2 ms·
I’m surprised there’s nothing about storage conditions. Is it the plastic or the metals breaking down? If it’s plastic, humidity probably has a bigger impact.
by Scoundreller 6y ago
I’m surprised there’s nothing about storage conditions.
Is it the plastic or the metals breaking down? If it’s plastic, humidity probably has a bigger impact.
Lower temps are almost always better. Freezer is good. Hard to say if an oxygen absorber is helpful.
Or could sparge your container with nitrogen.
- chiph 6y agoI still have some CDs from the early/mid 1980's that play, and I think this is because of two reasons: 1) Not many people owned players back then, so pressing plants weren't under much pressure from high demand, so pressing quality was higher. 2) I stored them in their jewel cases oriented vertically on the shelf, supported by the plastic fingers of the case - so no sagging from being stored horizontally. And this was indoors, away from sunlight. So far as home-burned CDs, they haven't lasted as well. Mostly because I didn't take as good care of them - I didn't have $18 or more invested in them (typical new music CD price in the 80's & 90's) so they were just tossed in a drawer.
- calyth2018 6y agoGenerally it's the photosensitive layer between the plastic and the reflective foil that goes bad. You can have the reflective layer delaminate, but CD-R bit rot usually has no observable physical changes.