 12P so I get more ports. Of course at this point we're close to Wi-Fi 6E hardware and I probably wouldn't have done all of this at this point.
- swiley 6y agoI switched to cable when I moved to an apartment. Channel 11 was becoming unusable right around 8:00 every morning when all the WFH people got online. My apartment has a nice patch panel though so I don't have to actually run cables everywhere.
- Dylan16807 6y agoWere you stuck with 2.4GHz for a reason? I can't imagine how bad that would be in an apartment.
- reaperducer 6y agoDepends on the apartment. In some, it's not as congested as it used to be because so many people have moved to 5GHz. It's still amazing to me, though, that so much new gear is still 2.4GHz only. I bought a brand-new, top-of-the-line air filter earlier this year, and even at close to $500, 2.4GHz is the only option.
- gambiting 6y ago....why would an air filter have WiFi in the first place?
- reaperducer 6y agoYou could ask the same thing about light bulbs, but they do.
- Dylan16807 6y agoYou often want to control brightness and possibly color on light bulbs, and it's good if that can be integrated with other systems so you can have central control and automation. Wifi may not be the best way to connect, but it's reasonable. With an air filter, do you ever want to control it? Naively I'd think that you'd want to leave it on unless you're going to be gone for a week or more. And even in that case it's probably easier to flip the switch. Would it tell you when it needs a filter change? Would that actually work better than a calendar?
- s_fischer 6y agoWhile I somewhat agree with you, it's possible to do some pretty advanced/nifty things with advanced automation platforms like Home assistant. There are prebuilt extensions for things like air quality index, so in theory, you could set up a rule to run your air filters when the exterior air quality is above a certain threshold of dirty. The same could be done for indoor air quality if you had a local sensor monitoring it (can be done pretty cheaply with a Pi but I've seen off the shelf products as well)
- postit 6y agoThey are so thin I covered mine with the wallpaper
- deleted 6y ago[deleted]
- tyingq 6y agoA quick search shows that single strand fiber is available with a white outer color. That would almost visually disappear in your mopboard example.
- iptrans 6y agoYou can get fiber even as a translucent version, that is almost “invisible”.
- TD-Linux 6y agoIf you want thinner than normal Cat6 but can handle a bit more than 0.9mm, there is also thin Cat6 available: https://www.monoprice.com/product?p_id=34213 https://www.monoprice.com/product?p_id=34213 It's 2.6mm diameter, and I had success running it between baseboards and carpet.
- neilv 6y agoThanks! I'll have to try at least one run of this thin Cat6.
- luckylion 6y agoThere's also powerline, which works very well for me and all you need are power sockets to bridge the distance between your desk and the router.
- iptrans 6y agoPowerline can have major problems, depending on the quality of the electric wiring. In addition to that latencies are bad.
- jon-wood 6y agoI once had powerline networking which somehow ended up joining my next door neighbour’s powerline network. That was a bizarre evening of trying to work out why my connection was sometimes fine, while other times unusably slow - turns out I was occasionally getting DHCP responses from next door’s router, and unsurprisingly the available bandwidth across RF interference between two power sockets back to back on opposite sides of a wall leaves a lot to be desired.
- tuananh 6y agothat's funny. how did you find out?
- jon-wood 6y agoThankfully the neighbour did freelance networking, so the domain being handed out to DHCP clients on their network matched the business name. It turned into quite a friendly relationship with them, I hadn't previously known that they were in the tech world as well.
- greenknight 6y agodepending on the electrical wiring, latencies may not be that bad. Ethernet is usually <1ms.... powerline adapter i use is about 2ms.... wifi to the same router, is 40ms. 2ms is much more manageable for me than 40ms